| No. | Brand | d | J | a | h | F | L | H | S |
| SCF-3.25-S | PCI | 75.000 mm | - | - | - | - | - | - | - |
| FTRY-7.00 | PCI | - | 70 mm | - | - | - | - | - | - |
| VTRY-3.50 | PCI | - | - | - | - | - | - | - | - |
| SCFE-2.50-SH-THT | PCI | 200.000 mm | - | - | - | - | - | - | - |
| SCF-3.50-SH | PCI | 40.000 mm | - | - | - | - | - | - | - |
| VTR-2.00 | PCI | - | - | - | - | - | - | - | 4.763 mm |
| PTR-3.00 | PCI | - | - | - | - | - | - | 323 mm | - |
| CTRY-3.00 | PCI | 300 mm | - | - | - | - | - | - | - |
| PTR-5.00 | PCI | 50 mm | - | - | - | - | - | - | - |
| PDC-2.75 | PCI | - | - | - | 16 mm | - | - | - | - |
| PTRE-2.00-R | PCI | 55.000 mm | - | - | - | - | - | - | - |
| SCF-3.00-SH | PCI | 130.000 mm | - | - | - | - | - | - | - |
| VTR-1.50-SS | PCI | - | - | - | - | - | - | - | - |
| VTRE-5.50 | PCI | 160 mm | - | - | - | - | - | - | - |
| FTR-3.00 | PCI | - | - | - | - | 359 mm | - | - | - |
| HCF-4.00-SH | PCI | - | - | - | 79.375 mm | - | - | - | 4.763 mm |
| VTR-1.50 | PCI | 130 mm | - | - | - | - | - | - | - |
| VTR-8.50 | PCI | - | - | - | - | - | - | - | - |
| CIR-4.00-1 | PCI | 60.000 mm | - | - | - | - | - | - | - |
| VTR-2.00-SS | PCI | 10 mm | - | - | - | 14 mm | - | - | - |
| HPDC-6.00 | PCI | - | - | - | - | - | - | - | - |
| PTR-2.00-SS | PCI | 140.000 mm | - | - | - | - | - | - | - |
| VTRY 5.50 | PCI | - | - | - | - | - | 304.8 mm | - | - |
| FTRY-2.00 | PCI | 20.000 mm | - | - | - | - | - | - | - |
| VTR-2.50 | PCI | 340 mm | - | - | - | - | - | - | - |
| PTRE-1.50 | PCI | 30 mm | - | - | - | - | - | - | - |
| PDC-3.00 | PCI | - | - | 3 mm | 56 mm | - | - | - | - |
| CTR-1.25-SS | PCI | - | - | - | - | - | 466.725 mm | - | - |
| HPDC-3.00 | PCI | - | - | - | - | - | - | - | - |
| PTR-2.50 | PCI | 65 mm | - | - | - | - | - | - | - |
| PCI SCF-3.25-SH Cam Follower and Track Roller - Stud Type | Oil Speed Rating n2:6700 rpm; D:110.0000 mm; Basic Static Radial Load Rating Co:14000 N; Grease Speed Rating n1:5600 rpm; Basic Dynamic Radial Load Rating C:43600 N; d:50.000 mm; Fillet Radius ra:2.00 mm; B:27.00 mm; |
| PCI HCF-4.00-SH Cam Follower and Track Roller - Stud Type | h:79.375 mm; ba:90.487 mm; da:200.025 mm; Bearing limiting speed:2000 r/min; P150°:236 kN; Stabilizing ring:SR-44-38; Da:399.999 mm; Housing:SSAFS 544; P120°:260 kN; S:4.763 mm; |
| PCI PTR-2.25 Cam Follower and Track Roller - Stud Type | B:60 mm; Grease:770 kN; D:180 mm; Pu:413 kN; d:120 mm; Static (Cor):5.5 mm; with cylindrical bore:1 600 min-1; Oil:83.150 kN; Dynamic (Cr):3 mm; with tapered bore:2 000 min-1; |
| PCI PTR-3.00 Cam Follower and Track Roller - Stud Type | Locating ring:2 x FRB 5/270; Da:270 mm; N4 max.:12 mm; P90°:730 kN; Appropriate attachment bolt, size G:24 mm; H1:160 mm; End cover:ASNH 530 R; Cap bolt, size:M 24x130; Appropriate attachment bolt, rec. tightening torque:665 N·m; H:323 mm; |
| PCI VTRE-1.50-SS Roller Bearings | Calculation factor Y:1.5; Fatigue load limit Pu:18.3 kN; Limiting speed:7000 r/min; d1 ≈:70.8 mm; C:24.5 mm; db min.:59 mm; Db min.:87 mm; rb max.:1.5 mm; Ca min.:5 mm; ra max.:1.5 mm; |
| PCI VTRE-4.50 Cam Follower and Track Roller - Stud Type | da max.:57 mm; Da min.:79 mm; K:8.5 mm; r5 min.:0.6 mm; Calculation factor Y0:0.8; Basic dynamic load rating C:194 kN; Da max.:92 mm; Calculation factor Y2:1.2; Calculation factor Y1:0.81; Basic static load rating C0:204 kN; |
| PCI FTRY-3.25 Cam Follower and Track Roller - Yoke Type | s:32.941 mm; J min.:198.438 mm; Basic dynamic load rating C:212 kN; H:165.894 mm; H2:57.15 mm; Mass bearing unit:9.98 kg; Limiting speed:2800 r/min; Attachment bolt diameter G:19.05 mm; da:68.263 mm; H1:82.55 mm; |
| PCI FTR-4.00 Cam Follower and Track Roller - Stud Type | B4:16.916 mm; B:15.342 mm; B1:81.128 mm; Lock washer:W 16; G:79.68 mm; Lock nut:AN 16; Threads per inch:12; Hydraulic nut:HMVC 16E; d1:69.85 mm; Mass adapter sleeve assembly:1.45 kg; |
| PCI PTRY-4.00 Cam Follower and Track Roller - Yoke Type | T:36 mm; r1s (min):2.5 mm; rs (min):3 mm; Static (Coa):178 kN; Pu:21.550 kN; D:140 mm; Dynamic (Ca):150 kN; a:44 mm; r2s (min):1 mm; B:33 mm; |
| PCI VTR-1.50 Cam Follower and Track Roller - Stud Type | Tolerance housing:H7; Coefficient of friction µ min.:0.03; Specific static load factor K0:200 N/mm²; Mass bushing:0.73 kg; D:145 mm; Coefficient of friction µ max.:0.08; Effective load carrying cross section A:15340 mm²; B:120 mm; Permissible sliding velocity v max.:0.5 m/s; d:130 mm; |
| PCI PTRY-5.00 Cam Follower and Track Roller - Yoke Type | Cap bolt recommended tightening torque:149.1 N·m; Pa:4.07 kN; J max.:228.6 mm; Labyrinth ring:2 x LER 21; Initial grease fill:107.73 g; L:269.875 mm; Cap bolt:2 x 1/2-13 UNC; A1:69.85 mm; PG:1/8 NPT; A2:115.888 mm; |
| PCI FTRE-2.00 Cam Follower and Track Roller - Stud Type | Grease Speed Rating Open/Shielded n1:2600 rpm; Basic Dynamic Radial Load Rating C:125000 N; d:150.000 mm; Accessories:Without Accessories; Basic Static Radial Load Rating Co:125000 N; Sealed Speed Rating n3:1700 rpm; Fillet Radius ra:2.00 mm; D:225.0000 mm; Oil Speed Rating Open/Shielded n2:3200 rpm; B:35.00 mm; |
| PCI YCF-3.00-S Cam Follower and Track Roller - Yoke Type | Basic Dynamic Radial Load Rating C:23400 N; d:45.000 mm; D:75.0000 mm; Accessories:Two Shields; B:16.00 mm; Grease Speed Rating Open/Shielded n1:9000 rpm; Basic Static Radial Load Rating Co:16600 N; Sealed Speed Rating n3:5600 rpm; Fillet Radius ra:1.00 mm; Oil Speed Rating Open/Shielded n2:11000 rpm; |
| PCI VTRE-3.50 Cam Follower and Track Roller - Stud Type | with tapered bore:1217 ; Static (Cor):50.570 kN; Pu:20.300 kN; d:85 mm; B1:mm; D:150 mm; with cylindrical bore:4 700 min-1; Grease:0.830 kN; Oil:4 000 min-1; rs Dynamic (Cr):2 mm; |
| PCI PTR-4.00 Cam Follower and Track Roller - Stud Type | Calculation factor X:0.35; Calculation factor Y2:0.93; Calculation factor kr:0.09; d1 ≈:314.4 mm; Basic dynamic load rating C:494 kN; Calculation factor A:9.98; ra max.:4 mm; r3,4 min.:2 mm; rb max.:2 mm; |
| PCI VTRY-2.50 Cam Follower and Track Roller - Yoke Type | Labyrinth ring (db shaft position):LOR 79; PosiTrac Plus contact element (db shaft position):B10724-79; Lock washer:W 15; J1:47.625 mm; Da:130 mm; da:75 mm; Appropriate attachment bolt size G:0.5 in; P60°:54.7 kN; H:157.559 mm; J min.:219.075 mm; |
PCI VTRE-5.50 Cam Follower and Track Roller - Stud Type | VTRE ...
PCI VTRE-5.50 Cam Follower and Track Roller - Stud Type ; r - Cup Backface To Clear Radius1: 0.050 in ; Design Units: Imperial ; C - Cup Width: 0.4750 in ; Y - ISO ...
PCI VTRE-5.50 - Cam Follower and Track Roller - Stud Type
5-1/2" Roller Diameter; 2" Roller Width; V Groove Roller Surface; Stud Type; 1-1/4" Stud Diameter; 1-1/4-12 Thread; Standard Stud with Eccentric Bushing; Sealed ...
stud diameter: PCI Procal Inc. VTRE-5.50 V-Groove Cam Followers ...
PCI Procal Inc. Model Number: VTRE-5.50. Product Details. roller diameter::5.5000 in; roller material::Chrome Steel; roller width::2.0000 in ...
PCI Procal Inc. VTRE-5.50 V-Groove Cam Followers
Find Punching Retainer Type the Sealmaster BEARING LTD discount PCI Procal Inc. VTRE-5.50 V-Groove Cam Followers online you need . We offer .
Item # VTRE-5.50A-SS, V-Grooved Track Roller On PCI ProCal, Inc.
Browse Item # VTRE-5.50A-SS, V-Grooved Track Roller in the PCI ProCal, Inc. catalog including Item #,UPC Code,Item Name,Description,Features,Thread Type ...
PCI VTRE-5.50 Cam Follower And Track Roller - Stud Type - Kkua ...
PCI VTRE-5.50 Cam Follower And Track Roller - Stud Type ; Ship Weight: 1.73 LB ; Bearing Family: Eccentric Collar Bal ; Anti-Rotation Pin: Yes ; UPC: 782475244096.
technical specifications: PCI Procal Inc. VTRE-5.50 V-Groove Cam ...
Buy technical specifications: PCI Procal Inc. VTRE-5.50 V-Groove Cam Followers from Egyptian Fabulous Services & Commercial Industries.，V-Groove Cam ...
PCI VTRE-5.50 V-Groove Cam Followers - VDJ SERVICE ...
PCI VTRE-5.50 V-Groove Cam Followers with easy-to-use parts graphics, giving you the ability to check parts availability, V-Groove Cam Followers pricing, ...
PCI VTRE-5.50 Cam Follower and Track Roller - Stud Type Video