PCI HCCF-3.00-SH Cam Follower and Track Roller - Stud Type

No.	Brand	d	J	a	h	F	L	H	S
CIRE-5.00E-1	PCI	75.000 mm	-	-	-	-	-	-	-
SCF-3.25-SH	PCI	50.000 mm	-	-	-	-	-	-	-
VTRY-2.50	PCI	-	-	-	-	-	-	157.559 mm	-
PTRY-3.00-SS	PCI	480 mm	-	-	-	-	-	-	-
PDC-3.00	PCI	-	-	3 mm	56 mm	-	-	-	-
1424HD	PCI	-	-	-	-	-	-	-	-
VTRY 5.50	PCI	-	-	-	-	-	304.8 mm	-	-
PTR-1.00	PCI	-	-	28 mm	-	-	-	-	-
FTR-3.50	PCI	150.000 mm	-	-	-	-	-	-	-
VTR-2.00-SS	PCI	10 mm	-	-	-	14 mm	-	-	-
PTR-2.25	PCI	120 mm	-	-	-	-	-	-	-
VTRE-3.50	PCI	85 mm	-	-	-	-	-	-	-
FTR-2.00	PCI	40.000 mm	-	-	-	-	-	-	-
SCF-3.00-SH	PCI	130.000 mm	-	-	-	-	-	-	-
VTRE-5.50	PCI	160 mm	-	-	-	-	-	-	-
FTRE-1.50	PCI	25.000 mm	-	-	-	-	-	-	-
PTRE-2.00	PCI	380 mm	-	-	-	-	-	-	-
FFTR-1.50	PCI	5 mm	-	-	-	-	-	-	-
VTRY-8.50	PCI	-	-	-	-	-	-	-	-
PTR-4.00	PCI	-	-	-	-	-	-	-	-

PCI PTR-5.00 Cam Follower and Track Roller - Stud Type	D:130 mm; Static (Cor):52.100 kN; Da:116 max; Oil:6 700 min-1; Grease:5 600 min-1; ra:2 max; Pu:2.368 kN; Dynamic (Cr):87.400 kN; da:63 min; d:50 mm;
PCI PTRE-1.50 Cam Follower and Track Roller - Stud Type	Calculation factor f2B:1.04; Da max.:45 mm; Reference grease quantity Gref:0.63 cm³; D:47 mm; d:30 mm; r3,4 min.:0.2 mm; Db max.:45.6 mm; Basic static load rating C0:4.3 kN; Attainable speed for grease lubrication:26000 r/min; Static axial stiffness, preload class C:109 N/µm;
PCI PTRY-3.50 Cam Follower and Track Roller - Yoke Type	d:75.000 mm; Oil Speed Rating Open/Shielded n2:3600 rpm; Basic Static Radial Load Rating Co:153000 N; B:45.00 mm; Grease Speed Rating Open/Shielded n1:3000 rpm; Basic Dynamic Radial Load Rating C:157000 N; Accessories:Two Shields; Fillet Radius ra:2.50 mm; D:190.0000 mm;
PCI VTR-1.50-SS Ball Bearings	Reference speed:28000 r/min; Fatigue load limit Pu:0.9 kN; Fw:10 mm; Basic static load rating C0:8 kN; Mass needle roller and cage assembly:0.0023 kg; Limiting speed:32000 r/min; Basic dynamic load rating C:5.94 kN; U:13 mm; Ew:13 mm;
PCI HPDC-6.00 Roller Bearings	Thrust factor K:1.76; Calculation factor e:0.33; Basic static load rating C0:20400 kN; D1 ≈:784 mm; Calculation factor Y1:2; r1,2 min.:2 mm; Calculation factor Y2:3; B:365.125 mm; Basic dynamic load rating C:7210 kN; D:812.8 mm;
PCI VTR-2.00 Cam Follower and Track Roller - Stud Type	PG:1/4 NPT; R2:50.8 mm; da:184.15 mm; Stabilizing ring:SR-0-40; Ca:147.803 mm; S:4.763 mm; ba:103.188 mm; R1:163.512 mm; Cap bolt:4 x 1 1/2-6 UNC; J max.:749.3 mm;
PCI CIR-3.00-SS Roller Bearings	d:30.000 mm; Basic Dynamic Radial Load Rating C:30200 N; Basic Static Radial Load Rating Co:28000 N; Sealed Speed Rating n3:7000 rpm; D:62.0000 mm; Grease Speed Rating n1:7000 rpm; Fillet Radius ra:1.00 mm; B:23.80 mm; Accessories:No Shield, no Seal,; Oil Speed Rating n2:9500 rpm;
PCI VTR-3.50E Cam Follower and Track Roller - Stud Type	Labyrinth ring:2 x LOR 45; R1:53.181 mm; Max. speed for PosiTrac Plus seal:2150 r/min; S:4.763 mm; R2:21.431 mm; P120°:49.8 kN; PG:1/8 NPT; RG:3/8 NPT; Initial grease fill:87.885 g; Cap bolt:2 x 5/8-11 UNC;
PCI PTRE-2.00-R Roller Bearings	d:55.000 mm; Accessories:One Seal; B:9.00 mm; Oil Speed Rating Open/Shielded n2:10000 rpm; Grease Speed Rating Open/Shielded n1:8500 rpm; Sealed Speed Rating n3:5180 rpm; Fillet Radius ra:0.30 mm; D:72.0000 mm; Basic Static Radial Load Rating Co:7350 N; Basic Dynamic Radial Load Rating C:8320 N;
PCI SCF-4.00-SH Cam Follower and Track Roller - Stud Type	B:35.00 mm; Accessories:One Seal; Oil Speed Rating Open/Shielded n2:5600 rpm; Sealed Speed Rating n3:3100 rpm; Basic Static Radial Load Rating Co:69500 N; Fillet Radius ra:2.00 mm; D:150.0000 mm; Basic Dynamic Radial Load Rating C:108000 N; Grease Speed Rating Open/Shielded n1:4800 rpm; d:60.000 mm;
PCI SCFE-2.50-SH-THT Roller Bearings	Basic Static Radial Load Rating Co:245000 N; Fillet Radius ra:2.00 mm; Basic Dynamic Radial Load Rating C:216000 N; D:310.0000 mm; Oil Speed Rating Open/Shielded n2:2400 rpm; Grease Speed Rating Open/Shielded n1:1900 rpm; d:200.000 mm; Sealed Speed Rating n3:1300 rpm; Accessories:Without Accessories; B:51.00 mm;
PCI SCF-3.25-S Cam Follower and Track Roller - Stud Type	B:41.30 mm; Fillet Radius ra:1.50 mm; Sealed Speed Rating n3:3200 rpm; Accessories:Two Seals; D:130.0000 mm; Basic Static Radial Load Rating Co:137000 N; d:75.000 mm; Basic Dynamic Radial Load Rating C:108000 N; Grease Speed Rating n1:3200 rpm; Oil Speed Rating n2:4300 rpm;
PCI PTR-2.00 Cam Follower and Track Roller - Stud Type	r, r1,2 min.:1 mm; Mass inner ring:0.31 kg; F:80 mm; B:35 mm; d:70 mm;
PCI PTR-3.50 Cam Follower and Track Roller - Stud Type	P90°:207 kN; P180°:133 kN; RG:3/4 NPT; H:358.775 mm; P120°:127 kN; A2:247.65 mm; End plug (suffix Y):EPR 21; R2:37.306 mm; Ca:95.809 mm; Max. speed for PosiTrac Plus seal:800 r/min;
PCI VTRE-4.50 Cam Follower and Track Roller - Stud Type	da max.:57 mm; Da min.:79 mm; K:8.5 mm; r5 min.:0.6 mm; Calculation factor Y0:0.8; Basic dynamic load rating C:194 kN; Da max.:92 mm; Calculation factor Y2:1.2; Calculation factor Y1:0.81; Basic static load rating C0:204 kN;
PCI PTRY-3.00-SS Ball Bearings	r1,2 min.:6 mm; D:700 mm; D1 ≈:628 mm; Basic static load rating C0:7200 kN; E:654 mm; Db max.:677 mm; Limiting speed:450 r/min; d:480 mm; da min.:503 mm; Basic dynamic load rating C:3740 kN;

PCI HCCF-3.00-SH Cam Follower and Track Roller - Stud Type ...

QuestionPCI HCCF-3.00-SH Cam Follower and Track Roller - Stud Type ? Find 100.0000 mm D what you Two Shields Accessories need faster by entering your Cam ...

PCI HCCF-3.00-SH HCCF-SH Series ...

PCI HCCF-3.00-SH HCCF-SH Series Steel Needle Bearing Cam Follower With Stud PCI HCCF-3.00-SH HCCF-SH Series Steel Needle Bearing Cam Follower With Stud.

pci hccf-3.50-sh cam follower stud style sealed hex bearing ...

The HCCF-3.50-SH is produced by PCI and is described as a PCI HCCF-3.50-SH CAM FOLLOWER STUD STYLE SEALED HEX BEARING CAM FOLLOWER HEAVY STUD CROWNED 3.50 ...

PCI_LBRA_Cam_Followers_201...

PCI Cam Followers have a black oxide finish on all external surfaces. ... SCF-3.00-SH-THT 3.000 1.75 1.250 2.50 1 1/4 - 12 1.25. 3/4 ... HCF-3.00-S.30 pages

PCI HCCF-3.00-SH - Cam Follower and Track Roller - BDI ...

3" Roller Diameter; 1-3/4" Roller Width; Crowned Roller Surface; Stud Type; 1-1/2" Stud Diameter; 1-1/2-12 Thread; Heavy Stud; Sealed; Needle Bearing; ...