| No. | Brand | d | J | a | h | F | L | H | S |
| FTR-2.00 | PCI | 40.000 mm | - | - | - | - | - | - | - |
| VTRE-2.50 | PCI | 90.000 mm | - | - | - | - | - | - | - |
| YSH-1.000-SS | PCI | - | - | 12.779 mm | - | - | - | - | - |
| FTRE-1.50-SS | PCI | 480 mm | - | - | - | - | - | - | - |
| JNLW 7/16-20 | PCI | 17.000 mm | - | - | - | - | - | - | - |
| FTR-1.50 | PCI | - | - | - | - | - | - | - | - |
| FTR-3.00 | PCI | - | - | - | - | 359 mm | - | - | - |
| FTRY-2.50 | PCI | 150 mm | - | - | - | - | - | - | - |
| SCF-3.25-SH | PCI | 50.000 mm | - | - | - | - | - | - | - |
| PTR-3.00 | PCI | - | - | - | - | - | - | 323 mm | - |
| PDCY-5.00 | PCI | - | - | - | - | - | - | - | - |
| PDC-3.00 | PCI | - | - | 3 mm | 56 mm | - | - | - | - |
| PTR-5.00 | PCI | 50 mm | - | - | - | - | - | - | - |
| VTRE-3.50 | PCI | 85 mm | - | - | - | - | - | - | - |
| VTR-8.50 | PCI | - | - | - | - | - | - | - | - |
| FTR-2.50-SS | PCI | 12.000 mm | - | - | - | - | - | - | - |
| PTRE-1.75 | PCI | - | - | - | - | - | - | - | 4.763 mm |
| FTR-1.75 | PCI | 17 mm | - | - | - | - | - | - | - |
| JNLW 1-1/2-12 | PCI | 55 mm | - | - | - | - | - | 25 mm | - |
| PTRE-1.50 | PCI | 30 mm | - | - | - | - | - | - | - |
| PTRY-8.00 | PCI | - | - | - | - | - | - | - | - |
| VTR-3.50E | PCI | - | - | - | - | - | - | - | 4.763 mm |
| SCF-3.25-S | PCI | 75.000 mm | - | - | - | - | - | - | - |
| PCI SCF-3.00-SH Cam Follower and Track Roller - Stud Type | B:18.00 mm; Grease Speed Rating Open/Shielded n1:3600 rpm; Basic Dynamic Radial Load Rating C:37700 N; Fillet Radius ra:1.00 mm; Basic Static Radial Load Rating Co:43000 N; Oil Speed Rating Open/Shielded n2:4300 rpm; D:165.0000 mm; Accessories:One Seal; Sealed Speed Rating n3:2200 rpm; d:130.000 mm; |
| PCI CIR-4.00-1 Roller Bearings | Grease Speed Rating n1:3400 rpm; Sealed Speed Rating n3:3400 rpm; D:130.0000 mm; d:60.000 mm; Oil Speed Rating n2:4500 rpm; B:54.00 mm; Basic Dynamic Radial Load Rating C:134000 N; Basic Static Radial Load Rating Co:143000 N; Accessories:Two Shields & Snap-R; Fillet Radius ra:2.00 mm; |
| PCI PTRY-4.00 Cam Follower and Track Roller - Yoke Type | T:36 mm; r1s (min):2.5 mm; rs (min):3 mm; Static (Coa):178 kN; Pu:21.550 kN; D:140 mm; Dynamic (Ca):150 kN; a:44 mm; r2s (min):1 mm; B:33 mm; |
| PCI FTR-1.50 Cam Follower and Track Roller - Stud Type | Dimension series:L 68100; Mass bearing:0.17 kg; Calculation factor Y0:0.8; da max.:41 mm; Da max.:52.5 mm; Da min.:52 mm; rb max.:1.3 mm; T:15.875 mm; B:16.764 mm; Limiting speed:11000 r/min; |
| PCI VTRY-5.00 Cam Follower and Track Roller - Yoke Type | Static axial stiffness, preload class B:131 N/µm; ra max.:1 mm; C2:3.8 mm; Number of balls z:26; Attainable speed for oil-air lubrication:26000 r/min; Preload class B GB:560 N; Basic static load rating C0:29 kN; rb max.:0.6 mm; db min.:91 mm; d1:100.83 mm; |
| PCI PTR-3.50 Cam Follower and Track Roller - Stud Type | P90°:207 kN; P180°:133 kN; RG:3/4 NPT; H:358.775 mm; P120°:127 kN; A2:247.65 mm; End plug (suffix Y):EPR 21; R2:37.306 mm; Ca:95.809 mm; Max. speed for PosiTrac Plus seal:800 r/min; |
| PCI FTR-1.75 Cam Follower and Track Roller - Stud Type | Limiting speed:28000 r/min; Reference speed:45000 r/min; D1 ≈:32.7 mm; Calculation factor kr:0.025; Calculation factor f0:13.1; d1 ≈:24.5 mm; Basic static load rating C0:4.75 kN; Mass bearing:0.065 kg; d:17 mm; B:12 mm; |
| PCI PTRY-5.00 Cam Follower and Track Roller - Yoke Type | Cap bolt recommended tightening torque:149.1 N·m; Pa:4.07 kN; J max.:228.6 mm; Labyrinth ring:2 x LER 21; Initial grease fill:107.73 g; L:269.875 mm; Cap bolt:2 x 1/2-13 UNC; A1:69.85 mm; PG:1/8 NPT; A2:115.888 mm; |
| PCI VTRE-1.50 Cam Follower and Track Roller - Stud Type | static Cor:62.900 kN; Oil:5 600 min-1; Grease:4 200 min-1; rs (min):0.6 mm; D1:42 mm; d:40 mm; H:13 mm; Pu:2.860 kN; d1:60 mm; D:60 mm; |
| PCI HCF-3.00-SH Cam Follower and Track Roller - Stud Type | d1:200 mm; Nut for removal:HM 3048; d:220 mm; G2:G 1/4; B2:136 mm; G:Tr 240x4; A:9 mm; Hydraulic nut:HMV 48 E; B1:130 mm; G1:20 mm; |
| PCI YSH-1.000-SS Roller Bearings | Ca min.:2 mm; D:62 mm; Cb min.:3 mm; Da max.:55 mm; db min.:33 mm; Fatigue load limit Pu:4.75 kN; Db min.:57 mm; rb max.:1.5 mm; a:12.779 mm; d1 ≈:41.5 mm; |
| PCI PDC-3.00 Cam Follower and Track Roller - Stud Type | Permissible sliding velocity v min.:0 m/s; B1:8 mm; Specific static load factor K0:45 N/mm²; Mass bushing:0.73 kg; Specific dynamic load factor K:25 N/mm²; Coefficient of friction µ min.:0.08; a:3 mm; h:56 mm; D1:80 mm; Permissible sliding velocity v max.:0.5 m/s; |
| PCI HCF-4.00-SH Cam Follower and Track Roller - Stud Type | h:79.375 mm; ba:90.487 mm; da:200.025 mm; Bearing limiting speed:2000 r/min; P150°:236 kN; Stabilizing ring:SR-44-38; Da:399.999 mm; Housing:SSAFS 544; P120°:260 kN; S:4.763 mm; |
| PCI FTRE-1.50-SS Ball Bearings | A:6.5 mm; G3:12 mm; Mass adapter sleeve assembly:65.8 kg; B5:77 mm; G2:M 8; G:Tr 480x5; d:480 mm; Locking device:MS 30/500-96; B1:200 mm; Hydraulic nut:HMV 96E; |
| PCI HPDC-6.00 Roller Bearings | Thrust factor K:1.76; Calculation factor e:0.33; Basic static load rating C0:20400 kN; D1 ≈:784 mm; Calculation factor Y1:2; r1,2 min.:2 mm; Calculation factor Y2:3; B:365.125 mm; Basic dynamic load rating C:7210 kN; D:812.8 mm; |
| PCI VTR-2.00-SS Roller Bearings | r, r1,2 min.:0.3 mm; d:10 mm; Mass inner ring:0.0092 kg; F:14 mm; B:16 mm; |
Item # PTR-2.00-HT, Plain Track Roller On PCI ProCal, Inc.
Browse Item # PTR-2.00-HT, Plain Track Roller in the PCI ProCal, Inc. catalog including Item #,UPC Code,Item Name,Description,Features,Hex Size (H),Shoulder ...
PCI Procal Inc. PTRE-2.00 Flat Cam Follower
PCI Procal Inc. PTRE-2.00 Flat Cam Follower - 2.0000 in Roller Dia, 1.6875 in Roller Width, 1.1875 in Stud Dia, 2.0000 in Stud Length, Flat ; Qty:1 ; Ships from.
pci ptre-2.00 plain track roller stud style bearing ... - MRO Supply
The PTRE-2.00 is produced by PCI and is described as a PCI PTRE-2.00 PLAIN TRACK ROLLER STUD STYLE BEARING PLAIN ECCENTRIC 2 DIAMETER.
PCI PTRE-2.00 Cam Follower and Track Roller - Stud Type - PTRE ...
Contact Gary AMERICAN BEARING MFG.CORP. 2.1875 in d for a complete PCI PTRE-2.00 Cam Follower and Track Roller - Stud Type list of clients and projects.
316 Stainless Steel catalog.pmd - Prairie Bearing & Bolt
2 -. PRO CAL INC. Toll Free 800-323-0966 www.pcimfg.com ... PCI 316. Stainless Steel. Part Number ... 1/2-20 .812. 3/16 .031 .030 .605. PTRE-1.375-SS.
NEW PCI PROCAL FLAT CAM FOLLOWER PTR-2.00 | eBay
FLAT CAM FOLLOWER. LOCATION: 4-2. CATALOG#: PTR-2.00.
PCI, ProCal Innovations LLC PTR-2.00 | Turtle & Hughes
PCI, ProCal Innovations LLC PTR-2.00 · Package Qty: 1/EA · Add to Product Group. Add / Remove CPN ...
PCI PTRE-2.00 - Cam Follower and Track Roller - Stud Type
2" Roller Diameter; 1-11/16" Roller Width; Flat Roller Surface; Stud Type; 7/8" Stud Diameter; 7/8-14 Thread; Standard Stud with Eccentric Bushing; Sealed; Ball ...
PCI PTRE-2.00 Cam Follower and Track Roller - Stud Type Video