| No. | Brand | d | J | a | h | F | L | H | S |
| PTR-1.00 | PCI | - | - | 28 mm | - | - | - | - | - |
| FTRY-1.75 | PCI | 170 mm | - | - | - | - | - | - | - |
| VTR-3.50 | PCI | 850 mm | - | - | - | - | - | - | - |
| PTRY-8.00 | PCI | - | - | - | - | - | - | - | - |
| VTRY 5.50 | PCI | - | - | - | - | - | 304.8 mm | - | - |
| VTR-5.50 | PCI | - | - | - | - | - | - | - | - |
| SCFE-3.00-SH | PCI | 150.000 mm | - | - | - | - | - | - | - |
| FTRE-1.50-SS | PCI | 480 mm | - | - | - | - | - | - | - |
| VTRE-3.50E | PCI | - | - | - | - | 52.5 mm | - | - | - |
| FTR-2.50 | PCI | - | - | - | 32.544 mm | - | - | - | - |
| CTR-1.25-SS | PCI | - | - | - | - | - | 466.725 mm | - | - |
| JNLW 1-1/2-12 | PCI | 55 mm | - | - | - | - | - | 25 mm | - |
| SCF-3.25-SH | PCI | 50.000 mm | - | - | - | - | - | - | - |
| HCF-3.00-SH | PCI | 220 mm | - | - | - | - | - | - | - |
| FTR-3.00 | PCI | - | - | - | - | 359 mm | - | - | - |
| VTR-2.00 | PCI | - | - | - | - | - | - | - | 4.763 mm |
| VTRY-5.00 | PCI | - | - | - | - | - | - | - | - |
| PTR-1.25 | PCI | 35.000 mm | - | - | - | - | - | - | - |
| SCFE-2.50-SH-THT | PCI | 200.000 mm | - | - | - | - | - | - | - |
| PDCY-5.00 | PCI | - | - | - | - | - | - | - | - |
| HPDC-6.00 | PCI | - | - | - | - | - | - | - | - |
| FTRY-7.00 | PCI | - | 70 mm | - | - | - | - | - | - |
| FTR-1.50 | PCI | - | - | - | - | - | - | - | - |
| JNLW 7/16-20 | PCI | 17.000 mm | - | - | - | - | - | - | - |
| 1424HD | PCI | - | - | - | - | - | - | - | - |
| PTR-3.00 | PCI | - | - | - | - | - | - | 323 mm | - |
| PCI FTR-3.00 Cam Follower and Track Roller - Stud Type | B:118 mm; da min.:334 mm; Fatigue load limit Pu:228 kN; r3,4 min.:3 mm; F:359 mm; D1 ≈:399 mm; K:9 mm; Basic static load rating C0:2360 kN; ra max.:2.5 mm; rb max.:2.5 mm; |
| PCI VTR-2.00 Cam Follower and Track Roller - Stud Type | PG:1/4 NPT; R2:50.8 mm; da:184.15 mm; Stabilizing ring:SR-0-40; Ca:147.803 mm; S:4.763 mm; ba:103.188 mm; R1:163.512 mm; Cap bolt:4 x 1 1/2-6 UNC; J max.:749.3 mm; |
| PCI YSH-2.750 Roller Bearings | d:12.000 mm; Oil Speed Rating n2:24000 rpm; Grease Speed Rating Open/Shielded n1:19000 rpm; B:12.00 mm; Basic Dynamic Radial Load Rating C:9750 N; Accessories:Two Shields & Snap-R; Grease Speed Rating n1:19000 rpm; Sealed Speed Rating n3:14000 rpm; D:37.0000 mm; Basic Static Radial Load Rating Co:4150 N; |
| PCI PTR-2.00 Cam Follower and Track Roller - Stud Type | r, r1,2 min.:1 mm; Mass inner ring:0.31 kg; F:80 mm; B:35 mm; d:70 mm; |
| PCI FTR-1.50 Cam Follower and Track Roller - Stud Type | Dimension series:L 68100; Mass bearing:0.17 kg; Calculation factor Y0:0.8; da max.:41 mm; Da max.:52.5 mm; Da min.:52 mm; rb max.:1.3 mm; T:15.875 mm; B:16.764 mm; Limiting speed:11000 r/min; |
| PCI VTRY-8.50 Cam Follower and Track Roller - Yoke Type | Basic Radial Load Rating-Static SCO:6740 N; Basic Radial Load Rating-Dynamic DC:9800 N; Inside Diameter D:49.2125 mm; Adapter Sleeve AS:SNW11; Speed Rating-Open and Shielded-Grease OSG:6300 rpm; B:21.00 mm; Speed Rating-Open and Shielded-Oil OSO:7500 rpm; D:99.9998 mm; Fillet Radius ra:1.50 mm; Speed Rating-Single and Double Sealed Grease SDG:4300 rpm; |
| PCI VTRE-1.50 Cam Follower and Track Roller - Stud Type | static Cor:62.900 kN; Oil:5 600 min-1; Grease:4 200 min-1; rs (min):0.6 mm; D1:42 mm; d:40 mm; H:13 mm; Pu:2.860 kN; d1:60 mm; D:60 mm; |
| PCI FTRY-2.50 Cam Follower and Track Roller - Yoke Type | d1:133.35 mm; Mass adapter sleeve assembly:5 kg; B1:111 mm; B:24 mm; d:150 mm; G:M 150x2; Locking device:MBL 30; Hydraulic nut:HMV 30 E; Lock nut:KML 30; B4:26 mm; |
| PCI FTR-5.00 Cam Follower and Track Roller - Stud Type | B4:34.138 mm; Hydraulic nut:HMVC 40E; Threads per inch:8; G:199.314 mm; Lock washer:W 40; d1:200.025 mm; B1:179.959 mm; Mass adapter sleeve assembly:16 kg; d3 max.:250.165 mm; B:30.429 mm; |
| PCI PTRY-5.00 Cam Follower and Track Roller - Yoke Type | Cap bolt recommended tightening torque:149.1 N·m; Pa:4.07 kN; J max.:228.6 mm; Labyrinth ring:2 x LER 21; Initial grease fill:107.73 g; L:269.875 mm; Cap bolt:2 x 1/2-13 UNC; A1:69.85 mm; PG:1/8 NPT; A2:115.888 mm; |
| PCI FTR-2.50-SS Roller Bearings | Sealed Speed Rating n3:15000 rpm; Basic Dynamic Radial Load Rating C:6890 N; Accessories:Two Shields & Snap-R; B:10.00 mm; Grease Speed Rating Open/Shielded n1:22000 rpm; d:12.000 mm; D:32.0000 mm; Basic Static Radial Load Rating Co:3100 N; Oil Speed Rating Open/Shielded n2:28000 rpm; Oil Speed Rating n2:28000 rpm; |
| PCI HPDC-3.00 Roller Bearings | Db:40.6 mm; C:20 mm; Da:47.5 mm; Reference speed:10000 r/min; Mass bearing:0.14 kg; Basic static load rating C0:57 kN; Limiting speed:11000 r/min; ra max.:0.3 mm; r1,2 min.:0.3 mm; E:47 mm; |
| PCI PTRY-4.00 Cam Follower and Track Roller - Yoke Type | T:36 mm; r1s (min):2.5 mm; rs (min):3 mm; Static (Coa):178 kN; Pu:21.550 kN; D:140 mm; Dynamic (Ca):150 kN; a:44 mm; r2s (min):1 mm; B:33 mm; |
| PCI SCF-3.25-S Cam Follower and Track Roller - Stud Type | B:41.30 mm; Fillet Radius ra:1.50 mm; Sealed Speed Rating n3:3200 rpm; Accessories:Two Seals; D:130.0000 mm; Basic Static Radial Load Rating Co:137000 N; d:75.000 mm; Basic Dynamic Radial Load Rating C:108000 N; Grease Speed Rating n1:3200 rpm; Oil Speed Rating n2:4300 rpm; |
| PCI SCCF-3.25-SH Cam Follower and Track Roller - Stud Type | RG:3/8 NPT; Housing:SAF 522; L:419.1 mm; Labyrinth ring:2 x LOR 557; PG:1/4 NPT; ba:42.069 mm; H2:50.8 mm; Pa:12.5 kN; P60°:149 kN; R1:67.866 mm; |
| PCI CIR-3.00-SS Roller Bearings | d:30.000 mm; Basic Dynamic Radial Load Rating C:30200 N; Basic Static Radial Load Rating Co:28000 N; Sealed Speed Rating n3:7000 rpm; D:62.0000 mm; Grease Speed Rating n1:7000 rpm; Fillet Radius ra:1.00 mm; B:23.80 mm; Accessories:No Shield, no Seal,; Oil Speed Rating n2:9500 rpm; |
Item #: PTR-1.00 Plain Track Roller - PCI ProCal, Inc.
3 days ago — Shoulder Length (SL), 0.03 in 0.762 mm ; Retaining Ring Capacity, 470 lb 2090.56 N ; Maximum Clamping Torque, 180 in·lb 20.34 N·m ; Stud Capacity ...Features: Plain/Cylindrical Track Rollers effecti...Stud Length (D): 1.000 in; 25.400 mmRoller Width (B): 0.751 in; 19.075 mmShoulder Length (SL): 0.03 in; 0.762 mm
316 Stainless Steel catalog.pmd - Prairie Bearing & Bolt
e-mail: [email protected] or [email protected]. P.O. Box 115 ... PTR-1.00-SS ... PCI 316. Stainless Steel. Part Number. PCI 316. Stainless Steel.
PCI PTR-1.00 CAM FOLLOWER BEARING - Automation Recovery
PCI PTR-1.00 CAM FOLLOWER BEARING ... This is a used item sold in Automation Recovery packaging. Your Price: $10.00. You Save $50.00 vs MSRP. Quantity In Stock: 1.
PCI PTR-1.00 Cam Follower and Track Roller - Stud Type - PTR ...
High Quality PCI PTR-1.00 Cam Follower and Track Roller - Stud Type. Competitive Cam Follower and Track Roller - Stud Type Pricing. NTN BEARING CORP.
PCI PTR-1.00 Cam Follower and Track Roller - Stud Type - PTR ...
LET OUR PCI PTR-1.00 Cam Follower and Track Roller - Stud Type EXPERTS 3500 RPM maximum rpm: Lubrication Fitting lubrication type: GET YOU THE PARTS YOU ...
Pci PTR-1.00 Cam Follower Bearing PTR-1.00 - Amazon ...
Brand Name, PCI. Item Weight, 8.0 ounces. Model Number, PTR-1.00. Number of Items, 1. Part Number, PTR-1.00. UNSPSC Code, 31171500 ...
PCI PTR-1.00 CAM FOLLOWER BEARING #150987 | eBay
PCI PTR-1.00 CAM FOLLOWER BEARINGCONDITION MANUFACTURED BY: PCI. Warehouse Pickup – We are able to accommodate pickup at our warehouse.
PCI PTR-1.00 - Cam Follower and Track Roller - Stud ...
1" Roller Diameter; 25/32" Roller Width; Flat Roller Surface; Stud Type; 7/16" Stud Diameter; 7/16-20 Thread; Standard Stud; Sealed; Ball Bearing - Double Row; ...
PCI PTR-1.00 Cam Follower and Track Roller - Stud Type Video