| No. | Brand | d | J | a | h | F | L | H | S |
| PTRY-8.00 | PCI | - | - | - | - | - | - | - | - |
| FTR-1.75 | PCI | 17 mm | - | - | - | - | - | - | - |
| HCF-3.00-SH | PCI | 220 mm | - | - | - | - | - | - | - |
| VTRY-8.50 | PCI | - | - | - | - | - | - | - | - |
| VTRE-1.50 | PCI | 40 mm | - | - | - | - | - | 13 mm | - |
| PTR-2.00-SS | PCI | 140.000 mm | - | - | - | - | - | - | - |
| VTR-2.50 | PCI | 340 mm | - | - | - | - | - | - | - |
| FTRY-2.50 | PCI | 150 mm | - | - | - | - | - | - | - |
| CIR-3.00-SS | PCI | 30.000 mm | - | - | - | - | - | - | - |
| VTR-5.50 | PCI | - | - | - | - | - | - | - | - |
| VTR-3.50E | PCI | - | - | - | - | - | - | - | 4.763 mm |
| FTR-2.00 | PCI | 40.000 mm | - | - | - | - | - | - | - |
| VTR-3.50 | PCI | 850 mm | - | - | - | - | - | - | - |
| HPDC-3.00 | PCI | - | - | - | - | - | - | - | - |
| FTRE-1.50 | PCI | 25.000 mm | - | - | - | - | - | - | - |
| PTR-2.25 | PCI | 120 mm | - | - | - | - | - | - | - |
| JNLW 1-1/2-12 | PCI | 55 mm | - | - | - | - | - | 25 mm | - |
| FTR-3.00 | PCI | - | - | - | - | 359 mm | - | - | - |
| FTR-4.00 | PCI | - | - | - | - | - | - | - | - |
| VTRY-5.00 | PCI | - | - | - | - | - | - | - | - |
| YSH-.437 | PCI | - | - | - | - | - | - | - | - |
| PTRY-3.00-SS | PCI | 480 mm | - | - | - | - | - | - | - |
| CIRE-5.00E-1 | PCI | 75.000 mm | - | - | - | - | - | - | - |
| VTRE-3.50 | PCI | 85 mm | - | - | - | - | - | - | - |
| VTRY-2.50 | PCI | - | - | - | - | - | - | 157.559 mm | - |
| SCF-3.50-SH | PCI | 40.000 mm | - | - | - | - | - | - | - |
| PCI VTRY 5.50 Cam Follower and Track Roller - Yoke Type | Limiting speed:3400 r/min; Basic dynamic load rating C:212 kN; J max.:257.175 mm; A:101.6 mm; J1:53.975 mm; L:304.8 mm; H2:47.625 mm; Mass bearing unit:10.9 kg; J min.:231.775 mm; Attachment bolt diameter G:15.875 mm; |
| PCI VTR-1.50-SS Ball Bearings | Reference speed:28000 r/min; Fatigue load limit Pu:0.9 kN; Fw:10 mm; Basic static load rating C0:8 kN; Mass needle roller and cage assembly:0.0023 kg; Limiting speed:32000 r/min; Basic dynamic load rating C:5.94 kN; U:13 mm; Ew:13 mm; |
| PCI PTR-2.50 Cam Follower and Track Roller - Stud Type | Permissible sliding velocity v min.:0 m/s; Tolerance housing:H7; Specific dynamic load factor K:140 N/mm²; Mass bushing:0.1 kg; Specific static load factor K0:200 N/mm²; d:65 mm; Coefficient of friction µ max.:0.08; Coefficient of friction µ min.:0.03; B:50 mm; Permissible sliding velocity v max.:0.5 m/s; |
| PCI HCCF-3.00-SH Cam Follower and Track Roller - Stud Type | Da max.:70.4 mm; Basic dynamic load rating C:28.6 kN; ra max.:1 mm; db min.:49.6 mm; Fatigue load limit Pu:0.95 kN; Calculation factor f2D:1.09; Number of balls z:17; Calculation factor fHC:1.02; Calculation factor f2B:1.02; d:45 mm; |
| PCI PTR-5.00 Cam Follower and Track Roller - Stud Type | D:130 mm; Static (Cor):52.100 kN; Da:116 max; Oil:6 700 min-1; Grease:5 600 min-1; ra:2 max; Pu:2.368 kN; Dynamic (Cr):87.400 kN; da:63 min; d:50 mm; |
| PCI PTRE-2.00 Cam Follower and Track Roller - Stud Type | rb max.:2 mm; d:380 mm; D1 ≈:486 mm; Design variant/feature:NNU.1/C4W33; B:200 mm; Reference speed:800 r/min; da min.:400 mm; Fatigue load limit Pu:585 kN; r3,4 min.:5 mm; Mass bearing:145 kg; |
| PCI VTR-3.50E Cam Follower and Track Roller - Stud Type | Labyrinth ring:2 x LOR 45; R1:53.181 mm; Max. speed for PosiTrac Plus seal:2150 r/min; S:4.763 mm; R2:21.431 mm; P120°:49.8 kN; PG:1/8 NPT; RG:3/8 NPT; Initial grease fill:87.885 g; Cap bolt:2 x 5/8-11 UNC; |
| PCI FTRE-1.50 Cam Follower and Track Roller - Stud Type | B:17.00 mm; Oil Speed Rating n2:14000 rpm; Basic Static Radial Load Rating Co:10800 N; d:25.000 mm; Fillet Radius ra:1.00 mm; Oil Speed Rating Open/Shielded n2:14000 rpm; Sealed Speed Rating n3:7500 rpm; Accessories:Snap-Ring; Basic Dynamic Radial Load Rating C:21200 N; D:62.0000 mm; |
| PCI FTRE-2.00 Cam Follower and Track Roller - Stud Type | Grease Speed Rating Open/Shielded n1:2600 rpm; Basic Dynamic Radial Load Rating C:125000 N; d:150.000 mm; Accessories:Without Accessories; Basic Static Radial Load Rating Co:125000 N; Sealed Speed Rating n3:1700 rpm; Fillet Radius ra:2.00 mm; D:225.0000 mm; Oil Speed Rating Open/Shielded n2:3200 rpm; B:35.00 mm; |
| PCI FTRY-1.75 Ball Bearings | B:120 mm; Limiting speed:2700 r/min; d2 ≈:213 mm; Calculation factor Y0:2; D:360 mm; r1,2 min.:4 mm; b:16.7 mm; ra max.:3 mm; da min.:187 mm; d:170 mm; |
| PCI FTR-1.50 Cam Follower and Track Roller - Stud Type | Dimension series:L 68100; Mass bearing:0.17 kg; Calculation factor Y0:0.8; da max.:41 mm; Da max.:52.5 mm; Da min.:52 mm; rb max.:1.3 mm; T:15.875 mm; B:16.764 mm; Limiting speed:11000 r/min; |
| PCI YSH-1.000-SS Roller Bearings | Ca min.:2 mm; D:62 mm; Cb min.:3 mm; Da max.:55 mm; db min.:33 mm; Fatigue load limit Pu:4.75 kN; Db min.:57 mm; rb max.:1.5 mm; a:12.779 mm; d1 ≈:41.5 mm; |
| PCI VTRY-4.50 Cam Follower and Track Roller - Yoke Type | Sealed Speed Rating n3:6300 rpm; d:30.000 mm; Basic Static Radial Load Rating Co:29000 N; D:72.0000 mm; B:33.30 mm; Accessories:One Seal & Snap-Ring; Oil Speed Rating n2:8500 rpm; Grease Speed Rating n1:6300 rpm; Fillet Radius ra:1.00 mm; Basic Dynamic Radial Load Rating C:41600 N; |
| PCI FTR-3.50 Cam Follower and Track Roller - Stud Type | Basic Dynamic Radial Load Rating C:48800 N; D:190.0000 mm; d:150.000 mm; Accessories:Two Shields; Grease Speed Rating Open/Shielded n1:3000 rpm; Fillet Radius ra:1.00 mm; Oil Speed Rating Open/Shielded n2:3600 rpm; B:20.00 mm; Basic Static Radial Load Rating Co:57000 N; Sealed Speed Rating n3:0 rpm; |
| PCI FTRE-1.50-SS Ball Bearings | A:6.5 mm; G3:12 mm; Mass adapter sleeve assembly:65.8 kg; B5:77 mm; G2:M 8; G:Tr 480x5; d:480 mm; Locking device:MS 30/500-96; B1:200 mm; Hydraulic nut:HMV 96E; |
| PCI CIR-3.00-SS Roller Bearings | d:30.000 mm; Basic Dynamic Radial Load Rating C:30200 N; Basic Static Radial Load Rating Co:28000 N; Sealed Speed Rating n3:7000 rpm; D:62.0000 mm; Grease Speed Rating n1:7000 rpm; Fillet Radius ra:1.00 mm; B:23.80 mm; Accessories:No Shield, no Seal,; Oil Speed Rating n2:9500 rpm; |
PCI MPTR-76 SPECIAL Roller Bearings - NTN 6203lu Bearing
We Provide Extensive PCI MPTR-76 SPECIAL Roller Bearings SUDA BEARING LTD Selection And No Flush Ground Competitive Wholesale Bearing Noun Pricing.
PCI MPTR-76 SPECIAL Roller Bearings | MPTR-76 SPECIAL Bearing
Brand Name, PCI. Model Number, MPTR-76 SPECIAL. Min.Order Quantity, 1 pcs. Price, Negotiable. Product Features. PCI MPTR-76 SPECIAL Roller Bearings Cad ...
pci mptr-76 special - Cam Follower and Track Roller - Stud ...
76MM Roller Diameter; 52MM Roller Width; Flat Roller Surface; Stud Type; 30MM Stud Diameter; M30X3.5 Thread; Standard Stud; Sealed; Taper Roller Bearing ...
PCI Track Rollers & CAM Followers - Houston Bearing and ...
Special Track Rollers. ... Special Cam Followers 31. Page. PCI Track Rollers are ... HPC-72. MPTR-76. HPC-76. MPTR-80. HPC-80. MPTR-85. HPC-85. MPTR-90.
load bearing roller assemblies - Kaman Industrial Technologies
Available in all roller body diameters, PCI manufactures special/custom assemblies in ... HPC-76. Osb MPTR-76. CS72LW. RBC SCCF-2.25-SH. FCF 4. McG FTR-4.00.
PCI MPTR-76 SPECIAL Roller Bearings
PCI MPTR-76 SPECIAL bearing Size Chart (mm/inches). Days to Ship, 6 Days. RoHS, 6. Load Direction, Radial. d, 15. D, 21. B, 12. Number of Raceway Ring Rows ...
PCI_LBRA_Track_Rollers_2015...
MPTR-76. 76. 50. 30. 69.5. M30 X 3.5. 40. 12. 44.5. 1.6. 52. MPTR-80 ... PCI Heavy Duty Yoke Shafts are available at an additional cost.
track rollers — cam followers - Norfolk Bearings and Supply ...
PCI Track Rollers are manufactured with either deep groove ball bearings or tapered roller ... Special Cam Followers ... “MPTR” Series - Track Roller.52 pages
PCI MPTR-76 SPECIAL Roller Bearings Video