PCI HCF-3.00-SH Cam Follower and Track Roller - Stud Type

No.	Brand	d	J	a	h	F	L	H	S
FTR-3.50	PCI	150.000 mm	-	-	-	-	-	-	-
PTRY-5.00	PCI	-	-	-	-	-	269.875 mm	-	-
PTRY-3.00-SS	PCI	480 mm	-	-	-	-	-	-	-
PTRE-1.75	PCI	-	-	-	-	-	-	-	4.763 mm
JNLW 1-1/2-12	PCI	55 mm	-	-	-	-	-	25 mm	-
FTRY-1.75	PCI	170 mm	-	-	-	-	-	-	-
PTR-4.00	PCI	-	-	-	-	-	-	-	-
PTRY-3.50	PCI	75.000 mm	-	-	-	-	-	-	-
PDCY-5.00	PCI	-	-	-	-	-	-	-	-
PDC-2.75	PCI	-	-	-	16 mm	-	-	-	-
PTR-1.25	PCI	35.000 mm	-	-	-	-	-	-	-
HCF-4.00-SH	PCI	-	-	-	79.375 mm	-	-	-	4.763 mm
VTRY-5.00	PCI	-	-	-	-	-	-	-	-
VTR-5.50	PCI	-	-	-	-	-	-	-	-
SCF-3.00-SH	PCI	130.000 mm	-	-	-	-	-	-	-
PTRE-1.50	PCI	30 mm	-	-	-	-	-	-	-
VTRE-5.50	PCI	160 mm	-	-	-	-	-	-	-
FTR-3.00	PCI	-	-	-	-	359 mm	-	-	-
PTRY-8.00	PCI	-	-	-	-	-	-	-	-
FTR-2.00	PCI	40.000 mm	-	-	-	-	-	-	-
JNLW 7/16-20	PCI	17.000 mm	-	-	-	-	-	-	-
VTR-8.50	PCI	-	-	-	-	-	-	-	-
PTR-2.25	PCI	120 mm	-	-	-	-	-	-	-
SCF-4.00-SH	PCI	60.000 mm	-	-	-	-	-	-	-

PCI SCCF-4.00-SH Cam Follower and Track Roller - Stud Type	B1:140 mm; B2:146 mm; G:M 190x3; d1:170 mm; Mass withdrawal sleeve:4.85 kg; Hydraulic nut:HMV 38 E; d:180 mm; Nut for removal:KM 38; G1:24 mm;
PCI VTR-3.50E Cam Follower and Track Roller - Stud Type	Labyrinth ring:2 x LOR 45; R1:53.181 mm; Max. speed for PosiTrac Plus seal:2150 r/min; S:4.763 mm; R2:21.431 mm; P120°:49.8 kN; PG:1/8 NPT; RG:3/8 NPT; Initial grease fill:87.885 g; Cap bolt:2 x 5/8-11 UNC;
PCI FFTR-1.50 Roller Bearings	da max.:8.4 mm; r1,2 min.:0.3 mm; d:5 mm; D2 ≈:16.5 mm; Basic dynamic load rating C:2.03 kN; Basic static load rating C0:0.88 kN; da min.:7 mm; Reference speed:85000 r/min; Limiting speed:43000 r/min; Calculation factor kr:0.035;
PCI VTRY-5.00 Cam Follower and Track Roller - Yoke Type	Static axial stiffness, preload class B:131 N/µm; ra max.:1 mm; C2:3.8 mm; Number of balls z:26; Attainable speed for oil-air lubrication:26000 r/min; Preload class B GB:560 N; Basic static load rating C0:29 kN; rb max.:0.6 mm; db min.:91 mm; d1:100.83 mm;
PCI VTRE-4.50 Cam Follower and Track Roller - Stud Type	da max.:57 mm; Da min.:79 mm; K:8.5 mm; r5 min.:0.6 mm; Calculation factor Y0:0.8; Basic dynamic load rating C:194 kN; Da max.:92 mm; Calculation factor Y2:1.2; Calculation factor Y1:0.81; Basic static load rating C0:204 kN;
PCI VTRE-5.50 Cam Follower and Track Roller - Stud Type	Mass adapter sleeve assembly:7.35 kg; G:M 160x3; Lock nut:KMFE 32; d:160 mm; B:32 mm; d1:140 mm; d3:210 mm; B1:119 mm; Hydraulic nut:HMV 32 E;
PCI PTR-2.00-SS Roller Bearings	Fillet Radius ra:2.00 mm; d:140.000 mm; Oil Speed Rating n2:2600 rpm; Basic Static Radial Load Rating Co:310000 N; Fillet Radius rb:1.00 mm; D:220.0000 mm; Basic Dynamic Radial Load Rating C:225000 N; Grease Speed Rating n1:1500 rpm; B:72.00 mm;
PCI VTRY-3.50 Cam Follower and Track Roller - Yoke Type	Dynamic (Cr):49.794 kN; Pu:1.868 kN; da:90 min; Grease:4 700 min-1; ra:1 max; Da:123 max; Bearing designation:6017 ; rs:1.1 mm; D:130 mm; B:22 mm;
PCI PTRE-2.00 Cam Follower and Track Roller - Stud Type	rb max.:2 mm; d:380 mm; D1 ≈:486 mm; Design variant/feature:NNU.1/C4W33; B:200 mm; Reference speed:800 r/min; da min.:400 mm; Fatigue load limit Pu:585 kN; r3,4 min.:5 mm; Mass bearing:145 kg;
PCI PTRY-4.00 Cam Follower and Track Roller - Yoke Type	T:36 mm; r1s (min):2.5 mm; rs (min):3 mm; Static (Coa):178 kN; Pu:21.550 kN; D:140 mm; Dynamic (Ca):150 kN; a:44 mm; r2s (min):1 mm; B:33 mm;
PCI FTR-3.50 Cam Follower and Track Roller - Stud Type	Basic Dynamic Radial Load Rating C:48800 N; D:190.0000 mm; d:150.000 mm; Accessories:Two Shields; Grease Speed Rating Open/Shielded n1:3000 rpm; Fillet Radius ra:1.00 mm; Oil Speed Rating Open/Shielded n2:3600 rpm; B:20.00 mm; Basic Static Radial Load Rating Co:57000 N; Sealed Speed Rating n3:0 rpm;
PCI FTRY-7.00 Cam Follower and Track Roller - Yoke Type	T:40 mm; J6:83 mm; s1:21 mm; Basic static load rating C0:7.8 kN; Hexagonal key size for grub screw N:2.5 mm; A1:12 mm; Housing material:Cast iron; RG:1/4-28 UNF; J:70 mm; A5:18 mm;
PCI VTR-2.00 Cam Follower and Track Roller - Stud Type	PG:1/4 NPT; R2:50.8 mm; da:184.15 mm; Stabilizing ring:SR-0-40; Ca:147.803 mm; S:4.763 mm; ba:103.188 mm; R1:163.512 mm; Cap bolt:4 x 1 1/2-6 UNC; J max.:749.3 mm;
PCI PTRE-1.50 Cam Follower and Track Roller - Stud Type	Calculation factor f2B:1.04; Da max.:45 mm; Reference grease quantity Gref:0.63 cm³; D:47 mm; d:30 mm; r3,4 min.:0.2 mm; Db max.:45.6 mm; Basic static load rating C0:4.3 kN; Attainable speed for grease lubrication:26000 r/min; Static axial stiffness, preload class C:109 N/µm;
PCI PTR-2.00 Cam Follower and Track Roller - Stud Type	r, r1,2 min.:1 mm; Mass inner ring:0.31 kg; F:80 mm; B:35 mm; d:70 mm;
PCI PTRY-3.00-SS Ball Bearings	r1,2 min.:6 mm; D:700 mm; D1 ≈:628 mm; Basic static load rating C0:7200 kN; E:654 mm; Db max.:677 mm; Limiting speed:450 r/min; d:480 mm; da min.:503 mm; Basic dynamic load rating C:3740 kN;

PCI HCF-3.00-SH Cam Follower and Track Roller - Stud Type - HCF ...

Offer 265.5 mm l6 max. High Quality Brand PCI HCF-3.00-SH Cam Follower and Track Roller - Stud Type .Contact Us Online NTN BEARING CORP.

PCI Cam Follower HCF 3.00 SH

This is a new PCI HCF 3.00 SH Cam Follower that is still in the box with all original packing materials. Pictures are of actual item, box was opened for ...

PCI Cam Followers Stud Hex Bearing 3" Dia. HCF-3.00-SH for sale ...

Find many great new & used options and get the best deals for PCI Cam Followers Stud Hex Bearing 3" Dia. HCF-3.00-SH at the best online prices at eBay!

PCI HCF-3.00-SH CAM FOLLOWER STUD STYLE ...

The HCF-3.00-SH is produced by PCI and is described as a PCI HCF-3.00-SH CAM FOLLOWER STUD STYLE SEALED HEX BEARING CAM FOLLOWER HEAVY STUD 3 DIAMETER.