| No. | Brand | d | J | a | h | F | L | H | S |
| PTR-5.00 | PCI | 50 mm | - | - | - | - | - | - | - |
| FTR-2.00 | PCI | 40.000 mm | - | - | - | - | - | - | - |
| VTRE-3.50 | PCI | 85 mm | - | - | - | - | - | - | - |
| HPDC-6.00 | PCI | - | - | - | - | - | - | - | - |
| MPTR-76 SPECIAL | PCI | - | - | - | - | - | - | 102.5 mm | - |
| FTRE-2.00 | PCI | 150.000 mm | - | - | - | - | - | - | - |
| PTR-1.50-SS | PCI | 45.000 mm | - | - | - | - | - | - | - |
| CTR-1.25-SS | PCI | - | - | - | - | - | 466.725 mm | - | - |
| VTRE-1.50-SS | PCI | - | - | - | - | - | - | - | - |
| YCF-3.00-S | PCI | 45.000 mm | - | - | - | - | - | - | - |
| YSH-.437 | PCI | - | - | - | - | - | - | - | - |
| PDC-2.75 | PCI | - | - | - | 16 mm | - | - | - | - |
| FTR-2.50-SS | PCI | 12.000 mm | - | - | - | - | - | - | - |
| VTR-3.50E | PCI | - | - | - | - | - | - | - | 4.763 mm |
| PTR-1.50 | PCI | 60.000 mm | - | - | - | - | - | - | - |
| PTRE-2.00 | PCI | 380 mm | - | - | - | - | - | - | - |
| CIR-3.00-SS | PCI | 30.000 mm | - | - | - | - | - | - | - |
| PTRE-1.75 | PCI | - | - | - | - | - | - | - | 4.763 mm |
| FFTR-1.50 | PCI | 5 mm | - | - | - | - | - | - | - |
| VTR-2.00-SS | PCI | 10 mm | - | - | - | 14 mm | - | - | - |
| HCF-6.00-SH | PCI | - | - | - | - | - | - | - | - |
| VTRE-2.50 | PCI | 90.000 mm | - | - | - | - | - | - | - |
| VTR-2.00 | PCI | - | - | - | - | - | - | - | 4.763 mm |
| VTRE-3.50E | PCI | - | - | - | - | 52.5 mm | - | - | - |
| HCF-4.00-SH | PCI | - | - | - | 79.375 mm | - | - | - | 4.763 mm |
| PCI PDCY-4.00 Cam Follower and Track Roller - Yoke Type | d:170 mm; Hydraulic nut:HMV 34 E; Lock nut:KMFE 34; B1:122 mm; d3:220 mm; B:33 mm; Mass adapter sleeve assembly:8.1 kg; G:M 170x3; d1:150 mm; |
| PCI PTR-1.25 Cam Follower and Track Roller - Stud Type | B:27.00 mm; d:35.000 mm; Oil Speed Rating n2:8000 rpm; D:72.0000 mm; Basic Static Radial Load Rating Co:27500 N; Basic Dynamic Radial Load Rating C:37700 N; Fillet Radius ra:1.00 mm; Grease Speed Rating n1:6000 rpm; Accessories:One Seal; Sealed Speed Rating n3:6000 rpm; |
| PCI PTRE-1.75 Cam Follower and Track Roller - Stud Type | S:4.763 mm; Housing:SAW 530; Mass pillow block:92.5 kg; da:131.762 mm; P180°:96.1 kN; Adapter sleeve assembly:SNW 130x5.3/16; RG:3/8 NPT; Da:269.999 mm; Cap bolt:4 x 3/4-10 UNC; A1:158.75 mm; |
| PCI HCF-2.75-SH Cam Follower and Track Roller - Stud Type | r1,2 min.:2.1 mm; D:210 mm; s:63 mm; D2:165 mm; Limiting speed:1400 r/min; ra max.:1 mm; d1 ≈:205 mm; H:74.1 mm; R:160 mm; Da max.:165 mm; |
| PCI YSH-1.000-SS Roller Bearings | Ca min.:2 mm; D:62 mm; Cb min.:3 mm; Da max.:55 mm; db min.:33 mm; Fatigue load limit Pu:4.75 kN; Db min.:57 mm; rb max.:1.5 mm; a:12.779 mm; d1 ≈:41.5 mm; |
| PCI VTRE-4.50 Cam Follower and Track Roller - Stud Type | da max.:57 mm; Da min.:79 mm; K:8.5 mm; r5 min.:0.6 mm; Calculation factor Y0:0.8; Basic dynamic load rating C:194 kN; Da max.:92 mm; Calculation factor Y2:1.2; Calculation factor Y1:0.81; Basic static load rating C0:204 kN; |
| PCI VTR-3.50 Cam Follower and Track Roller - Stud Type | Locking device:MS 31/850; A:10 mm; G3:13 mm; Lock nut:HM 31/850; d1:800 mm; Mass adapter sleeve assembly:616 kg; B1:536 mm; G:Tr 850x7; d:850 mm; B:118 mm; |
| PCI VTRY-8.50 Cam Follower and Track Roller - Yoke Type | Basic Radial Load Rating-Static SCO:6740 N; Basic Radial Load Rating-Dynamic DC:9800 N; Inside Diameter D:49.2125 mm; Adapter Sleeve AS:SNW11; Speed Rating-Open and Shielded-Grease OSG:6300 rpm; B:21.00 mm; Speed Rating-Open and Shielded-Oil OSO:7500 rpm; D:99.9998 mm; Fillet Radius ra:1.50 mm; Speed Rating-Single and Double Sealed Grease SDG:4300 rpm; |
| PCI FTR-2.00 Cam Follower and Track Roller - Stud Type | D:90.0000 mm; Oil Speed Rating n2:6700 rpm; Basic Static Radial Load Rating Co:65500 N; Sealed Speed Rating n3:5000 rpm; B:36.50 mm; Fillet Radius ra:1.50 mm; Grease Speed Rating n1:5000 rpm; Basic Dynamic Radial Load Rating C:67100 N; d:40.000 mm; Accessories:One Seal & Snap-Ring; |
| PCI FTR-3.00 Cam Follower and Track Roller - Stud Type | B:118 mm; da min.:334 mm; Fatigue load limit Pu:228 kN; r3,4 min.:3 mm; F:359 mm; D1 ≈:399 mm; K:9 mm; Basic static load rating C0:2360 kN; ra max.:2.5 mm; rb max.:2.5 mm; |
| PCI VTR-3.50E Cam Follower and Track Roller - Stud Type | Labyrinth ring:2 x LOR 45; R1:53.181 mm; Max. speed for PosiTrac Plus seal:2150 r/min; S:4.763 mm; R2:21.431 mm; P120°:49.8 kN; PG:1/8 NPT; RG:3/8 NPT; Initial grease fill:87.885 g; Cap bolt:2 x 5/8-11 UNC; |
| PCI SCCF-3.25-SH Cam Follower and Track Roller - Stud Type | RG:3/8 NPT; Housing:SAF 522; L:419.1 mm; Labyrinth ring:2 x LOR 557; PG:1/4 NPT; ba:42.069 mm; H2:50.8 mm; Pa:12.5 kN; P60°:149 kN; R1:67.866 mm; |
| PCI MPTR-76 SPECIAL Roller Bearings | A1:12 mm; Bearing:YAR 207-104-2RFGR/HV; Grub (set) screw G2:5/16-24 UNF; Mass bearing unit:0.77 kg; B:42.9 mm; H:102.5 mm; Basic dynamic load rating C:21.6 kN; Basic static load rating C0:15.3 kN; A:34 mm; A2:30 mm; |
| PCI SCF-3.25-SH Cam Follower and Track Roller - Stud Type | Oil Speed Rating n2:6700 rpm; D:110.0000 mm; Basic Static Radial Load Rating Co:14000 N; Grease Speed Rating n1:5600 rpm; Basic Dynamic Radial Load Rating C:43600 N; d:50.000 mm; Fillet Radius ra:2.00 mm; B:27.00 mm; |
| PCI PTR-4.00 Cam Follower and Track Roller - Stud Type | Calculation factor X:0.35; Calculation factor Y2:0.93; Calculation factor kr:0.09; d1 ≈:314.4 mm; Basic dynamic load rating C:494 kN; Calculation factor A:9.98; ra max.:4 mm; r3,4 min.:2 mm; rb max.:2 mm; |
| PCI PTR-1.00 Cam Follower and Track Roller - Stud Type | a:28 mm; d2:85 mm; rs (min):1.5 mm; r1s (min):1.5 mm; T:29 mm; r2s (min):0.6 mm; Pu:25.480 kN; C:22 mm; Static (Coa):215 kN; B:29 mm; |
FTR-3.50A - PCI/PRO CAL INC.|KamanDirect - Kaman ...
PCI® Flanged Track Roller. Brand: PCI/PRO CAL INC. ... Description. FTR-3.50A (FLANGE TRACK ROLLER - BALL BEARING ALTERNATIVE) ...
PCI FTR-3.50 - Cam Follower and Track Roller - Stud Type ...
3-1/2" Roller Diameter; 2" Roller Width; Flat with Flange Roller Surface; Stud Type; 1-1/4" Stud Diameter; 1-1/4-12 Thread; Standard Stud; Sealed; ...
Pci FTR-3.50 Shaft Cam Follower Idler Roller 3-1/2in Od ...
Pci FTR-3.50 Shaft Cam Follower Idler Roller 3-1/2in Od Bearing D285453. Product ID: S-285453. MFG #: FTR-3.50. Subscribe to PCI MANUFACTURING.
PCI FTR-3.50 Cam Follower And Track Roller - Stud Type - Kkua ...
Buy PCI FTR-3.50 Cam Follower And Track Roller - Stud Type from Kkua Engineering DMCC，PCI Cam Follower And Track Roller - Stud Type Distributor online ...
PCI FTR-3.50 Cam Follower and Track Roller - Stud Type
PCI FTR-3.50 Cam Follower and Track Roller - Stud Type. Enjoy High Margins on 2.5 mm t Competitive Shanghai Ruonan-Power Co., Ltd. PCI Bearing 19 No. of ...
Buy PCI FTR-3.50 Cam Follower and Track Roller - Stud Type - NTN ...
We 38000 r/min Limiting speed Provide 7.2 Calculation factor f0 Extensive PCI FTR-3.50 Cam Follower and Track Roller - Stud Type Selection NTN BEARING CORP.
PCI FTR-3.50 3-1/2" Roller Diameter 2" Roller Width Flat with ...
The FTR-3.50 is produced by PCI and is described as a PCI FTR-3.50 3-1/2" Roller Diameter 2" Roller Width Flat with Flange Roller Surface Stud Type 1-1/4" ...
PCI_LBRA_Track_Rollers_2015...
PTR-3.50. 3.500 1.94 1.250 2.75 1 1/4 - 12 1.75 ... PCI Heavy Duty Yoke Shafts are available at an additional cost. ... FTR Series Track Roller Assembly.
PCI FTR-3.50 Cam Follower and Track Roller - Stud Type Video