PCI VTR-2.00 Cam Follower and Track Roller - Stud Type

No.	Brand	d	J	a	h	F	L	H	S
PTR-2.50	PCI	65 mm	-	-	-	-	-	-	-
PTRY-3.50	PCI	75.000 mm	-	-	-	-	-	-	-
PTR-4.00	PCI	-	-	-	-	-	-	-	-
VTR-5.50	PCI	-	-	-	-	-	-	-	-
SCCF-3.25-SH	PCI	-	-	-	-	-	419.1 mm	-	-
SCF-3.00-SH	PCI	130.000 mm	-	-	-	-	-	-	-
VTR-1.50	PCI	130 mm	-	-	-	-	-	-	-
PTRE-1.75	PCI	-	-	-	-	-	-	-	4.763 mm
PTRY-8.00	PCI	-	-	-	-	-	-	-	-
SCF-3.50-SH	PCI	40.000 mm	-	-	-	-	-	-	-
VTRE-3.50	PCI	85 mm	-	-	-	-	-	-	-
FTR-2.00	PCI	40.000 mm	-	-	-	-	-	-	-
PTR-1.25	PCI	35.000 mm	-	-	-	-	-	-	-
PDCY-4.00	PCI	170 mm	-	-	-	-	-	-	-
VTRY-4.50	PCI	30.000 mm	-	-	-	-	-	-	-
FTRY-7.00	PCI	-	70 mm	-	-	-	-	-	-
JNLW 7/16-20	PCI	17.000 mm	-	-	-	-	-	-	-
CTRY-3.00	PCI	300 mm	-	-	-	-	-	-	-
PTR-3.00	PCI	-	-	-	-	-	-	323 mm	-
YSH-1.000-SS	PCI	-	-	12.779 mm	-	-	-	-	-
VTR-3.50E	PCI	-	-	-	-	-	-	-	4.763 mm
SCF-3.25-S	PCI	75.000 mm	-	-	-	-	-	-	-
VTR-2.00	PCI	-	-	-	-	-	-	-	4.763 mm

PCI PTRY-5.00 Cam Follower and Track Roller - Yoke Type	Cap bolt recommended tightening torque:149.1 N·m; Pa:4.07 kN; J max.:228.6 mm; Labyrinth ring:2 x LER 21; Initial grease fill:107.73 g; L:269.875 mm; Cap bolt:2 x 1/2-13 UNC; A1:69.85 mm; PG:1/8 NPT; A2:115.888 mm;
PCI HCF-4.00-SH Cam Follower and Track Roller - Stud Type	h:79.375 mm; ba:90.487 mm; da:200.025 mm; Bearing limiting speed:2000 r/min; P150°:236 kN; Stabilizing ring:SR-44-38; Da:399.999 mm; Housing:SSAFS 544; P120°:260 kN; S:4.763 mm;
PCI VTRE-4.50 Cam Follower and Track Roller - Stud Type	da max.:57 mm; Da min.:79 mm; K:8.5 mm; r5 min.:0.6 mm; Calculation factor Y0:0.8; Basic dynamic load rating C:194 kN; Da max.:92 mm; Calculation factor Y2:1.2; Calculation factor Y1:0.81; Basic static load rating C0:204 kN;
PCI SCFE-3.00-SH Cam Follower and Track Roller - Stud Type	Basic Static Radial Load Rating Co:950000 N; Fillet Radius ra:3.00 mm; Grease Speed Rating n1:2000 rpm; B:130.00 mm; d:150.000 mm; Fillet Radius rb:1.00 mm; Oil Speed Rating n2:2900 rpm; D:320.0000 mm; Basic Dynamic Radial Load Rating C:624000 N;
PCI PTRY-3.50 Cam Follower and Track Roller - Yoke Type	d:75.000 mm; Oil Speed Rating Open/Shielded n2:3600 rpm; Basic Static Radial Load Rating Co:153000 N; B:45.00 mm; Grease Speed Rating Open/Shielded n1:3000 rpm; Basic Dynamic Radial Load Rating C:157000 N; Accessories:Two Shields; Fillet Radius ra:2.50 mm; D:190.0000 mm;
PCI FTRY-4.00 Cam Follower and Track Roller - Yoke Type	dc:184.15 mm; J1:114.3 mm; A1:190.5 mm; Mass pillow block:208 kg; P180°:160 kN; RG:1 NPT; Initial grease fill:1672.65 g; R2:42.069 mm; A2:339.725 mm; Cap bolt recommended tightening torque:1735.4 N·m;
PCI VTRY 5.50 Cam Follower and Track Roller - Yoke Type	Limiting speed:3400 r/min; Basic dynamic load rating C:212 kN; J max.:257.175 mm; A:101.6 mm; J1:53.975 mm; L:304.8 mm; H2:47.625 mm; Mass bearing unit:10.9 kg; J min.:231.775 mm; Attachment bolt diameter G:15.875 mm;
PCI CIR-3.00-SS Roller Bearings	d:30.000 mm; Basic Dynamic Radial Load Rating C:30200 N; Basic Static Radial Load Rating Co:28000 N; Sealed Speed Rating n3:7000 rpm; D:62.0000 mm; Grease Speed Rating n1:7000 rpm; Fillet Radius ra:1.00 mm; B:23.80 mm; Accessories:No Shield, no Seal,; Oil Speed Rating n2:9500 rpm;
PCI VTRY-8.50 Cam Follower and Track Roller - Yoke Type	Basic Radial Load Rating-Static SCO:6740 N; Basic Radial Load Rating-Dynamic DC:9800 N; Inside Diameter D:49.2125 mm; Adapter Sleeve AS:SNW11; Speed Rating-Open and Shielded-Grease OSG:6300 rpm; B:21.00 mm; Speed Rating-Open and Shielded-Oil OSO:7500 rpm; D:99.9998 mm; Fillet Radius ra:1.50 mm; Speed Rating-Single and Double Sealed Grease SDG:4300 rpm;
PCI VTRE-3.50 Cam Follower and Track Roller - Stud Type	with tapered bore:1217 ; Static (Cor):50.570 kN; Pu:20.300 kN; d:85 mm; B1:mm; D:150 mm; with cylindrical bore:4 700 min-1; Grease:0.830 kN; Oil:4 000 min-1; rs Dynamic (Cr):2 mm;
PCI PDCY-4.00 Cam Follower and Track Roller - Yoke Type	d:170 mm; Hydraulic nut:HMV 34 E; Lock nut:KMFE 34; B1:122 mm; d3:220 mm; B:33 mm; Mass adapter sleeve assembly:8.1 kg; G:M 170x3; d1:150 mm;
PCI FTR-2.50 Cam Follower and Track Roller - Stud Type	H2:25.4 mm; P60°:35.1 kN; Bearing:22309 E; P150°:12 kN; End plug (suffix Y):EPR 4; J min.:187.325 mm; da:45 mm; J max.:200.025 mm; Cap bolt recommended tightening torque:149.1 N·m; h:32.544 mm;
PCI VTRE-5.50 Cam Follower and Track Roller - Stud Type	Mass adapter sleeve assembly:7.35 kg; G:M 160x3; Lock nut:KMFE 32; d:160 mm; B:32 mm; d1:140 mm; d3:210 mm; B1:119 mm; Hydraulic nut:HMV 32 E;
PCI PTRY-4.00 Cam Follower and Track Roller - Yoke Type	T:36 mm; r1s (min):2.5 mm; rs (min):3 mm; Static (Coa):178 kN; Pu:21.550 kN; D:140 mm; Dynamic (Ca):150 kN; a:44 mm; r2s (min):1 mm; B:33 mm;
PCI FTRY-2.00 Cam Follower and Track Roller - Yoke Type	Fillet Radius rb:0.30 mm; B:12.00 mm; Grease Speed Rating n1:39000 rpm; Basic Dynamic Radial Load Rating C:10800 N; Oil Speed Rating n2:56000 rpm; d:20.000 mm; Basic Static Radial Load Rating Co:6200 N; D:42.0000 mm; Fillet Radius ra:0.60 mm;
PCI FTR-4.00 Cam Follower and Track Roller - Stud Type	B4:16.916 mm; B:15.342 mm; B1:81.128 mm; Lock washer:W 16; G:79.68 mm; Lock nut:AN 16; Threads per inch:12; Hydraulic nut:HMVC 16E; d1:69.85 mm; Mass adapter sleeve assembly:1.45 kg;

PCI VTR-2.00 - Cam Follower and Track Roller - Stud ...

2" Roller Diameter; 27/32" Roller Width; V Groove Roller Surface; Stud Type; 1/2" Stud Diameter; 1/2-20 Thread; Standard Stud; Sealed; Ball Bearing - Double ...

NEW PCI VTR-2.00 V-GROOVE TRACK ROLLER STUD STYLE ...

NEW PCI VTR-2.00 V-GROOVE TRACK ROLLER STUD STYLE BEARING 2" DIA VTR200.

PCI VTR-2.00 V GROOVE TRACK ROLLER STUD STYLE ...

The VTR-2.00 is produced by PCI and is described as a PCI VTR-2.00 V GROOVE TRACK ROLLER STUD STYLE BEARING VGROOVE 2 DIAMETER.

NEW PCI VTR-2.00 V-GROOVE TRACK ROLLER STUD ...

Mini PCI-E Wireless WIFI 4G/3G/2G Adapter APP Timed boot Card US ... NEW PCI VTR-2.00 V-GROOVE TRACK ROLLER STUD STYLE BEARING 2" DIA VTR200.