PCI VTR-1.50 Cam Follower and Track Roller - Stud Type

No.	Brand	d	J	a	h	F	L	H	S
PTRY-4.00	PCI	-	-	44 mm	-	-	-	-	-
VTR-4.50	PCI	-	196.85 mm	5.556 mm	-	-	247.65 mm	-	0.794 mm
CIR-3.00-SS	PCI	30.000 mm	-	-	-	-	-	-	-
VTR-3.50E	PCI	-	-	-	-	-	-	-	4.763 mm
MPTR-76 SPECIAL	PCI	-	-	-	-	-	-	102.5 mm	-
VTR-2.50	PCI	340 mm	-	-	-	-	-	-	-
FTR-2.00	PCI	40.000 mm	-	-	-	-	-	-	-
FTRY-2.00	PCI	20.000 mm	-	-	-	-	-	-	-
VTR-2.00-SS	PCI	10 mm	-	-	-	14 mm	-	-	-
VTRE-3.50E	PCI	-	-	-	-	52.5 mm	-	-	-
SCCF-4.00-SH	PCI	180 mm	-	-	-	-	-	-	-
PTR-2.00	PCI	70 mm	-	-	-	80 mm	-	-	-
HCF-3.00-SH	PCI	220 mm	-	-	-	-	-	-	-
SCF-4.00-SH	PCI	60.000 mm	-	-	-	-	-	-	-
FTR-1.50	PCI	-	-	-	-	-	-	-	-
JNLW 7/16-20	PCI	17.000 mm	-	-	-	-	-	-	-
VTR-1.50-SS	PCI	-	-	-	-	-	-	-	-
SCFE-3.00-SH	PCI	150.000 mm	-	-	-	-	-	-	-
HCF-2.75-SH	PCI	-	-	-	-	-	-	74.1 mm	-
VTR-2.00	PCI	-	-	-	-	-	-	-	4.763 mm
PTRY-8.00	PCI	-	-	-	-	-	-	-	-
PTR-1.50-SS	PCI	45.000 mm	-	-	-	-	-	-	-
FTRY-1.75	PCI	170 mm	-	-	-	-	-	-	-
FTRE-2.00	PCI	150.000 mm	-	-	-	-	-	-	-
VTR-1.50	PCI	130 mm	-	-	-	-	-	-	-
FTR-2.50	PCI	-	-	-	32.544 mm	-	-	-	-
SCFE-2.50-SH-THT	PCI	200.000 mm	-	-	-	-	-	-	-
VTRY-4.50	PCI	30.000 mm	-	-	-	-	-	-	-

PCI YSH-2.750 Roller Bearings	d:12.000 mm; Oil Speed Rating n2:24000 rpm; Grease Speed Rating Open/Shielded n1:19000 rpm; B:12.00 mm; Basic Dynamic Radial Load Rating C:9750 N; Accessories:Two Shields & Snap-R; Grease Speed Rating n1:19000 rpm; Sealed Speed Rating n3:14000 rpm; D:37.0000 mm; Basic Static Radial Load Rating Co:4150 N;
PCI PTRY-3.50 Cam Follower and Track Roller - Yoke Type	d:75.000 mm; Oil Speed Rating Open/Shielded n2:3600 rpm; Basic Static Radial Load Rating Co:153000 N; B:45.00 mm; Grease Speed Rating Open/Shielded n1:3000 rpm; Basic Dynamic Radial Load Rating C:157000 N; Accessories:Two Shields; Fillet Radius ra:2.50 mm; D:190.0000 mm;
PCI PTR-2.00 Cam Follower and Track Roller - Stud Type	r, r1,2 min.:1 mm; Mass inner ring:0.31 kg; F:80 mm; B:35 mm; d:70 mm;
PCI PTRY-5.00 Cam Follower and Track Roller - Yoke Type	Cap bolt recommended tightening torque:149.1 N·m; Pa:4.07 kN; J max.:228.6 mm; Labyrinth ring:2 x LER 21; Initial grease fill:107.73 g; L:269.875 mm; Cap bolt:2 x 1/2-13 UNC; A1:69.85 mm; PG:1/8 NPT; A2:115.888 mm;
PCI FTR-2.50-SS Roller Bearings	Sealed Speed Rating n3:15000 rpm; Basic Dynamic Radial Load Rating C:6890 N; Accessories:Two Shields & Snap-R; B:10.00 mm; Grease Speed Rating Open/Shielded n1:22000 rpm; d:12.000 mm; D:32.0000 mm; Basic Static Radial Load Rating Co:3100 N; Oil Speed Rating Open/Shielded n2:28000 rpm; Oil Speed Rating n2:28000 rpm;
PCI YSH-1.000-SS Roller Bearings	Ca min.:2 mm; D:62 mm; Cb min.:3 mm; Da max.:55 mm; db min.:33 mm; Fatigue load limit Pu:4.75 kN; Db min.:57 mm; rb max.:1.5 mm; a:12.779 mm; d1 ≈:41.5 mm;
PCI VTRY-5.00 Cam Follower and Track Roller - Yoke Type	Static axial stiffness, preload class B:131 N/µm; ra max.:1 mm; C2:3.8 mm; Number of balls z:26; Attainable speed for oil-air lubrication:26000 r/min; Preload class B GB:560 N; Basic static load rating C0:29 kN; rb max.:0.6 mm; db min.:91 mm; d1:100.83 mm;
PCI VTRY-2.50 Cam Follower and Track Roller - Yoke Type	Labyrinth ring (db shaft position):LOR 79; PosiTrac Plus contact element (db shaft position):B10724-79; Lock washer:W 15; J1:47.625 mm; Da:130 mm; da:75 mm; Appropriate attachment bolt size G:0.5 in; P60°:54.7 kN; H:157.559 mm; J min.:219.075 mm;
PCI HCF-6.00-SH Cam Follower and Track Roller - Stud Type	PG:1/8 NPT; A2:231.775 mm; Initial grease fill:232.47 g; Da:190 mm; Cap bolt recommended tightening torque:515.2 N·m; J max.:342.9 mm; End plug (suffix Y):EPR 11; Mass pillow block:44 kg; da:82.55 mm; RG:3/8 NPT;
PCI PTR-4.00 Cam Follower and Track Roller - Stud Type	Calculation factor X:0.35; Calculation factor Y2:0.93; Calculation factor kr:0.09; d1 ≈:314.4 mm; Basic dynamic load rating C:494 kN; Calculation factor A:9.98; ra max.:4 mm; r3,4 min.:2 mm; rb max.:2 mm;
PCI FTRY-1.75 Ball Bearings	B:120 mm; Limiting speed:2700 r/min; d2 ≈:213 mm; Calculation factor Y0:2; D:360 mm; r1,2 min.:4 mm; b:16.7 mm; ra max.:3 mm; da min.:187 mm; d:170 mm;
PCI VTR-3.50 Cam Follower and Track Roller - Stud Type	Locking device:MS 31/850; A:10 mm; G3:13 mm; Lock nut:HM 31/850; d1:800 mm; Mass adapter sleeve assembly:616 kg; B1:536 mm; G:Tr 850x7; d:850 mm; B:118 mm;
PCI FTRE-1.50-SS Ball Bearings	A:6.5 mm; G3:12 mm; Mass adapter sleeve assembly:65.8 kg; B5:77 mm; G2:M 8; G:Tr 480x5; d:480 mm; Locking device:MS 30/500-96; B1:200 mm; Hydraulic nut:HMV 96E;
PCI FTR-1.50 Cam Follower and Track Roller - Stud Type	Dimension series:L 68100; Mass bearing:0.17 kg; Calculation factor Y0:0.8; da max.:41 mm; Da max.:52.5 mm; Da min.:52 mm; rb max.:1.3 mm; T:15.875 mm; B:16.764 mm; Limiting speed:11000 r/min;
PCI VTRE-1.50 Cam Follower and Track Roller - Stud Type	static Cor:62.900 kN; Oil:5 600 min-1; Grease:4 200 min-1; rs (min):0.6 mm; D1:42 mm; d:40 mm; H:13 mm; Pu:2.860 kN; d1:60 mm; D:60 mm;
PCI PDC-3.00 Cam Follower and Track Roller - Stud Type	Permissible sliding velocity v min.:0 m/s; B1:8 mm; Specific static load factor K0:45 N/mm²; Mass bushing:0.73 kg; Specific dynamic load factor K:25 N/mm²; Coefficient of friction µ min.:0.08; a:3 mm; h:56 mm; D1:80 mm; Permissible sliding velocity v max.:0.5 m/s;

PCI VTR-1.50 - Cam Follower and Track Roller - Stud ...

1-1/2" Roller Diameter; 25/32" Roller Width; V Groove Roller Surface; Stud Type; 7/16" Stud Diameter; 7/16-20 Thread; Standard Stud; Sealed; Ball Bearing ...

VTR-1.50, PCI Procal Inc. VTR-1.50 V-Groove Cam Followers on ...

VTR-1.50, PCI Procal Inc. VTR-1.50 V-Groove Cam Followers - provide cheap and quality auto parts of Friction Bearing - 20514955.

Item # VTR-1.50, V-Grooved Track Roller On PCI ProCal, Inc.

Browse Item # VTR-1.50, V-Grooved Track Roller in the PCI ProCal, Inc. catalog including Item #,UPC Code,Item Name,Description,Features,Line Drawing,,Hex ...

Buy thread size: PCI Procal Inc. VTR-1.50 V-Groove Cam Followers ...

Buy thread size: PCI Procal Inc. VTR-1.50 V-Groove Cam Followers from Yantai OM Bearing Sales Co.,Ltd，V-Groove Cam Followers Distributor online Service ...