| PCI HCF-3.00-SH Cam Follower and Track Roller - Stud Type | d1:200 mm; Nut for removal:HM 3048; d:220 mm; G2:G 1/4; B2:136 mm; G:Tr 240x4; A:9 mm; Hydraulic nut:HMV 48 E; B1:130 mm; G1:20 mm; |
| PCI VTR-1.50-SS Ball Bearings | Reference speed:28000 r/min; Fatigue load limit Pu:0.9 kN; Fw:10 mm; Basic static load rating C0:8 kN; Mass needle roller and cage assembly:0.0023 kg; Limiting speed:32000 r/min; Basic dynamic load rating C:5.94 kN; U:13 mm; Ew:13 mm; |
| PCI CIR-3.00-SS Roller Bearings | d:30.000 mm; Basic Dynamic Radial Load Rating C:30200 N; Basic Static Radial Load Rating Co:28000 N; Sealed Speed Rating n3:7000 rpm; D:62.0000 mm; Grease Speed Rating n1:7000 rpm; Fillet Radius ra:1.00 mm; B:23.80 mm; Accessories:No Shield, no Seal,; Oil Speed Rating n2:9500 rpm; |
| PCI FTR-4.00 Cam Follower and Track Roller - Stud Type | B4:16.916 mm; B:15.342 mm; B1:81.128 mm; Lock washer:W 16; G:79.68 mm; Lock nut:AN 16; Threads per inch:12; Hydraulic nut:HMVC 16E; d1:69.85 mm; Mass adapter sleeve assembly:1.45 kg; |
| PCI PTR-5.00 Cam Follower and Track Roller - Stud Type | D:130 mm; Static (Cor):52.100 kN; Da:116 max; Oil:6 700 min-1; Grease:5 600 min-1; ra:2 max; Pu:2.368 kN; Dynamic (Cr):87.400 kN; da:63 min; d:50 mm; |
| PCI VTR-2.00-SS Roller Bearings | r, r1,2 min.:0.3 mm; d:10 mm; Mass inner ring:0.0092 kg; F:14 mm; B:16 mm; |
| PCI HCF-6.00-SH Cam Follower and Track Roller - Stud Type | PG:1/8 NPT; A2:231.775 mm; Initial grease fill:232.47 g; Da:190 mm; Cap bolt recommended tightening torque:515.2 N·m; J max.:342.9 mm; End plug (suffix Y):EPR 11; Mass pillow block:44 kg; da:82.55 mm; RG:3/8 NPT; |
| PCI VTR-4.50 Cam Follower and Track Roller - Stud Type | a:5.556 mm; S:0.794 mm; Attachment bolt diameter G:4 x 22.225; L:247.65 mm; N1:23.813 mm; A6:31.75 mm; Basic dynamic load rating C:426 kN; J:196.85 mm; A:88.9 mm; Mass bearing unit:30.9 kg; |
| PCI PTRE-1.75 Cam Follower and Track Roller - Stud Type | S:4.763 mm; Housing:SAW 530; Mass pillow block:92.5 kg; da:131.762 mm; P180°:96.1 kN; Adapter sleeve assembly:SNW 130x5.3/16; RG:3/8 NPT; Da:269.999 mm; Cap bolt:4 x 3/4-10 UNC; A1:158.75 mm; |
| PCI VTRE-2.50 Cam Follower and Track Roller - Stud Type | Grease Speed Rating Open/Shielded n1:3000 rpm; D:225.0000 mm; Sealed Speed Rating n3:2100 rpm; Basic Static Radial Load Rating Co:150000 N; B:54.00 mm; Fillet Radius ra:3.00 mm; d:90.000 mm; Basic Dynamic Radial Load Rating C:186000 N; Accessories:Snap-Ring; Oil Speed Rating Open/Shielded n2:3600 rpm; |
| PCI VTR-2.50 Cam Follower and Track Roller - Stud Type | Dynamic (Cr):12 mm; D:580 mm; d:340 mm; with cylindrical bore:600 min-1; Oil:546.250 kN; rs (min):5 mm; Pu:4020 kN; with tapered bore:750 min-1; B:190 mm; Grease:7080 kN; |
| PCI FTR-2.50 Cam Follower and Track Roller - Stud Type | H2:25.4 mm; P60°:35.1 kN; Bearing:22309 E; P150°:12 kN; End plug (suffix Y):EPR 4; J min.:187.325 mm; da:45 mm; J max.:200.025 mm; Cap bolt recommended tightening torque:149.1 N·m; h:32.544 mm; |
| PCI FTRY-2.00 Cam Follower and Track Roller - Yoke Type | Fillet Radius rb:0.30 mm; B:12.00 mm; Grease Speed Rating n1:39000 rpm; Basic Dynamic Radial Load Rating C:10800 N; Oil Speed Rating n2:56000 rpm; d:20.000 mm; Basic Static Radial Load Rating Co:6200 N; D:42.0000 mm; Fillet Radius ra:0.60 mm; |
| PCI FTRY-2.50 Cam Follower and Track Roller - Yoke Type | d1:133.35 mm; Mass adapter sleeve assembly:5 kg; B1:111 mm; B:24 mm; d:150 mm; G:M 150x2; Locking device:MBL 30; Hydraulic nut:HMV 30 E; Lock nut:KML 30; B4:26 mm; |
| PCI PTR-3.50 Cam Follower and Track Roller - Stud Type | P90°:207 kN; P180°:133 kN; RG:3/4 NPT; H:358.775 mm; P120°:127 kN; A2:247.65 mm; End plug (suffix Y):EPR 21; R2:37.306 mm; Ca:95.809 mm; Max. speed for PosiTrac Plus seal:800 r/min; |
| PCI JNLW 7/16-20 Ball Bearings | Accessories:Synthetic Rubber Sea; Grease Speed Rating Open/Shielded n1:17000 rpm; D:40.0000 mm; Basic Static Radial Load Rating Co:4500 N; Fillet Radius ra:0.64 mm; d:17.000 mm; Basic Dynamic Radial Load Rating C:9560 N; B:17.46 mm; Oil Speed Rating Open/Shielded n2:20000 rpm; Sealed Speed Rating n3:12000 rpm; |