PCI PDC-3.00 Cam Follower and Track Roller - Stud Type

No.	Brand	d	J	a	h	F	L	H	S
CIRE-5.00E-1	PCI	75.000 mm	-	-	-	-	-	-	-
PTR-4.00	PCI	-	-	-	-	-	-	-	-
MPTR-76 SPECIAL	PCI	-	-	-	-	-	-	102.5 mm	-
FTR-2.50-SS	PCI	12.000 mm	-	-	-	-	-	-	-
YSH-1.000-SS	PCI	-	-	12.779 mm	-	-	-	-	-
PTR-1.50-SS	PCI	45.000 mm	-	-	-	-	-	-	-
HCCF-3.00-SH	PCI	45 mm	-	-	-	-	-	-	-
VTRE-4.50	PCI	-	-	-	-	-	-	-	-
SCFE-2.50-SH-THT	PCI	200.000 mm	-	-	-	-	-	-	-
FTR-2.50	PCI	-	-	-	32.544 mm	-	-	-	-
FFTR-1.50	PCI	5 mm	-	-	-	-	-	-	-
PTR-1.00	PCI	-	-	28 mm	-	-	-	-	-
HCF-6.00-SH	PCI	-	-	-	-	-	-	-	-
PDCY-5.00	PCI	-	-	-	-	-	-	-	-
VTRE-3.50	PCI	85 mm	-	-	-	-	-	-	-
CTRY-3.00	PCI	300 mm	-	-	-	-	-	-	-
CIR-3.00-SS	PCI	30.000 mm	-	-	-	-	-	-	-
HPDC-3.00	PCI	-	-	-	-	-	-	-	-
PTR-2.00	PCI	70 mm	-	-	-	80 mm	-	-	-
PTRE-1.50	PCI	30 mm	-	-	-	-	-	-	-
SCCF-4.00-SH	PCI	180 mm	-	-	-	-	-	-	-
PTR-5.00	PCI	50 mm	-	-	-	-	-	-	-

PCI HCCF-3.00-SH Cam Follower and Track Roller - Stud Type	Da max.:70.4 mm; Basic dynamic load rating C:28.6 kN; ra max.:1 mm; db min.:49.6 mm; Fatigue load limit Pu:0.95 kN; Calculation factor f2D:1.09; Number of balls z:17; Calculation factor fHC:1.02; Calculation factor f2B:1.02; d:45 mm;
PCI SCFE-2.50-SH-THT Roller Bearings	Basic Static Radial Load Rating Co:245000 N; Fillet Radius ra:2.00 mm; Basic Dynamic Radial Load Rating C:216000 N; D:310.0000 mm; Oil Speed Rating Open/Shielded n2:2400 rpm; Grease Speed Rating Open/Shielded n1:1900 rpm; d:200.000 mm; Sealed Speed Rating n3:1300 rpm; Accessories:Without Accessories; B:51.00 mm;
PCI VTR-5.50 Cam Follower and Track Roller - Stud Type	r3,4 min.:1.6 mm; Dimension series:LM 503300; Calculation factor e:0.4; ra max.:3.6 mm; Da min.:67 mm; Ca min.:3 mm; B:18 mm; D:75 mm; Calculation factor Y:1.5; r1,2 min.:3.6 mm;
PCI VTRE-4.50 Cam Follower and Track Roller - Stud Type	da max.:57 mm; Da min.:79 mm; K:8.5 mm; r5 min.:0.6 mm; Calculation factor Y0:0.8; Basic dynamic load rating C:194 kN; Da max.:92 mm; Calculation factor Y2:1.2; Calculation factor Y1:0.81; Basic static load rating C0:204 kN;
PCI PTR-2.50 Cam Follower and Track Roller - Stud Type	Permissible sliding velocity v min.:0 m/s; Tolerance housing:H7; Specific dynamic load factor K:140 N/mm²; Mass bushing:0.1 kg; Specific static load factor K0:200 N/mm²; d:65 mm; Coefficient of friction µ max.:0.08; Coefficient of friction µ min.:0.03; B:50 mm; Permissible sliding velocity v max.:0.5 m/s;
PCI YSH-2.750 Roller Bearings	d:12.000 mm; Oil Speed Rating n2:24000 rpm; Grease Speed Rating Open/Shielded n1:19000 rpm; B:12.00 mm; Basic Dynamic Radial Load Rating C:9750 N; Accessories:Two Shields & Snap-R; Grease Speed Rating n1:19000 rpm; Sealed Speed Rating n3:14000 rpm; D:37.0000 mm; Basic Static Radial Load Rating Co:4150 N;
PCI VTRY-3.50 Cam Follower and Track Roller - Yoke Type	Dynamic (Cr):49.794 kN; Pu:1.868 kN; da:90 min; Grease:4 700 min-1; ra:1 max; Da:123 max; Bearing designation:6017 ; rs:1.1 mm; D:130 mm; B:22 mm;
PCI VTRY-5.00 Cam Follower and Track Roller - Yoke Type	Static axial stiffness, preload class B:131 N/µm; ra max.:1 mm; C2:3.8 mm; Number of balls z:26; Attainable speed for oil-air lubrication:26000 r/min; Preload class B GB:560 N; Basic static load rating C0:29 kN; rb max.:0.6 mm; db min.:91 mm; d1:100.83 mm;
PCI CTR-1.25-SS Roller Bearings	L:466.725 mm; P150°:118 kN; PG:1/4 NPT; Eye bolt:2 x 3/8-16 UNC; J1:82.55 mm; RG:1/2 NPT; N1:23.813 mm; Bearing limiting speed:3600 r/min; H2:60.325 mm; Adapter sleeve assembly:SNW 26x4.3/8;
PCI VTRY-4.50 Cam Follower and Track Roller - Yoke Type	Sealed Speed Rating n3:6300 rpm; d:30.000 mm; Basic Static Radial Load Rating Co:29000 N; D:72.0000 mm; B:33.30 mm; Accessories:One Seal & Snap-Ring; Oil Speed Rating n2:8500 rpm; Grease Speed Rating n1:6300 rpm; Fillet Radius ra:1.00 mm; Basic Dynamic Radial Load Rating C:41600 N;
PCI PTRE-1.75 Cam Follower and Track Roller - Stud Type	S:4.763 mm; Housing:SAW 530; Mass pillow block:92.5 kg; da:131.762 mm; P180°:96.1 kN; Adapter sleeve assembly:SNW 130x5.3/16; RG:3/8 NPT; Da:269.999 mm; Cap bolt:4 x 3/4-10 UNC; A1:158.75 mm;
PCI VTRE-3.50 Cam Follower and Track Roller - Stud Type	with tapered bore:1217 ; Static (Cor):50.570 kN; Pu:20.300 kN; d:85 mm; B1:mm; D:150 mm; with cylindrical bore:4 700 min-1; Grease:0.830 kN; Oil:4 000 min-1; rs Dynamic (Cr):2 mm;
PCI YSH-1.000-SS Roller Bearings	Ca min.:2 mm; D:62 mm; Cb min.:3 mm; Da max.:55 mm; db min.:33 mm; Fatigue load limit Pu:4.75 kN; Db min.:57 mm; rb max.:1.5 mm; a:12.779 mm; d1 ≈:41.5 mm;
PCI CTRY-3.00 Roller Bearings	rs (min):5 mm; d:300 mm; Dynamic (Cr):9 mm; D:500 mm; Grease:5160 kN; Static (Cor):16.7 mm; with tapered bore:850 min-1; Pu:3050 kN; Oil:415.160 kN; with cylindrical bore:670 min-1;
PCI FTR-5.00 Cam Follower and Track Roller - Stud Type	B4:34.138 mm; Hydraulic nut:HMVC 40E; Threads per inch:8; G:199.314 mm; Lock washer:W 40; d1:200.025 mm; B1:179.959 mm; Mass adapter sleeve assembly:16 kg; d3 max.:250.165 mm; B:30.429 mm;
PCI CIRE-5.00E-1 Roller Bearings	Basic Static Radial Load Rating Co:137000 N; Accessories:No Shield, no Seal; B:41.30 mm; Grease Speed Rating n1:3200 rpm; Basic Dynamic Radial Load Rating C:108000 N; Fillet Radius ra:1.50 mm; d:75.000 mm; Sealed Speed Rating n3:3200 rpm; D:130.0000 mm; Oil Speed Rating n2:4300 rpm;

PCI Procal Inc. PDC-3.00 - Industrial Bearings Inc

Advance PCI Procal Inc. PDC-3.00 is your source for quality Mcgill Bearing and accessories. shop online for home delivery or pick up in one of our ...

PCI PDC-3.00 Cam Follower and Track Roller - Stud Type - PDC ...

PCI PDC-3.00 bearing Size Chart (mm/inches). Category, Ball Bearings. Inventory, 0.0. Manufacturer Name, RIT BEARING. Minimum Buy Quantity, N/A.

08285270 PCI Procal Inc. JNLW Series 1-7/8 Inch (in) Hex Size Jam ...

Images. PCI Procal Inc. JNLW Series Jam Nut and Lock Washer Sets ... PDC-3.00. PDC-3.00-HT PDC-3.00-R PDC-3.25. PDC-3.25-R PDCE-3.00. PDCE-3.00-R PDCE-3.25

PDC-3.00-R - PCI | Cam Follower and Track Roller - Stud Type | BDI ...

Bearing, Cam Follower; 3" Roller Diameter; 1-3/4" Roller Width; Flat Roller Surface; Stud Type; 1-1/4" Stud Diameter; 1-1/4-12 Thread; Standard Stud; ...

PCI PDC-3.00 Cam Follower and Track Roller - Stud Type | PDC ...

LET OUR PCI PDC-3.00 Cam Follower and Track Roller - Stud Type EXPERTS GET YOU THE 737733 Manufacturer Internal Number PARTS Jinan Kaidong Bearing Co., ...

PCI_LBRA_DCB_Rollers_2015R4.pdf

the internal design of the bearing, PCI DCB Rollers eliminate the need for the use of a dual ... PDC-3.00. 27,600. 38,000. 13,120. 3,450. Rubber Lip FC DCRB.

Buy PCI PDC-3.00 Cam Follower And Track Roller - Stud Type

Brand Name: PCI. Model Number: PDC-3.00. G: M6x1. Weight: 1.62 kg. d: 36.51 mm. H2: 94 mm. Designation of bearing: US207-23G2T20.

PCI Procal Inc. PDC-3.00 Flat Cam Follower - 3.0000 in Roller Di ...

PCI Procal Inc. PDC-3.00 Flat Cam Follower - 3.0000 in Roller Di. |||. Make sure this fits. Product description. PCI Procal Inc. PDC-3.00 Flat Cam Follower ...