| PCI PTRY-8.00 Cam Follower and Track Roller - Yoke Type | Basic Interchange BCA:MG207FFH; Basic Interchange NDH:-; Basic Interchange:-; Basic Interchange MCGILL:BB1705; Basic Interchange NSK:-; Accessories:Mast Guide Type- 208; Basic Interchange SPLIT:TB104; Basic Radial Load Rating-Static SCO:48600 lbf; Basic Radial Load Rating-Dynamic DC:11800 lbf; |
| PCI FTRY-4.00 Cam Follower and Track Roller - Yoke Type | dc:184.15 mm; J1:114.3 mm; A1:190.5 mm; Mass pillow block:208 kg; P180°:160 kN; RG:1 NPT; Initial grease fill:1672.65 g; R2:42.069 mm; A2:339.725 mm; Cap bolt recommended tightening torque:1735.4 N·m; |
| PCI HCF-2.75-SH Cam Follower and Track Roller - Stud Type | r1,2 min.:2.1 mm; D:210 mm; s:63 mm; D2:165 mm; Limiting speed:1400 r/min; ra max.:1 mm; d1 ≈:205 mm; H:74.1 mm; R:160 mm; Da max.:165 mm; |
| PCI FTRY-2.50 Cam Follower and Track Roller - Yoke Type | d1:133.35 mm; Mass adapter sleeve assembly:5 kg; B1:111 mm; B:24 mm; d:150 mm; G:M 150x2; Locking device:MBL 30; Hydraulic nut:HMV 30 E; Lock nut:KML 30; B4:26 mm; |
| PCI YSH-2.750 Roller Bearings | d:12.000 mm; Oil Speed Rating n2:24000 rpm; Grease Speed Rating Open/Shielded n1:19000 rpm; B:12.00 mm; Basic Dynamic Radial Load Rating C:9750 N; Accessories:Two Shields & Snap-R; Grease Speed Rating n1:19000 rpm; Sealed Speed Rating n3:14000 rpm; D:37.0000 mm; Basic Static Radial Load Rating Co:4150 N; |
| PCI FTR-2.00 Cam Follower and Track Roller - Stud Type | D:90.0000 mm; Oil Speed Rating n2:6700 rpm; Basic Static Radial Load Rating Co:65500 N; Sealed Speed Rating n3:5000 rpm; B:36.50 mm; Fillet Radius ra:1.50 mm; Grease Speed Rating n1:5000 rpm; Basic Dynamic Radial Load Rating C:67100 N; d:40.000 mm; Accessories:One Seal & Snap-Ring; |
| PCI VTRE-3.50E Cam Follower and Track Roller - Stud Type | da min.:48.4 mm; Mass bearing:0.25 kg; rb max.:0.6 mm; Axial load factor Y:0.6; F:52.5 mm; B:16 mm; D:75 mm; D1 ≈:65.3 mm; s max.:0.9 mm; Basic dynamic load rating C:44.6 kN; |
| PCI PTRY-3.50 Cam Follower and Track Roller - Yoke Type | d:75.000 mm; Oil Speed Rating Open/Shielded n2:3600 rpm; Basic Static Radial Load Rating Co:153000 N; B:45.00 mm; Grease Speed Rating Open/Shielded n1:3000 rpm; Basic Dynamic Radial Load Rating C:157000 N; Accessories:Two Shields; Fillet Radius ra:2.50 mm; D:190.0000 mm; |
| PCI FTR-5.00 Cam Follower and Track Roller - Stud Type | B4:34.138 mm; Hydraulic nut:HMVC 40E; Threads per inch:8; G:199.314 mm; Lock washer:W 40; d1:200.025 mm; B1:179.959 mm; Mass adapter sleeve assembly:16 kg; d3 max.:250.165 mm; B:30.429 mm; |
| PCI VTR-1.50-SS Ball Bearings | Reference speed:28000 r/min; Fatigue load limit Pu:0.9 kN; Fw:10 mm; Basic static load rating C0:8 kN; Mass needle roller and cage assembly:0.0023 kg; Limiting speed:32000 r/min; Basic dynamic load rating C:5.94 kN; U:13 mm; Ew:13 mm; |
| PCI VTR-1.50 Cam Follower and Track Roller - Stud Type | Tolerance housing:H7; Coefficient of friction µ min.:0.03; Specific static load factor K0:200 N/mm²; Mass bushing:0.73 kg; D:145 mm; Coefficient of friction µ max.:0.08; Effective load carrying cross section A:15340 mm²; B:120 mm; Permissible sliding velocity v max.:0.5 m/s; d:130 mm; |
| PCI FTR-2.50 Cam Follower and Track Roller - Stud Type | H2:25.4 mm; P60°:35.1 kN; Bearing:22309 E; P150°:12 kN; End plug (suffix Y):EPR 4; J min.:187.325 mm; da:45 mm; J max.:200.025 mm; Cap bolt recommended tightening torque:149.1 N·m; h:32.544 mm; |
| PCI VTRY-5.00 Cam Follower and Track Roller - Yoke Type | Static axial stiffness, preload class B:131 N/µm; ra max.:1 mm; C2:3.8 mm; Number of balls z:26; Attainable speed for oil-air lubrication:26000 r/min; Preload class B GB:560 N; Basic static load rating C0:29 kN; rb max.:0.6 mm; db min.:91 mm; d1:100.83 mm; |
| PCI PTRE-1.50 Cam Follower and Track Roller - Stud Type | Calculation factor f2B:1.04; Da max.:45 mm; Reference grease quantity Gref:0.63 cm³; D:47 mm; d:30 mm; r3,4 min.:0.2 mm; Db max.:45.6 mm; Basic static load rating C0:4.3 kN; Attainable speed for grease lubrication:26000 r/min; Static axial stiffness, preload class C:109 N/µm; |
| PCI PTR-1.00 Cam Follower and Track Roller - Stud Type | a:28 mm; d2:85 mm; rs (min):1.5 mm; r1s (min):1.5 mm; T:29 mm; r2s (min):0.6 mm; Pu:25.480 kN; C:22 mm; Static (Coa):215 kN; B:29 mm; |
| PCI PTR-3.00 Cam Follower and Track Roller - Stud Type | Locating ring:2 x FRB 5/270; Da:270 mm; N4 max.:12 mm; P90°:730 kN; Appropriate attachment bolt, size G:24 mm; H1:160 mm; End cover:ASNH 530 R; Cap bolt, size:M 24x130; Appropriate attachment bolt, rec. tightening torque:665 N·m; H:323 mm; |