| No. | Brand | d | J | a | h | F | L | H | S |
| CTRY-3.00 | PCI | 300 mm | - | - | - | - | - | - | - |
| FTR-3.00 | PCI | - | - | - | - | 359 mm | - | - | - |
| PTRY-5.00 | PCI | - | - | - | - | - | 269.875 mm | - | - |
| SCF-3.25-SH | PCI | 50.000 mm | - | - | - | - | - | - | - |
| VTRY-8.50 | PCI | - | - | - | - | - | - | - | - |
| PDC-2.75 | PCI | - | - | - | 16 mm | - | - | - | - |
| PTRE-1.75 | PCI | - | - | - | - | - | - | - | 4.763 mm |
| SCFE-2.50-SH-THT | PCI | 200.000 mm | - | - | - | - | - | - | - |
| VTR-2.00 | PCI | - | - | - | - | - | - | - | 4.763 mm |
| PTRY-3.00-SS | PCI | 480 mm | - | - | - | - | - | - | - |
| VTRY-3.50 | PCI | - | - | - | - | - | - | - | - |
| FTRY-2.50 | PCI | 150 mm | - | - | - | - | - | - | - |
| FTRY-3.25 | PCI | - | - | - | - | - | - | 165.894 mm | - |
| PTR-2.00 | PCI | 70 mm | - | - | - | 80 mm | - | - | - |
| CIR-4.00-1 | PCI | 60.000 mm | - | - | - | - | - | - | - |
| VTRY-4.50 | PCI | 30.000 mm | - | - | - | - | - | - | - |
| VTR-8.50 | PCI | - | - | - | - | - | - | - | - |
| VTRE-2.50 | PCI | 90.000 mm | - | - | - | - | - | - | - |
| YSH-.437 | PCI | - | - | - | - | - | - | - | - |
| PTR-1.25 | PCI | 35.000 mm | - | - | - | - | - | - | - |
| VTRE-1.50 | PCI | 40 mm | - | - | - | - | - | 13 mm | - |
| PTR-1.50-SS | PCI | 45.000 mm | - | - | - | - | - | - | - |
| PDCY-4.00 | PCI | 170 mm | - | - | - | - | - | - | - |
| PTRE-2.00 | PCI | 380 mm | - | - | - | - | - | - | - |
| PTRE-2.00-R | PCI | 55.000 mm | - | - | - | - | - | - | - |
| CIR-3.00-SS | PCI | 30.000 mm | - | - | - | - | - | - | - |
| VTRE-3.50 | PCI | 85 mm | - | - | - | - | - | - | - |
| PCI VTRE-1.50-SS Roller Bearings | Calculation factor Y:1.5; Fatigue load limit Pu:18.3 kN; Limiting speed:7000 r/min; d1 ≈:70.8 mm; C:24.5 mm; db min.:59 mm; Db min.:87 mm; rb max.:1.5 mm; Ca min.:5 mm; ra max.:1.5 mm; |
| PCI MPTR-76 SPECIAL Roller Bearings | A1:12 mm; Bearing:YAR 207-104-2RFGR/HV; Grub (set) screw G2:5/16-24 UNF; Mass bearing unit:0.77 kg; B:42.9 mm; H:102.5 mm; Basic dynamic load rating C:21.6 kN; Basic static load rating C0:15.3 kN; A:34 mm; A2:30 mm; |
| PCI FTRY-1.75 Ball Bearings | B:120 mm; Limiting speed:2700 r/min; d2 ≈:213 mm; Calculation factor Y0:2; D:360 mm; r1,2 min.:4 mm; b:16.7 mm; ra max.:3 mm; da min.:187 mm; d:170 mm; |
| PCI PTRE-1.75 Cam Follower and Track Roller - Stud Type | S:4.763 mm; Housing:SAW 530; Mass pillow block:92.5 kg; da:131.762 mm; P180°:96.1 kN; Adapter sleeve assembly:SNW 130x5.3/16; RG:3/8 NPT; Da:269.999 mm; Cap bolt:4 x 3/4-10 UNC; A1:158.75 mm; |
| PCI SCCF-3.25-SH Cam Follower and Track Roller - Stud Type | RG:3/8 NPT; Housing:SAF 522; L:419.1 mm; Labyrinth ring:2 x LOR 557; PG:1/4 NPT; ba:42.069 mm; H2:50.8 mm; Pa:12.5 kN; P60°:149 kN; R1:67.866 mm; |
| PCI VTRE-3.50E Cam Follower and Track Roller - Stud Type | da min.:48.4 mm; Mass bearing:0.25 kg; rb max.:0.6 mm; Axial load factor Y:0.6; F:52.5 mm; B:16 mm; D:75 mm; D1 ≈:65.3 mm; s max.:0.9 mm; Basic dynamic load rating C:44.6 kN; |
| PCI FTR-5.00 Cam Follower and Track Roller - Stud Type | B4:34.138 mm; Hydraulic nut:HMVC 40E; Threads per inch:8; G:199.314 mm; Lock washer:W 40; d1:200.025 mm; B1:179.959 mm; Mass adapter sleeve assembly:16 kg; d3 max.:250.165 mm; B:30.429 mm; |
| PCI PTR-1.00 Cam Follower and Track Roller - Stud Type | a:28 mm; d2:85 mm; rs (min):1.5 mm; r1s (min):1.5 mm; T:29 mm; r2s (min):0.6 mm; Pu:25.480 kN; C:22 mm; Static (Coa):215 kN; B:29 mm; |
| PCI SCF-3.25-S Cam Follower and Track Roller - Stud Type | B:41.30 mm; Fillet Radius ra:1.50 mm; Sealed Speed Rating n3:3200 rpm; Accessories:Two Seals; D:130.0000 mm; Basic Static Radial Load Rating Co:137000 N; d:75.000 mm; Basic Dynamic Radial Load Rating C:108000 N; Grease Speed Rating n1:3200 rpm; Oil Speed Rating n2:4300 rpm; |
| PCI VTRY 5.50 Cam Follower and Track Roller - Yoke Type | Limiting speed:3400 r/min; Basic dynamic load rating C:212 kN; J max.:257.175 mm; A:101.6 mm; J1:53.975 mm; L:304.8 mm; H2:47.625 mm; Mass bearing unit:10.9 kg; J min.:231.775 mm; Attachment bolt diameter G:15.875 mm; |
| PCI SCF-3.50-SH Cam Follower and Track Roller - Stud Type | B:15.00 mm; Sealed Speed Rating n3:6300 rpm; Fillet Radius ra:1.00 mm; Basic Dynamic Radial Load Rating C:20800 N; Basic Static Radial Load Rating Co:11600 N; D:68.0000 mm; d:40.000 mm; Oil Speed Rating Open/Shielded n2:12000 rpm; Grease Speed Rating Open/Shielded n1:9500 rpm; Accessories:Two Shields & Snap-R; |
| PCI PDCY-5.00 Cam Follower and Track Roller - Yoke Type | G:M 52x3; d2 max.:137 mm; Basic static load rating C0:360 kN; B:44 mm; Basic dynamic load rating C:245 kN; Material constant KM:330; C1 max.:39 mm; dk:80 mm; l7 min.:73 mm; r1 min.:1 mm; |
| PCI HCCF-3.00-SH Cam Follower and Track Roller - Stud Type | Da max.:70.4 mm; Basic dynamic load rating C:28.6 kN; ra max.:1 mm; db min.:49.6 mm; Fatigue load limit Pu:0.95 kN; Calculation factor f2D:1.09; Number of balls z:17; Calculation factor fHC:1.02; Calculation factor f2B:1.02; d:45 mm; |
| PCI JNLW 1-1/2-12 Roller Bearings | D:90 mm; d1:90 mm; rs (min):1 mm; Oil:3 300 min-1; Grease:2 500 min-1; D1:57 mm; H:25 mm; dynamic Cr:73.560 kN; d:55 mm; static Cor:159.000 kN; |
| PCI VTR-4.50 Cam Follower and Track Roller - Stud Type | a:5.556 mm; S:0.794 mm; Attachment bolt diameter G:4 x 22.225; L:247.65 mm; N1:23.813 mm; A6:31.75 mm; Basic dynamic load rating C:426 kN; J:196.85 mm; A:88.9 mm; Mass bearing unit:30.9 kg; |
| PCI YSH-2.750 Roller Bearings | d:12.000 mm; Oil Speed Rating n2:24000 rpm; Grease Speed Rating Open/Shielded n1:19000 rpm; B:12.00 mm; Basic Dynamic Radial Load Rating C:9750 N; Accessories:Two Shields & Snap-R; Grease Speed Rating n1:19000 rpm; Sealed Speed Rating n3:14000 rpm; D:37.0000 mm; Basic Static Radial Load Rating Co:4150 N; |
(989)358-6148 - Corefain
PCI Load Bearing Roller Assembly solutions can be manufactured with a variety of ... SCF-3.00-SH-THT 3.000 1.75 1.250 2.50 1 1/4 - 12 1.25 ... SCFE-2.50-S.
Cam rollers: 3D models - TraceParts
MPTR-80 PCI METRIC PLAIN STYLE TRACK ROL (1); MPTR-85 (1); MPTR-90 (1) ... SCCF-2.50-SH-THT CAM FOLLOWER STUD (1) ... SCFE 2.50 SH CAM FOLLOWER (1)
PCI SCFE-2.50-SH-THT - Cam Follower and Track Roller ...
Bearing, Cam Follower; 2-1/2" Roller Diameter; 1-1/2" Roller Width; Flat Roller Surface; Stud Type; 1" Stud Diameter; 1-14 Thread; Standard Stud with ...
PCI_LBRA_Cam_Followers_201...
PCI Cam Followers have a black oxide finish on all external surfaces. ... SCF-3.00-SH-THT 3.000 1.75 1.250 2.50 1 1/4 - 12 1.25 ... SCFE-2.50-S.30 pages
load bearing roller assemblies - Kaman Industrial Technologies
load capacity of a PCI Track Roller in the sizing of ... PCI Load Bearing Roller Assembly solutions can be manufactured with a variety ... McG SCFE-2.50-SH.
LOAD BEARING ROLLER ASSEMBLIES
PCI Load Bearing Roller Assembly solutions can be manufactured with a variety ... SCFE-2.00-SH SCFE-2.25-S SCFE-2.25-SH SCFE-2.50-S SCFE-2.50-SH SCFE-2.75-S
PCI SCFE-2.50-SH-THT Roller Bearings | SCFE-2.50-SH-THT Bearing
Brand Name, PCI. Model Number, SCFE-2.50-SH-THT. Min.Order Quantity, 1 pcs. Price, Negotiable. Product Features. PCI SCFE-2.50-SH-THT Roller Bearings Cad ...
PCI SCFE-2.50-SH-THT Roller Bearings
PCI SCFE-2.50-SH-THT Roller Bearings ; Bearing number: LMFM16 ; Tolerance perpendicularity (C):, 15 ; PCD: 38 mm ; L: 70 mm ; Weight: 0,187 Kg.
PCI SCFE-2.50-SH-THT Roller Bearings Video