| PCI CIR-4.00-1 Roller Bearings | Grease Speed Rating n1:3400 rpm; Sealed Speed Rating n3:3400 rpm; D:130.0000 mm; d:60.000 mm; Oil Speed Rating n2:4500 rpm; B:54.00 mm; Basic Dynamic Radial Load Rating C:134000 N; Basic Static Radial Load Rating Co:143000 N; Accessories:Two Shields & Snap-R; Fillet Radius ra:2.00 mm; |
| PCI VTRE-3.50 Cam Follower and Track Roller - Stud Type | with tapered bore:1217 ; Static (Cor):50.570 kN; Pu:20.300 kN; d:85 mm; B1:mm; D:150 mm; with cylindrical bore:4 700 min-1; Grease:0.830 kN; Oil:4 000 min-1; rs Dynamic (Cr):2 mm; |
| PCI HCF-2.75-SH Cam Follower and Track Roller - Stud Type | r1,2 min.:2.1 mm; D:210 mm; s:63 mm; D2:165 mm; Limiting speed:1400 r/min; ra max.:1 mm; d1 ≈:205 mm; H:74.1 mm; R:160 mm; Da max.:165 mm; |
| PCI PTRY-3.00-SS Ball Bearings | r1,2 min.:6 mm; D:700 mm; D1 ≈:628 mm; Basic static load rating C0:7200 kN; E:654 mm; Db max.:677 mm; Limiting speed:450 r/min; d:480 mm; da min.:503 mm; Basic dynamic load rating C:3740 kN; |
| PCI PDC-3.00 Cam Follower and Track Roller - Stud Type | Permissible sliding velocity v min.:0 m/s; B1:8 mm; Specific static load factor K0:45 N/mm²; Mass bushing:0.73 kg; Specific dynamic load factor K:25 N/mm²; Coefficient of friction µ min.:0.08; a:3 mm; h:56 mm; D1:80 mm; Permissible sliding velocity v max.:0.5 m/s; |
| PCI FTR-5.00 Cam Follower and Track Roller - Stud Type | B4:34.138 mm; Hydraulic nut:HMVC 40E; Threads per inch:8; G:199.314 mm; Lock washer:W 40; d1:200.025 mm; B1:179.959 mm; Mass adapter sleeve assembly:16 kg; d3 max.:250.165 mm; B:30.429 mm; |
| PCI YCF-3.00-S Cam Follower and Track Roller - Yoke Type | Basic Dynamic Radial Load Rating C:23400 N; d:45.000 mm; D:75.0000 mm; Accessories:Two Shields; B:16.00 mm; Grease Speed Rating Open/Shielded n1:9000 rpm; Basic Static Radial Load Rating Co:16600 N; Sealed Speed Rating n3:5600 rpm; Fillet Radius ra:1.00 mm; Oil Speed Rating Open/Shielded n2:11000 rpm; |
| PCI SCF-3.25-S Cam Follower and Track Roller - Stud Type | B:41.30 mm; Fillet Radius ra:1.50 mm; Sealed Speed Rating n3:3200 rpm; Accessories:Two Seals; D:130.0000 mm; Basic Static Radial Load Rating Co:137000 N; d:75.000 mm; Basic Dynamic Radial Load Rating C:108000 N; Grease Speed Rating n1:3200 rpm; Oil Speed Rating n2:4300 rpm; |
| PCI SCF-3.00-SH Cam Follower and Track Roller - Stud Type | B:18.00 mm; Grease Speed Rating Open/Shielded n1:3600 rpm; Basic Dynamic Radial Load Rating C:37700 N; Fillet Radius ra:1.00 mm; Basic Static Radial Load Rating Co:43000 N; Oil Speed Rating Open/Shielded n2:4300 rpm; D:165.0000 mm; Accessories:One Seal; Sealed Speed Rating n3:2200 rpm; d:130.000 mm; |
| PCI FTR-4.00 Cam Follower and Track Roller - Stud Type | B4:16.916 mm; B:15.342 mm; B1:81.128 mm; Lock washer:W 16; G:79.68 mm; Lock nut:AN 16; Threads per inch:12; Hydraulic nut:HMVC 16E; d1:69.85 mm; Mass adapter sleeve assembly:1.45 kg; |
| PCI PTRE-1.50 Cam Follower and Track Roller - Stud Type | Calculation factor f2B:1.04; Da max.:45 mm; Reference grease quantity Gref:0.63 cm³; D:47 mm; d:30 mm; r3,4 min.:0.2 mm; Db max.:45.6 mm; Basic static load rating C0:4.3 kN; Attainable speed for grease lubrication:26000 r/min; Static axial stiffness, preload class C:109 N/µm; |
| PCI PTR-1.50-SS Roller Bearings | Grease Speed Rating n1:5000 rpm; D:85.0000 mm; d:45.000 mm; B:30.20 mm; Accessories:Shield & Seal; Oil Speed Rating n2:6700 rpm; Basic Dynamic Radial Load Rating C:48800 N; Basic Static Radial Load Rating Co:39000 N; Fillet Radius ra:1.00 mm; Sealed Speed Rating n3:5000 rpm; |
| PCI FFTR-1.50 Roller Bearings | da max.:8.4 mm; r1,2 min.:0.3 mm; d:5 mm; D2 ≈:16.5 mm; Basic dynamic load rating C:2.03 kN; Basic static load rating C0:0.88 kN; da min.:7 mm; Reference speed:85000 r/min; Limiting speed:43000 r/min; Calculation factor kr:0.035; |
| PCI PTRE-2.00 Cam Follower and Track Roller - Stud Type | rb max.:2 mm; d:380 mm; D1 ≈:486 mm; Design variant/feature:NNU.1/C4W33; B:200 mm; Reference speed:800 r/min; da min.:400 mm; Fatigue load limit Pu:585 kN; r3,4 min.:5 mm; Mass bearing:145 kg; |
| PCI VTR-2.50 Cam Follower and Track Roller - Stud Type | Dynamic (Cr):12 mm; D:580 mm; d:340 mm; with cylindrical bore:600 min-1; Oil:546.250 kN; rs (min):5 mm; Pu:4020 kN; with tapered bore:750 min-1; B:190 mm; Grease:7080 kN; |
| PCI PTR-5.00 Cam Follower and Track Roller - Stud Type | D:130 mm; Static (Cor):52.100 kN; Da:116 max; Oil:6 700 min-1; Grease:5 600 min-1; ra:2 max; Pu:2.368 kN; Dynamic (Cr):87.400 kN; da:63 min; d:50 mm; |