| No. | Brand | d | J | a | h | F | L | H | S |
| PTRE-1.75 | PCI | - | - | - | - | - | - | - | 4.763 mm |
| FTR-1.50 | PCI | - | - | - | - | - | - | - | - |
| HPDC-6.00 | PCI | - | - | - | - | - | - | - | - |
| YCF-3.00-S | PCI | 45.000 mm | - | - | - | - | - | - | - |
| PTRY-3.50 | PCI | 75.000 mm | - | - | - | - | - | - | - |
| PTRY-8.00 | PCI | - | - | - | - | - | - | - | - |
| VTRE-1.50 | PCI | 40 mm | - | - | - | - | - | 13 mm | - |
| VTR-2.00-SS | PCI | 10 mm | - | - | - | 14 mm | - | - | - |
| VTRY-5.00 | PCI | - | - | - | - | - | - | - | - |
| VTR-3.50 | PCI | 850 mm | - | - | - | - | - | - | - |
| HCF-2.75-SH | PCI | - | - | - | - | - | - | 74.1 mm | - |
| VTR-2.50 | PCI | 340 mm | - | - | - | - | - | - | - |
| PTR-2.00-SS | PCI | 140.000 mm | - | - | - | - | - | - | - |
| PTR-3.50 | PCI | - | - | - | - | - | - | 358.775 mm | - |
| YSH-.437 | PCI | - | - | - | - | - | - | - | - |
| 1424HD | PCI | - | - | - | - | - | - | - | - |
| VTR-3.50E | PCI | - | - | - | - | - | - | - | 4.763 mm |
| PTRE-1.50 | PCI | 30 mm | - | - | - | - | - | - | - |
| VTRE-5.50 | PCI | 160 mm | - | - | - | - | - | - | - |
| VTRY-3.50 | PCI | - | - | - | - | - | - | - | - |
| PTRY-3.00-SS | PCI | 480 mm | - | - | - | - | - | - | - |
| CIRE-5.00E-1 | PCI | 75.000 mm | - | - | - | - | - | - | - |
| PTRE-2.00-R | PCI | 55.000 mm | - | - | - | - | - | - | - |
| VTRE-3.50E | PCI | - | - | - | - | 52.5 mm | - | - | - |
| PTR-3.00 | PCI | - | - | - | - | - | - | 323 mm | - |
| FTR-4.00 | PCI | - | - | - | - | - | - | - | - |
| PCI FTR-2.50 Cam Follower and Track Roller - Stud Type | H2:25.4 mm; P60°:35.1 kN; Bearing:22309 E; P150°:12 kN; End plug (suffix Y):EPR 4; J min.:187.325 mm; da:45 mm; J max.:200.025 mm; Cap bolt recommended tightening torque:149.1 N·m; h:32.544 mm; |
| PCI PTR-1.50 Cam Follower and Track Roller - Stud Type | d:60.000 mm; Grease Speed Rating n1:5400 rpm; Fillet Radius rb:1.00 mm; Oil Speed Rating n2:7000 rpm; D:110.0000 mm; Basic Static Radial Load Rating Co:44000 N; B:22.00 mm; Fillet Radius ra:1.50 mm; Basic Dynamic Radial Load Rating C:52700 N; |
| PCI VTRE-3.50E Cam Follower and Track Roller - Stud Type | da min.:48.4 mm; Mass bearing:0.25 kg; rb max.:0.6 mm; Axial load factor Y:0.6; F:52.5 mm; B:16 mm; D:75 mm; D1 ≈:65.3 mm; s max.:0.9 mm; Basic dynamic load rating C:44.6 kN; |
| PCI FTR-4.00 Cam Follower and Track Roller - Stud Type | B4:16.916 mm; B:15.342 mm; B1:81.128 mm; Lock washer:W 16; G:79.68 mm; Lock nut:AN 16; Threads per inch:12; Hydraulic nut:HMVC 16E; d1:69.85 mm; Mass adapter sleeve assembly:1.45 kg; |
| PCI PDCY-5.00 Cam Follower and Track Roller - Yoke Type | G:M 52x3; d2 max.:137 mm; Basic static load rating C0:360 kN; B:44 mm; Basic dynamic load rating C:245 kN; Material constant KM:330; C1 max.:39 mm; dk:80 mm; l7 min.:73 mm; r1 min.:1 mm; |
| PCI CIRE-5.00E-1 Roller Bearings | Basic Static Radial Load Rating Co:137000 N; Accessories:No Shield, no Seal; B:41.30 mm; Grease Speed Rating n1:3200 rpm; Basic Dynamic Radial Load Rating C:108000 N; Fillet Radius ra:1.50 mm; d:75.000 mm; Sealed Speed Rating n3:3200 rpm; D:130.0000 mm; Oil Speed Rating n2:4300 rpm; |
| PCI VTRE-3.50 Cam Follower and Track Roller - Stud Type | with tapered bore:1217 ; Static (Cor):50.570 kN; Pu:20.300 kN; d:85 mm; B1:mm; D:150 mm; with cylindrical bore:4 700 min-1; Grease:0.830 kN; Oil:4 000 min-1; rs Dynamic (Cr):2 mm; |
| PCI SCF-3.25-S Cam Follower and Track Roller - Stud Type | B:41.30 mm; Fillet Radius ra:1.50 mm; Sealed Speed Rating n3:3200 rpm; Accessories:Two Seals; D:130.0000 mm; Basic Static Radial Load Rating Co:137000 N; d:75.000 mm; Basic Dynamic Radial Load Rating C:108000 N; Grease Speed Rating n1:3200 rpm; Oil Speed Rating n2:4300 rpm; |
| PCI VTR-1.50-SS Ball Bearings | Reference speed:28000 r/min; Fatigue load limit Pu:0.9 kN; Fw:10 mm; Basic static load rating C0:8 kN; Mass needle roller and cage assembly:0.0023 kg; Limiting speed:32000 r/min; Basic dynamic load rating C:5.94 kN; U:13 mm; Ew:13 mm; |
| PCI VTR-8.50 Cam Follower and Track Roller - Stud Type | Ca:89.789 mm; Stabilizing ring:2 x 38151-38; Mass pillow block:90.7 kg; P120°:85.9 kN; P180°:94.3 kN; J1:95.25 mm; A1:158.75 mm; Appropriate attachment bolt size G:1 in; Cap bolt:4 x 3/4-10 UNC; Initial grease fill:793.8 g; |
| PCI JNLW 7/16-20 Ball Bearings | Accessories:Synthetic Rubber Sea; Grease Speed Rating Open/Shielded n1:17000 rpm; D:40.0000 mm; Basic Static Radial Load Rating Co:4500 N; Fillet Radius ra:0.64 mm; d:17.000 mm; Basic Dynamic Radial Load Rating C:9560 N; B:17.46 mm; Oil Speed Rating Open/Shielded n2:20000 rpm; Sealed Speed Rating n3:12000 rpm; |
| PCI SCF-4.00-SH Cam Follower and Track Roller - Stud Type | B:35.00 mm; Accessories:One Seal; Oil Speed Rating Open/Shielded n2:5600 rpm; Sealed Speed Rating n3:3100 rpm; Basic Static Radial Load Rating Co:69500 N; Fillet Radius ra:2.00 mm; D:150.0000 mm; Basic Dynamic Radial Load Rating C:108000 N; Grease Speed Rating Open/Shielded n1:4800 rpm; d:60.000 mm; |
| PCI CIR-4.00-1 Roller Bearings | Grease Speed Rating n1:3400 rpm; Sealed Speed Rating n3:3400 rpm; D:130.0000 mm; d:60.000 mm; Oil Speed Rating n2:4500 rpm; B:54.00 mm; Basic Dynamic Radial Load Rating C:134000 N; Basic Static Radial Load Rating Co:143000 N; Accessories:Two Shields & Snap-R; Fillet Radius ra:2.00 mm; |
| PCI FTRY-1.75 Ball Bearings | B:120 mm; Limiting speed:2700 r/min; d2 ≈:213 mm; Calculation factor Y0:2; D:360 mm; r1,2 min.:4 mm; b:16.7 mm; ra max.:3 mm; da min.:187 mm; d:170 mm; |
| PCI VTRE-1.50-SS Roller Bearings | Calculation factor Y:1.5; Fatigue load limit Pu:18.3 kN; Limiting speed:7000 r/min; d1 ≈:70.8 mm; C:24.5 mm; db min.:59 mm; Db min.:87 mm; rb max.:1.5 mm; Ca min.:5 mm; ra max.:1.5 mm; |
| PCI HCCF-3.00-SH Cam Follower and Track Roller - Stud Type | Da max.:70.4 mm; Basic dynamic load rating C:28.6 kN; ra max.:1 mm; db min.:49.6 mm; Fatigue load limit Pu:0.95 kN; Calculation factor f2D:1.09; Number of balls z:17; Calculation factor fHC:1.02; Calculation factor f2B:1.02; d:45 mm; |
Stud Type Heavy On PCI ProCal, Inc.
PCI Cam Followers have a black oxide finish on all external surfaces. ... SCF-3.50-SH-THT 3.500 2.00 1.375 2.75 1 3/8 - 12 1.38 ... HCF-2.75-S.
PCI HCF-2.75-SH - Seguidor de leva y rodillo de carril - BDI
PCI,HCF-2.75-SH..,2-3/4,Roller,Diameter;,1-1/2,Width;,Flat,Surface;,Stud,Type;,1-1/4,1-1/4-12,Thread;,Heavy,Stud;,Sealed;,Needle,Bearing;,Relubricatable; ...
pci hcf-2.75-sh cam follower stud style sealed hex bearing ...
The HCF-2.75-SH is produced by PCI and is described as a PCI HCF-2.75-SH CAM FOLLOWER STUD STYLE SEALED HEX BEARING CAM FOLLOWER HEAVY STUD 2.75 DIAMETER.
PCI HCF-2.75-SH Cam Follower And Track Roller - Stud Type ...
Brand Name: PCI. Model Number: HCF-2.75-SH. T min.: -20 °C. B: 27 mm. C: 14 kN. H1: 10 mm. s1: 13.5 mm. N: M10. L1: 21 mm. A: 36 mm. Product Details. T min.
PCI HCF-2.75-SH-370516 Bearings | HCF-2.75-SH-370516 Bearing
The online PCI HCF-2.75-SH-370516 Bearings Angular Contact Keyword String parts Jinan Kaidong Bearing Co., Ltd. store gives you immediate access ...
PCI, ProCal Innovations LLC HCF-2.75-SH | Turtle & Hughes
HCF 2.75 SH CAM FOLLOWER. ... Brand Name, PCI, ProCal Innovations LLC. Part #:, MOI HCF-2.75-SH. MPN, HCF-2.75-SH. UPC, 841946104366.
PCI HCF-2.75-SH Cam Follower and Track Roller - Stud Type
Bearing No. HCF-2.75-SH. Category. Cam Follower and Track. Roller - Stud Type. Inventory. 0.0. Manufacturer Name. PROCAL INNOVATIONS. LLC. WWW.PCIMFG.COM.
PCI HCF-2.75-SH Cam Follower and Track Roller - Stud Type - HCF ...
PCI HCF-2.75-SH Cam Follower and Track Roller - Stud Type in Stock & AMERICAN BEARING MFG.CORP. Ready to Ship In Stock Availability: Now!
PCI HCF-2.75-SH Cam Follower and Track Roller - Stud Type Video