PCI SCF-3.00-SH Cam Follower and Track Roller - Stud Type

No.	Brand	d	J	a	h	F	L	H	S
FTR-2.50-SS	PCI	12.000 mm	-	-	-	-	-	-	-
FTRE-1.50	PCI	25.000 mm	-	-	-	-	-	-	-
VTRE-3.50E	PCI	-	-	-	-	52.5 mm	-	-	-
PTRY-5.00	PCI	-	-	-	-	-	269.875 mm	-	-
FFTR-1.50	PCI	5 mm	-	-	-	-	-	-	-
FTRY-2.00	PCI	20.000 mm	-	-	-	-	-	-	-
VTRY-8.50	PCI	-	-	-	-	-	-	-	-
VTRY-5.00	PCI	-	-	-	-	-	-	-	-
PTR-1.00	PCI	-	-	28 mm	-	-	-	-	-
SCF-3.00-SH	PCI	130.000 mm	-	-	-	-	-	-	-
CIR-4.00-1	PCI	60.000 mm	-	-	-	-	-	-	-
PTR-1.50	PCI	60.000 mm	-	-	-	-	-	-	-
FTR-2.50	PCI	-	-	-	32.544 mm	-	-	-	-
CIRE-5.00E-1	PCI	75.000 mm	-	-	-	-	-	-	-
VTRY 5.50	PCI	-	-	-	-	-	304.8 mm	-	-
JNLW 1-1/2-12	PCI	55 mm	-	-	-	-	-	25 mm	-
VTR-8.50	PCI	-	-	-	-	-	-	-	-
YSH-1.000-SS	PCI	-	-	12.779 mm	-	-	-	-	-
SCFE-2.50-SH-THT	PCI	200.000 mm	-	-	-	-	-	-	-
JNLW 7/16-20	PCI	17.000 mm	-	-	-	-	-	-	-
VTR-2.50	PCI	340 mm	-	-	-	-	-	-	-
VTR-5.50	PCI	-	-	-	-	-	-	-	-
VTR-2.00	PCI	-	-	-	-	-	-	-	4.763 mm

PCI PTR-1.00 Cam Follower and Track Roller - Stud Type	a:28 mm; d2:85 mm; rs (min):1.5 mm; r1s (min):1.5 mm; T:29 mm; r2s (min):0.6 mm; Pu:25.480 kN; C:22 mm; Static (Coa):215 kN; B:29 mm;
PCI FFTR-1.50 Roller Bearings	da max.:8.4 mm; r1,2 min.:0.3 mm; d:5 mm; D2 ≈:16.5 mm; Basic dynamic load rating C:2.03 kN; Basic static load rating C0:0.88 kN; da min.:7 mm; Reference speed:85000 r/min; Limiting speed:43000 r/min; Calculation factor kr:0.035;
PCI PDC-2.75 Roller Bearings	Coefficient of friction µ min.:0.08; Specific dynamic load factor K:25 N/mm²; Specific static load factor K0:45 N/mm²; Tolerance housing:H7; B:30 mm; h:16 mm; Coefficient of friction µ max.:0.15; Permissible sliding velocity v min.:0 m/s; Permissible sliding velocity v max.:0.5 m/s; D:22 mm;
PCI JNLW 7/16-20 Ball Bearings	Accessories:Synthetic Rubber Sea; Grease Speed Rating Open/Shielded n1:17000 rpm; D:40.0000 mm; Basic Static Radial Load Rating Co:4500 N; Fillet Radius ra:0.64 mm; d:17.000 mm; Basic Dynamic Radial Load Rating C:9560 N; B:17.46 mm; Oil Speed Rating Open/Shielded n2:20000 rpm; Sealed Speed Rating n3:12000 rpm;
PCI MPTR-76 SPECIAL Roller Bearings	A1:12 mm; Bearing:YAR 207-104-2RFGR/HV; Grub (set) screw G2:5/16-24 UNF; Mass bearing unit:0.77 kg; B:42.9 mm; H:102.5 mm; Basic dynamic load rating C:21.6 kN; Basic static load rating C0:15.3 kN; A:34 mm; A2:30 mm;
PCI PTR-2.00-SS Roller Bearings	Fillet Radius ra:2.00 mm; d:140.000 mm; Oil Speed Rating n2:2600 rpm; Basic Static Radial Load Rating Co:310000 N; Fillet Radius rb:1.00 mm; D:220.0000 mm; Basic Dynamic Radial Load Rating C:225000 N; Grease Speed Rating n1:1500 rpm; B:72.00 mm;
PCI CTR-1.25-SS Roller Bearings	L:466.725 mm; P150°:118 kN; PG:1/4 NPT; Eye bolt:2 x 3/8-16 UNC; J1:82.55 mm; RG:1/2 NPT; N1:23.813 mm; Bearing limiting speed:3600 r/min; H2:60.325 mm; Adapter sleeve assembly:SNW 26x4.3/8;
PCI FTRE-2.00 Cam Follower and Track Roller - Stud Type	Grease Speed Rating Open/Shielded n1:2600 rpm; Basic Dynamic Radial Load Rating C:125000 N; d:150.000 mm; Accessories:Without Accessories; Basic Static Radial Load Rating Co:125000 N; Sealed Speed Rating n3:1700 rpm; Fillet Radius ra:2.00 mm; D:225.0000 mm; Oil Speed Rating Open/Shielded n2:3200 rpm; B:35.00 mm;
PCI HCF-6.00-SH Cam Follower and Track Roller - Stud Type	PG:1/8 NPT; A2:231.775 mm; Initial grease fill:232.47 g; Da:190 mm; Cap bolt recommended tightening torque:515.2 N·m; J max.:342.9 mm; End plug (suffix Y):EPR 11; Mass pillow block:44 kg; da:82.55 mm; RG:3/8 NPT;
PCI HPDC-3.00 Roller Bearings	Db:40.6 mm; C:20 mm; Da:47.5 mm; Reference speed:10000 r/min; Mass bearing:0.14 kg; Basic static load rating C0:57 kN; Limiting speed:11000 r/min; ra max.:0.3 mm; r1,2 min.:0.3 mm; E:47 mm;
PCI YCF-3.00-S Cam Follower and Track Roller - Yoke Type	Basic Dynamic Radial Load Rating C:23400 N; d:45.000 mm; D:75.0000 mm; Accessories:Two Shields; B:16.00 mm; Grease Speed Rating Open/Shielded n1:9000 rpm; Basic Static Radial Load Rating Co:16600 N; Sealed Speed Rating n3:5600 rpm; Fillet Radius ra:1.00 mm; Oil Speed Rating Open/Shielded n2:11000 rpm;
PCI SCF-3.25-S Cam Follower and Track Roller - Stud Type	B:41.30 mm; Fillet Radius ra:1.50 mm; Sealed Speed Rating n3:3200 rpm; Accessories:Two Seals; D:130.0000 mm; Basic Static Radial Load Rating Co:137000 N; d:75.000 mm; Basic Dynamic Radial Load Rating C:108000 N; Grease Speed Rating n1:3200 rpm; Oil Speed Rating n2:4300 rpm;
PCI VTRY-5.00 Cam Follower and Track Roller - Yoke Type	Static axial stiffness, preload class B:131 N/µm; ra max.:1 mm; C2:3.8 mm; Number of balls z:26; Attainable speed for oil-air lubrication:26000 r/min; Preload class B GB:560 N; Basic static load rating C0:29 kN; rb max.:0.6 mm; db min.:91 mm; d1:100.83 mm;
PCI FTR-2.00 Cam Follower and Track Roller - Stud Type	D:90.0000 mm; Oil Speed Rating n2:6700 rpm; Basic Static Radial Load Rating Co:65500 N; Sealed Speed Rating n3:5000 rpm; B:36.50 mm; Fillet Radius ra:1.50 mm; Grease Speed Rating n1:5000 rpm; Basic Dynamic Radial Load Rating C:67100 N; d:40.000 mm; Accessories:One Seal & Snap-Ring;
PCI FTRY-7.00 Cam Follower and Track Roller - Yoke Type	T:40 mm; J6:83 mm; s1:21 mm; Basic static load rating C0:7.8 kN; Hexagonal key size for grub screw N:2.5 mm; A1:12 mm; Housing material:Cast iron; RG:1/4-28 UNF; J:70 mm; A5:18 mm;
PCI FTR-4.00 Cam Follower and Track Roller - Stud Type	B4:16.916 mm; B:15.342 mm; B1:81.128 mm; Lock washer:W 16; G:79.68 mm; Lock nut:AN 16; Threads per inch:12; Hydraulic nut:HMVC 16E; d1:69.85 mm; Mass adapter sleeve assembly:1.45 kg;

PCI SCF-3.00-SH - Cam Follower and Track Roller - Stud ...

3" Roller Diameter; 1-3/4" Roller Width; Flat Roller Surface; Stud Type; 1-1/4" Stud Diameter; 1-1/4-12 Thread; Standard Stud; Sealed; Needle Bearing; ...

PCI, ProCal Innovations LLC SCF-3.00-SH | Turtle & Hughes

Questions? Call our product experts at 866.397.8463. PCI, ProCal Innovations LLC SCF-3.00-SH. Share. SCF 3.00 SH CAM FOLLOWER. Price: Request Price.Brand Name: PCI, ProCal Innovations LLCPart #: MOI SCF-3.00-SH

PCI_LBRA_Cam_Followers_201...

BLACK OXIDE FINISH. PCI Cam Followers have a black oxide finish on all external surfaces. ... SCF-3.00-SH-THT 3.000 1.75 1.250 2.50 1 1/4 - 12 1.25. 3/4.30 pages

PCI SCF-3.00-SH CAM FOLLOWER - Automation Recovery

PCI SCF-3.00-SH CAM FOLLOWER, CHROME STEEL, 3" ROLLER DIAMETER, 1-3/4" ROLLER WIDTH. This product is currently out of stock.

PCI Procal Inc. SCF-3.00-SH - Industrial Bearings Inc

Can't find what you're looking for PCI Procal Inc. SCF-3.00-SH ? Our expert Mcgill Bearing Representatives be in contact with Industrial Bearings Inc you ...

PCI SCF-3.00-SH CAM FOLLOWER STUD STYLE SEALED HEX ...

The SCF-3.00-SH is produced by PCI and is described as a PCI SCF-3.00-SH CAM FOLLOWER STUD STYLE SEALED HEX BEARING CAM FOLLOWER 3 DIAMETER.

PCI Procal Inc. SCF-3.00-SH Crowned & Flat Cam Followers

Buy thread size: PCI Procal Inc. SCF-3.00-SH Crowned & Flat Cam Followers from Zhongtian Bearing Co. Ltd，Crowned & Flat Cam Followers Distributor online ...