No. | Brand | d | J | a | h | F | L | H | S |
CIRE-5.00E-1 | PCI | 75.000 mm | - | - | - | - | - | - | - |
JNLW 7/16-20 | PCI | 17.000 mm | - | - | - | - | - | - | - |
HCF-2.75-SH | PCI | - | - | - | - | - | - | 74.1 mm | - |
VTRY-8.50 | PCI | - | - | - | - | - | - | - | - |
VTR-1.50-SS | PCI | - | - | - | - | - | - | - | - |
SCFE-3.00-SH | PCI | 150.000 mm | - | - | - | - | - | - | - |
FTRY-1.75 | PCI | 170 mm | - | - | - | - | - | - | - |
PTRY-5.00 | PCI | - | - | - | - | - | 269.875 mm | - | - |
PTR-1.00 | PCI | - | - | 28 mm | - | - | - | - | - |
PTR-1.50 | PCI | 60.000 mm | - | - | - | - | - | - | - |
PTRY-3.00-SS | PCI | 480 mm | - | - | - | - | - | - | - |
CTR-1.25-SS | PCI | - | - | - | - | - | 466.725 mm | - | - |
CIR-4.00-1 | PCI | 60.000 mm | - | - | - | - | - | - | - |
FFTR-1.50 | PCI | 5 mm | - | - | - | - | - | - | - |
PTRY-8.00 | PCI | - | - | - | - | - | - | - | - |
PTR-2.25 | PCI | 120 mm | - | - | - | - | - | - | - |
VTR-2.00-SS | PCI | 10 mm | - | - | - | 14 mm | - | - | - |
YCF-3.00-S | PCI | 45.000 mm | - | - | - | - | - | - | - |
FTRE-2.00 | PCI | 150.000 mm | - | - | - | - | - | - | - |
HPDC-6.00 | PCI | - | - | - | - | - | - | - | - |
FTRE-1.50-SS | PCI | 480 mm | - | - | - | - | - | - | - |
FTRY-7.00 | PCI | - | 70 mm | - | - | - | - | - | - |
FTRY-2.00 | PCI | 20.000 mm | - | - | - | - | - | - | - |
JNLW 1-1/2-12 | PCI | 55 mm | - | - | - | - | - | 25 mm | - |
PTRY-4.00 | PCI | - | - | 44 mm | - | - | - | - | - |
PDC-3.00 | PCI | - | - | 3 mm | 56 mm | - | - | - | - |
PCI SCF-3.25-SH Cam Follower and Track Roller - Stud Type | Oil Speed Rating n2:6700 rpm; D:110.0000 mm; Basic Static Radial Load Rating Co:14000 N; Grease Speed Rating n1:5600 rpm; Basic Dynamic Radial Load Rating C:43600 N; d:50.000 mm; Fillet Radius ra:2.00 mm; B:27.00 mm; |
PCI HPDC-3.00 Roller Bearings | Db:40.6 mm; C:20 mm; Da:47.5 mm; Reference speed:10000 r/min; Mass bearing:0.14 kg; Basic static load rating C0:57 kN; Limiting speed:11000 r/min; ra max.:0.3 mm; r1,2 min.:0.3 mm; E:47 mm; |
PCI PDC-3.00 Cam Follower and Track Roller - Stud Type | Permissible sliding velocity v min.:0 m/s; B1:8 mm; Specific static load factor K0:45 N/mm²; Mass bushing:0.73 kg; Specific dynamic load factor K:25 N/mm²; Coefficient of friction µ min.:0.08; a:3 mm; h:56 mm; D1:80 mm; Permissible sliding velocity v max.:0.5 m/s; |
PCI PTR-2.00 Cam Follower and Track Roller - Stud Type | r, r1,2 min.:1 mm; Mass inner ring:0.31 kg; F:80 mm; B:35 mm; d:70 mm; |
PCI HPDC-6.00 Roller Bearings | Thrust factor K:1.76; Calculation factor e:0.33; Basic static load rating C0:20400 kN; D1 ≈:784 mm; Calculation factor Y1:2; r1,2 min.:2 mm; Calculation factor Y2:3; B:365.125 mm; Basic dynamic load rating C:7210 kN; D:812.8 mm; |
PCI FTR-5.00 Cam Follower and Track Roller - Stud Type | B4:34.138 mm; Hydraulic nut:HMVC 40E; Threads per inch:8; G:199.314 mm; Lock washer:W 40; d1:200.025 mm; B1:179.959 mm; Mass adapter sleeve assembly:16 kg; d3 max.:250.165 mm; B:30.429 mm; |
PCI VTRY 5.50 Cam Follower and Track Roller - Yoke Type | Limiting speed:3400 r/min; Basic dynamic load rating C:212 kN; J max.:257.175 mm; A:101.6 mm; J1:53.975 mm; L:304.8 mm; H2:47.625 mm; Mass bearing unit:10.9 kg; J min.:231.775 mm; Attachment bolt diameter G:15.875 mm; |
PCI HCF-6.00-SH Cam Follower and Track Roller - Stud Type | PG:1/8 NPT; A2:231.775 mm; Initial grease fill:232.47 g; Da:190 mm; Cap bolt recommended tightening torque:515.2 N·m; J max.:342.9 mm; End plug (suffix Y):EPR 11; Mass pillow block:44 kg; da:82.55 mm; RG:3/8 NPT; |
PCI CTRY-3.00 Roller Bearings | rs (min):5 mm; d:300 mm; Dynamic (Cr):9 mm; D:500 mm; Grease:5160 kN; Static (Cor):16.7 mm; with tapered bore:850 min-1; Pu:3050 kN; Oil:415.160 kN; with cylindrical bore:670 min-1; |
PCI VTRY-8.50 Cam Follower and Track Roller - Yoke Type | Basic Radial Load Rating-Static SCO:6740 N; Basic Radial Load Rating-Dynamic DC:9800 N; Inside Diameter D:49.2125 mm; Adapter Sleeve AS:SNW11; Speed Rating-Open and Shielded-Grease OSG:6300 rpm; B:21.00 mm; Speed Rating-Open and Shielded-Oil OSO:7500 rpm; D:99.9998 mm; Fillet Radius ra:1.50 mm; Speed Rating-Single and Double Sealed Grease SDG:4300 rpm; |
PCI VTR-8.50 Cam Follower and Track Roller - Stud Type | Ca:89.789 mm; Stabilizing ring:2 x 38151-38; Mass pillow block:90.7 kg; P120°:85.9 kN; P180°:94.3 kN; J1:95.25 mm; A1:158.75 mm; Appropriate attachment bolt size G:1 in; Cap bolt:4 x 3/4-10 UNC; Initial grease fill:793.8 g; |
PCI PTR-1.25 Cam Follower and Track Roller - Stud Type | B:27.00 mm; d:35.000 mm; Oil Speed Rating n2:8000 rpm; D:72.0000 mm; Basic Static Radial Load Rating Co:27500 N; Basic Dynamic Radial Load Rating C:37700 N; Fillet Radius ra:1.00 mm; Grease Speed Rating n1:6000 rpm; Accessories:One Seal; Sealed Speed Rating n3:6000 rpm; |
PCI PTR-1.00 Cam Follower and Track Roller - Stud Type | a:28 mm; d2:85 mm; rs (min):1.5 mm; r1s (min):1.5 mm; T:29 mm; r2s (min):0.6 mm; Pu:25.480 kN; C:22 mm; Static (Coa):215 kN; B:29 mm; |
PCI FFTR-1.50 Roller Bearings | da max.:8.4 mm; r1,2 min.:0.3 mm; d:5 mm; D2 ≈:16.5 mm; Basic dynamic load rating C:2.03 kN; Basic static load rating C0:0.88 kN; da min.:7 mm; Reference speed:85000 r/min; Limiting speed:43000 r/min; Calculation factor kr:0.035; |
PCI HCF-3.00-SH Cam Follower and Track Roller - Stud Type | d1:200 mm; Nut for removal:HM 3048; d:220 mm; G2:G 1/4; B2:136 mm; G:Tr 240x4; A:9 mm; Hydraulic nut:HMV 48 E; B1:130 mm; G1:20 mm; |
PCI FTRY-4.00 Cam Follower and Track Roller - Yoke Type | dc:184.15 mm; J1:114.3 mm; A1:190.5 mm; Mass pillow block:208 kg; P180°:160 kN; RG:1 NPT; Initial grease fill:1672.65 g; R2:42.069 mm; A2:339.725 mm; Cap bolt recommended tightening torque:1735.4 N·m; |
PCI VTRE-4.50 Cam Follower And Track Roller - Stud Type - Kkua ...
PCI VTRE-4.50 bearing Size Chart (mm/inches). Bearing number, 031BC07A2. Dimensione (mm), 30.6x72x19. Marchio, NACHI. Diametro del foro (mm), 30,6.
Buy stud length: PCI Procal Inc. VTRE-4.50 V-Groove Cam ...
PCI Procal Inc. Model Number: VTRE-4.50. Product Details. roller diameter::4.5000 in; roller material::Chrome Steel; roller width::2.0000 in ...
Buy point diameter: PCI Procal Inc. VTRE-4.50 V-Groove Cam ...
Buy point diameter: PCI Procal Inc. VTRE-4.50 V-Groove Cam Followers from Egyptian Fabulous Services & Commercial Industries.,V-Groove Cam Followers ...
Stud Type - NTN BEARING CORP.OF AMERICA
PCI VTRE-4.50 Cam Follower and Track Roller - Stud TypeProducts and services ; B5: 97 mm, Da max.: ; B1: 254 mm, Calculation factor Y0: ; Limiting speed: 700 r/min ...
Track Rollers - PCI, ProCal Innovations LLC.
PCI Track Rollers (V-Grooved with Tapered Roller Bearings, Flanged with Ball Bearings ... VTRE-Eccentric Stud · VTRY-Yoke Type. U-Grooved Track Rollers.
PCI, ProCal Innovations LLC VTRE-4.50 | Turtle & Hughes
VTRE-4.50 GROOVED TRACK PCI - PRO CAL V-Groove Cam Follower - 4.5000 in Roller Dia., 2.0000 in Roller Width, 3.0000 in Point Dia., Double PCI_VTRE-TRB ...
PCI VTRE-4.50 - Cam Follower and Track Roller - Stud Type
4-1/2" Roller Diameter; 2" Roller Width; V Groove Roller Surface; Stud Type; 1-1/4" Stud Diameter; 1-1/4-12 Thread; Standard Stud with Eccentric Bushing; Sealed ...
PCI VTRE-4.50 Cam Follower and Track Roller - Stud Type | VTRE ...
PCI VTRE-4.50 Cam Follower and Track Roller - Stud Type ; A: 7.875 in ; Stabilizing Ring 1 Reqd3: SR-38-32 ; Assembly Weight: 370.000 lb ; Diameter S-1, 7 7/8 in.
PCI VTRE-4.50 Cam Follower and Track Roller - Stud Type Video