| PCI SCFE-3.00-SH Cam Follower and Track Roller - Stud Type | Basic Static Radial Load Rating Co:950000 N; Fillet Radius ra:3.00 mm; Grease Speed Rating n1:2000 rpm; B:130.00 mm; d:150.000 mm; Fillet Radius rb:1.00 mm; Oil Speed Rating n2:2900 rpm; D:320.0000 mm; Basic Dynamic Radial Load Rating C:624000 N; |
| PCI PTR-3.50 Cam Follower and Track Roller - Stud Type | P90°:207 kN; P180°:133 kN; RG:3/4 NPT; H:358.775 mm; P120°:127 kN; A2:247.65 mm; End plug (suffix Y):EPR 21; R2:37.306 mm; Ca:95.809 mm; Max. speed for PosiTrac Plus seal:800 r/min; |
| PCI PTR-1.50 Cam Follower and Track Roller - Stud Type | d:60.000 mm; Grease Speed Rating n1:5400 rpm; Fillet Radius rb:1.00 mm; Oil Speed Rating n2:7000 rpm; D:110.0000 mm; Basic Static Radial Load Rating Co:44000 N; B:22.00 mm; Fillet Radius ra:1.50 mm; Basic Dynamic Radial Load Rating C:52700 N; |
| PCI VTR-3.50 Cam Follower and Track Roller - Stud Type | Locking device:MS 31/850; A:10 mm; G3:13 mm; Lock nut:HM 31/850; d1:800 mm; Mass adapter sleeve assembly:616 kg; B1:536 mm; G:Tr 850x7; d:850 mm; B:118 mm; |
| PCI PTRE-1.50 Cam Follower and Track Roller - Stud Type | Calculation factor f2B:1.04; Da max.:45 mm; Reference grease quantity Gref:0.63 cm³; D:47 mm; d:30 mm; r3,4 min.:0.2 mm; Db max.:45.6 mm; Basic static load rating C0:4.3 kN; Attainable speed for grease lubrication:26000 r/min; Static axial stiffness, preload class C:109 N/µm; |
| PCI FTRY-4.00 Cam Follower and Track Roller - Yoke Type | dc:184.15 mm; J1:114.3 mm; A1:190.5 mm; Mass pillow block:208 kg; P180°:160 kN; RG:1 NPT; Initial grease fill:1672.65 g; R2:42.069 mm; A2:339.725 mm; Cap bolt recommended tightening torque:1735.4 N·m; |
| PCI FTR-2.00 Cam Follower and Track Roller - Stud Type | D:90.0000 mm; Oil Speed Rating n2:6700 rpm; Basic Static Radial Load Rating Co:65500 N; Sealed Speed Rating n3:5000 rpm; B:36.50 mm; Fillet Radius ra:1.50 mm; Grease Speed Rating n1:5000 rpm; Basic Dynamic Radial Load Rating C:67100 N; d:40.000 mm; Accessories:One Seal & Snap-Ring; |
| PCI HCF-2.75-SH Cam Follower and Track Roller - Stud Type | r1,2 min.:2.1 mm; D:210 mm; s:63 mm; D2:165 mm; Limiting speed:1400 r/min; ra max.:1 mm; d1 ≈:205 mm; H:74.1 mm; R:160 mm; Da max.:165 mm; |
| PCI PDCY-5.00 Cam Follower and Track Roller - Yoke Type | G:M 52x3; d2 max.:137 mm; Basic static load rating C0:360 kN; B:44 mm; Basic dynamic load rating C:245 kN; Material constant KM:330; C1 max.:39 mm; dk:80 mm; l7 min.:73 mm; r1 min.:1 mm; |
| PCI YSH-2.750 Roller Bearings | d:12.000 mm; Oil Speed Rating n2:24000 rpm; Grease Speed Rating Open/Shielded n1:19000 rpm; B:12.00 mm; Basic Dynamic Radial Load Rating C:9750 N; Accessories:Two Shields & Snap-R; Grease Speed Rating n1:19000 rpm; Sealed Speed Rating n3:14000 rpm; D:37.0000 mm; Basic Static Radial Load Rating Co:4150 N; |
| PCI FTR-4.00 Cam Follower and Track Roller - Stud Type | B4:16.916 mm; B:15.342 mm; B1:81.128 mm; Lock washer:W 16; G:79.68 mm; Lock nut:AN 16; Threads per inch:12; Hydraulic nut:HMVC 16E; d1:69.85 mm; Mass adapter sleeve assembly:1.45 kg; |
| PCI CIRE-5.00E-1 Roller Bearings | Basic Static Radial Load Rating Co:137000 N; Accessories:No Shield, no Seal; B:41.30 mm; Grease Speed Rating n1:3200 rpm; Basic Dynamic Radial Load Rating C:108000 N; Fillet Radius ra:1.50 mm; d:75.000 mm; Sealed Speed Rating n3:3200 rpm; D:130.0000 mm; Oil Speed Rating n2:4300 rpm; |
| PCI VTRE-3.50E Cam Follower and Track Roller - Stud Type | da min.:48.4 mm; Mass bearing:0.25 kg; rb max.:0.6 mm; Axial load factor Y:0.6; F:52.5 mm; B:16 mm; D:75 mm; D1 ≈:65.3 mm; s max.:0.9 mm; Basic dynamic load rating C:44.6 kN; |
| PCI PTR-2.00 Cam Follower and Track Roller - Stud Type | r, r1,2 min.:1 mm; Mass inner ring:0.31 kg; F:80 mm; B:35 mm; d:70 mm; |
| PCI PTRY-8.00 Cam Follower and Track Roller - Yoke Type | Basic Interchange BCA:MG207FFH; Basic Interchange NDH:-; Basic Interchange:-; Basic Interchange MCGILL:BB1705; Basic Interchange NSK:-; Accessories:Mast Guide Type- 208; Basic Interchange SPLIT:TB104; Basic Radial Load Rating-Static SCO:48600 lbf; Basic Radial Load Rating-Dynamic DC:11800 lbf; |
| PCI VTR-8.50 Cam Follower and Track Roller - Stud Type | Ca:89.789 mm; Stabilizing ring:2 x 38151-38; Mass pillow block:90.7 kg; P120°:85.9 kN; P180°:94.3 kN; J1:95.25 mm; A1:158.75 mm; Appropriate attachment bolt size G:1 in; Cap bolt:4 x 3/4-10 UNC; Initial grease fill:793.8 g; |