| PCI CTRY-3.00 Roller Bearings | rs (min):5 mm; d:300 mm; Dynamic (Cr):9 mm; D:500 mm; Grease:5160 kN; Static (Cor):16.7 mm; with tapered bore:850 min-1; Pu:3050 kN; Oil:415.160 kN; with cylindrical bore:670 min-1; |
| PCI SCFE-2.50-SH-THT Roller Bearings | Basic Static Radial Load Rating Co:245000 N; Fillet Radius ra:2.00 mm; Basic Dynamic Radial Load Rating C:216000 N; D:310.0000 mm; Oil Speed Rating Open/Shielded n2:2400 rpm; Grease Speed Rating Open/Shielded n1:1900 rpm; d:200.000 mm; Sealed Speed Rating n3:1300 rpm; Accessories:Without Accessories; B:51.00 mm; |
| PCI VTR-4.50 Cam Follower and Track Roller - Stud Type | a:5.556 mm; S:0.794 mm; Attachment bolt diameter G:4 x 22.225; L:247.65 mm; N1:23.813 mm; A6:31.75 mm; Basic dynamic load rating C:426 kN; J:196.85 mm; A:88.9 mm; Mass bearing unit:30.9 kg; |
| PCI VTRE-3.50 Cam Follower and Track Roller - Stud Type | with tapered bore:1217 ; Static (Cor):50.570 kN; Pu:20.300 kN; d:85 mm; B1:mm; D:150 mm; with cylindrical bore:4 700 min-1; Grease:0.830 kN; Oil:4 000 min-1; rs Dynamic (Cr):2 mm; |
| PCI YCF-3.00-S Cam Follower and Track Roller - Yoke Type | Basic Dynamic Radial Load Rating C:23400 N; d:45.000 mm; D:75.0000 mm; Accessories:Two Shields; B:16.00 mm; Grease Speed Rating Open/Shielded n1:9000 rpm; Basic Static Radial Load Rating Co:16600 N; Sealed Speed Rating n3:5600 rpm; Fillet Radius ra:1.00 mm; Oil Speed Rating Open/Shielded n2:11000 rpm; |
| PCI FTR-3.00 Cam Follower and Track Roller - Stud Type | B:118 mm; da min.:334 mm; Fatigue load limit Pu:228 kN; r3,4 min.:3 mm; F:359 mm; D1 ≈:399 mm; K:9 mm; Basic static load rating C0:2360 kN; ra max.:2.5 mm; rb max.:2.5 mm; |
| PCI FTRY-1.75 Ball Bearings | B:120 mm; Limiting speed:2700 r/min; d2 ≈:213 mm; Calculation factor Y0:2; D:360 mm; r1,2 min.:4 mm; b:16.7 mm; ra max.:3 mm; da min.:187 mm; d:170 mm; |
| PCI SCF-3.25-SH Cam Follower and Track Roller - Stud Type | Oil Speed Rating n2:6700 rpm; D:110.0000 mm; Basic Static Radial Load Rating Co:14000 N; Grease Speed Rating n1:5600 rpm; Basic Dynamic Radial Load Rating C:43600 N; d:50.000 mm; Fillet Radius ra:2.00 mm; B:27.00 mm; |
| PCI PTRY-4.00 Cam Follower and Track Roller - Yoke Type | T:36 mm; r1s (min):2.5 mm; rs (min):3 mm; Static (Coa):178 kN; Pu:21.550 kN; D:140 mm; Dynamic (Ca):150 kN; a:44 mm; r2s (min):1 mm; B:33 mm; |
| PCI PTR-1.50 Cam Follower and Track Roller - Stud Type | d:60.000 mm; Grease Speed Rating n1:5400 rpm; Fillet Radius rb:1.00 mm; Oil Speed Rating n2:7000 rpm; D:110.0000 mm; Basic Static Radial Load Rating Co:44000 N; B:22.00 mm; Fillet Radius ra:1.50 mm; Basic Dynamic Radial Load Rating C:52700 N; |
| PCI PTR-1.00 Cam Follower and Track Roller - Stud Type | a:28 mm; d2:85 mm; rs (min):1.5 mm; r1s (min):1.5 mm; T:29 mm; r2s (min):0.6 mm; Pu:25.480 kN; C:22 mm; Static (Coa):215 kN; B:29 mm; |
| PCI VTR-3.50E Cam Follower and Track Roller - Stud Type | Labyrinth ring:2 x LOR 45; R1:53.181 mm; Max. speed for PosiTrac Plus seal:2150 r/min; S:4.763 mm; R2:21.431 mm; P120°:49.8 kN; PG:1/8 NPT; RG:3/8 NPT; Initial grease fill:87.885 g; Cap bolt:2 x 5/8-11 UNC; |
| PCI FTRY-2.00 Cam Follower and Track Roller - Yoke Type | Fillet Radius rb:0.30 mm; B:12.00 mm; Grease Speed Rating n1:39000 rpm; Basic Dynamic Radial Load Rating C:10800 N; Oil Speed Rating n2:56000 rpm; d:20.000 mm; Basic Static Radial Load Rating Co:6200 N; D:42.0000 mm; Fillet Radius ra:0.60 mm; |
| PCI VTRY-8.50 Cam Follower and Track Roller - Yoke Type | Basic Radial Load Rating-Static SCO:6740 N; Basic Radial Load Rating-Dynamic DC:9800 N; Inside Diameter D:49.2125 mm; Adapter Sleeve AS:SNW11; Speed Rating-Open and Shielded-Grease OSG:6300 rpm; B:21.00 mm; Speed Rating-Open and Shielded-Oil OSO:7500 rpm; D:99.9998 mm; Fillet Radius ra:1.50 mm; Speed Rating-Single and Double Sealed Grease SDG:4300 rpm; |
| PCI 1424HD Mounted Units & Inserts | Reference speed:4000 r/min; G1:9 mm; d1:80 mm; Fatigue load limit Pu:35.5 kN; B2 ≈:56 mm; da max.:114 mm; Ca min.:1.3 mm; Basic static load rating C0:320 kN; s1 max.:7.1 mm; G:M 95x2; |
| PCI VTR-2.00 Cam Follower and Track Roller - Stud Type | PG:1/4 NPT; R2:50.8 mm; da:184.15 mm; Stabilizing ring:SR-0-40; Ca:147.803 mm; S:4.763 mm; ba:103.188 mm; R1:163.512 mm; Cap bolt:4 x 1 1/2-6 UNC; J max.:749.3 mm; |