| No. | Brand | d | J | a | h | F | L | H | S |
| PTR-2.50 | PCI | 65 mm | - | - | - | - | - | - | - |
| PTRY-3.00-SS | PCI | 480 mm | - | - | - | - | - | - | - |
| YSH-.437 | PCI | - | - | - | - | - | - | - | - |
| VTR-8.50 | PCI | - | - | - | - | - | - | - | - |
| SCCF-4.00-SH | PCI | 180 mm | - | - | - | - | - | - | - |
| HPDC-3.00 | PCI | - | - | - | - | - | - | - | - |
| SCF-3.25-SH | PCI | 50.000 mm | - | - | - | - | - | - | - |
| YSH-2.750 | PCI | 12.000 mm | - | - | - | - | - | - | - |
| FTRE-1.50-SS | PCI | 480 mm | - | - | - | - | - | - | - |
| PTR-1.50-SS | PCI | 45.000 mm | - | - | - | - | - | - | - |
| SCFE-2.50-SH-THT | PCI | 200.000 mm | - | - | - | - | - | - | - |
| VTRY 5.50 | PCI | - | - | - | - | - | 304.8 mm | - | - |
| FTR-3.00 | PCI | - | - | - | - | 359 mm | - | - | - |
| VTRE-3.50E | PCI | - | - | - | - | 52.5 mm | - | - | - |
| VTR-1.50-SS | PCI | - | - | - | - | - | - | - | - |
| PTR-3.50 | PCI | - | - | - | - | - | - | 358.775 mm | - |
| PTR-2.00-SS | PCI | 140.000 mm | - | - | - | - | - | - | - |
| VTRE-1.50 | PCI | 40 mm | - | - | - | - | - | 13 mm | - |
| VTRE-4.50 | PCI | - | - | - | - | - | - | - | - |
| VTR-2.00-SS | PCI | 10 mm | - | - | - | 14 mm | - | - | - |
| PDC-2.75 | PCI | - | - | - | 16 mm | - | - | - | - |
| VTR-3.50E | PCI | - | - | - | - | - | - | - | 4.763 mm |
| SCF-4.00-SH | PCI | 60.000 mm | - | - | - | - | - | - | - |
| PTR-5.00 | PCI | 50 mm | - | - | - | - | - | - | - |
| FTRE-2.00 | PCI | 150.000 mm | - | - | - | - | - | - | - |
| VTR-3.50 | PCI | 850 mm | - | - | - | - | - | - | - |
| YSH-1.000-SS | PCI | - | - | 12.779 mm | - | - | - | - | - |
| PTRE-1.75 | PCI | - | - | - | - | - | - | - | 4.763 mm |
| HCCF-3.00-SH | PCI | 45 mm | - | - | - | - | - | - | - |
| PCI PTRY-5.00 Cam Follower and Track Roller - Yoke Type | Cap bolt recommended tightening torque:149.1 N·m; Pa:4.07 kN; J max.:228.6 mm; Labyrinth ring:2 x LER 21; Initial grease fill:107.73 g; L:269.875 mm; Cap bolt:2 x 1/2-13 UNC; A1:69.85 mm; PG:1/8 NPT; A2:115.888 mm; |
| PCI VTRE-3.50 Cam Follower and Track Roller - Stud Type | with tapered bore:1217 ; Static (Cor):50.570 kN; Pu:20.300 kN; d:85 mm; B1:mm; D:150 mm; with cylindrical bore:4 700 min-1; Grease:0.830 kN; Oil:4 000 min-1; rs Dynamic (Cr):2 mm; |
| PCI PTR-2.25 Cam Follower and Track Roller - Stud Type | B:60 mm; Grease:770 kN; D:180 mm; Pu:413 kN; d:120 mm; Static (Cor):5.5 mm; with cylindrical bore:1 600 min-1; Oil:83.150 kN; Dynamic (Cr):3 mm; with tapered bore:2 000 min-1; |
| PCI VTRY-8.50 Cam Follower and Track Roller - Yoke Type | Basic Radial Load Rating-Static SCO:6740 N; Basic Radial Load Rating-Dynamic DC:9800 N; Inside Diameter D:49.2125 mm; Adapter Sleeve AS:SNW11; Speed Rating-Open and Shielded-Grease OSG:6300 rpm; B:21.00 mm; Speed Rating-Open and Shielded-Oil OSO:7500 rpm; D:99.9998 mm; Fillet Radius ra:1.50 mm; Speed Rating-Single and Double Sealed Grease SDG:4300 rpm; |
| PCI PTRY-3.00-SS Ball Bearings | r1,2 min.:6 mm; D:700 mm; D1 ≈:628 mm; Basic static load rating C0:7200 kN; E:654 mm; Db max.:677 mm; Limiting speed:450 r/min; d:480 mm; da min.:503 mm; Basic dynamic load rating C:3740 kN; |
| PCI HCF-3.00-SH Cam Follower and Track Roller - Stud Type | d1:200 mm; Nut for removal:HM 3048; d:220 mm; G2:G 1/4; B2:136 mm; G:Tr 240x4; A:9 mm; Hydraulic nut:HMV 48 E; B1:130 mm; G1:20 mm; |
| PCI VTR-2.00 Cam Follower and Track Roller - Stud Type | PG:1/4 NPT; R2:50.8 mm; da:184.15 mm; Stabilizing ring:SR-0-40; Ca:147.803 mm; S:4.763 mm; ba:103.188 mm; R1:163.512 mm; Cap bolt:4 x 1 1/2-6 UNC; J max.:749.3 mm; |
| PCI CIR-4.00-1 Roller Bearings | Grease Speed Rating n1:3400 rpm; Sealed Speed Rating n3:3400 rpm; D:130.0000 mm; d:60.000 mm; Oil Speed Rating n2:4500 rpm; B:54.00 mm; Basic Dynamic Radial Load Rating C:134000 N; Basic Static Radial Load Rating Co:143000 N; Accessories:Two Shields & Snap-R; Fillet Radius ra:2.00 mm; |
| PCI VTRY-2.50 Cam Follower and Track Roller - Yoke Type | Labyrinth ring (db shaft position):LOR 79; PosiTrac Plus contact element (db shaft position):B10724-79; Lock washer:W 15; J1:47.625 mm; Da:130 mm; da:75 mm; Appropriate attachment bolt size G:0.5 in; P60°:54.7 kN; H:157.559 mm; J min.:219.075 mm; |
| PCI VTR-8.50 Cam Follower and Track Roller - Stud Type | Ca:89.789 mm; Stabilizing ring:2 x 38151-38; Mass pillow block:90.7 kg; P120°:85.9 kN; P180°:94.3 kN; J1:95.25 mm; A1:158.75 mm; Appropriate attachment bolt size G:1 in; Cap bolt:4 x 3/4-10 UNC; Initial grease fill:793.8 g; |
| PCI VTRE-2.50 Cam Follower and Track Roller - Stud Type | Grease Speed Rating Open/Shielded n1:3000 rpm; D:225.0000 mm; Sealed Speed Rating n3:2100 rpm; Basic Static Radial Load Rating Co:150000 N; B:54.00 mm; Fillet Radius ra:3.00 mm; d:90.000 mm; Basic Dynamic Radial Load Rating C:186000 N; Accessories:Snap-Ring; Oil Speed Rating Open/Shielded n2:3600 rpm; |
| PCI VTRY-4.50 Cam Follower and Track Roller - Yoke Type | Sealed Speed Rating n3:6300 rpm; d:30.000 mm; Basic Static Radial Load Rating Co:29000 N; D:72.0000 mm; B:33.30 mm; Accessories:One Seal & Snap-Ring; Oil Speed Rating n2:8500 rpm; Grease Speed Rating n1:6300 rpm; Fillet Radius ra:1.00 mm; Basic Dynamic Radial Load Rating C:41600 N; |
| PCI PTR-2.00-SS Roller Bearings | Fillet Radius ra:2.00 mm; d:140.000 mm; Oil Speed Rating n2:2600 rpm; Basic Static Radial Load Rating Co:310000 N; Fillet Radius rb:1.00 mm; D:220.0000 mm; Basic Dynamic Radial Load Rating C:225000 N; Grease Speed Rating n1:1500 rpm; B:72.00 mm; |
| PCI PTR-3.50 Cam Follower and Track Roller - Stud Type | P90°:207 kN; P180°:133 kN; RG:3/4 NPT; H:358.775 mm; P120°:127 kN; A2:247.65 mm; End plug (suffix Y):EPR 21; R2:37.306 mm; Ca:95.809 mm; Max. speed for PosiTrac Plus seal:800 r/min; |
| PCI VTRE-1.50-SS Roller Bearings | Calculation factor Y:1.5; Fatigue load limit Pu:18.3 kN; Limiting speed:7000 r/min; d1 ≈:70.8 mm; C:24.5 mm; db min.:59 mm; Db min.:87 mm; rb max.:1.5 mm; Ca min.:5 mm; ra max.:1.5 mm; |
| PCI PDCY-4.00 Cam Follower and Track Roller - Yoke Type | d:170 mm; Hydraulic nut:HMV 34 E; Lock nut:KMFE 34; B1:122 mm; d3:220 mm; B:33 mm; Mass adapter sleeve assembly:8.1 kg; G:M 170x3; d1:150 mm; |
PCI FTRE-1.50 FLANGED TRACK ROLLER STUD STYLE ...
The FTRE-1.50 is produced by PCI and is described as a PCI FTRE-1.50 FLANGED TRACK ROLLER STUD STYLE BEARING FLANGED ECCENTRIC 1.50 DIAMETER.
PCI VTRE-1.50 Cam Follower And Track Roller - Stud Type
Brand Name: PCI. Model Number: VTRE-1.50. C0: 6.65 kN. B1: 43.5 mm. Designation of bearing: EX204G2L4. T max.: 100 °C.
VTRE-1.50-HT V-Grooved Track Roller from PCI ProCal, Inc.
19 hours ago — Series, VTRE-HT. Thread Length (FL), 0.500 in 12.700 mm. Bearing Type, Ball - Stainless Steel. Dynamic Load Rating, 560.000 lbf 2492.000 N.Features: V-Grooved Track Rollers provide dual ...Series: VTRE-HTRoller Width (B): 0.751 in; 19.075 mmEccentric Diameter (ED): 0.625 in; 15.88 mm
PCI VTRE-1.50 Cam Follower and Track Roller - Stud Type - Timken ...
PCI VTRE-1.50 Cam Follower and Track Roller - Stud Type ; Ce - Dynamic Radial Rating1: 4980 N ; Contact Angle: 25 º ; da - Inner Ring Backing Diameter: 18.900 mm.
PCI VTRE-1.50 - Cam Follower and Track Roller - Stud Type
1-1/2" Roller Diameter; 25/32" Roller Width; V Groove Roller Surface; Stud Type; 7/16" Stud Diameter; 7/16-20 Thread; Standard Stud with Eccentric Bushing; ...
316 Stainless Steel catalog.pmd - Prairie Bearing & Bolt
e-mail: [email protected] or [email protected]. P.O. Box 115 ... PCI 316. Stainless Steel. Part Number. PCI 316. Stainless Steel ... VTRE-1.50-SS.
PCI Track Rollers & CAM Followers - Yumpu
1/ 2 VCF-8 1/ 2. V-Grooved Eccentric Track Roller. PCI. Part Number. Osborn. McGill. VTRE-1.50. VLRE-1. 1/ 2 N/ A. VTRE-2.00. VLRE-2. N/ A. VTRE-2.50.
vtre-1.50-xht eccentric - v-grooved track roller - pci ...
Browse Item # VTRE-1.50-XHT, V-Grooved Track Roller in the PCI ProCal, Inc. catalog including Item #,UPC Code,Item Name,Description,Features,Line Drawing, ...
PCI VTRE-1.50 Cam Follower and Track Roller - Stud Type Video