| PCI PDCY-5.00 Cam Follower and Track Roller - Yoke Type | G:M 52x3; d2 max.:137 mm; Basic static load rating C0:360 kN; B:44 mm; Basic dynamic load rating C:245 kN; Material constant KM:330; C1 max.:39 mm; dk:80 mm; l7 min.:73 mm; r1 min.:1 mm; |
| PCI VTR-8.50 Cam Follower and Track Roller - Stud Type | Ca:89.789 mm; Stabilizing ring:2 x 38151-38; Mass pillow block:90.7 kg; P120°:85.9 kN; P180°:94.3 kN; J1:95.25 mm; A1:158.75 mm; Appropriate attachment bolt size G:1 in; Cap bolt:4 x 3/4-10 UNC; Initial grease fill:793.8 g; |
| PCI VTR-1.50 Cam Follower and Track Roller - Stud Type | Tolerance housing:H7; Coefficient of friction µ min.:0.03; Specific static load factor K0:200 N/mm²; Mass bushing:0.73 kg; D:145 mm; Coefficient of friction µ max.:0.08; Effective load carrying cross section A:15340 mm²; B:120 mm; Permissible sliding velocity v max.:0.5 m/s; d:130 mm; |
| PCI SCCF-3.25-SH Cam Follower and Track Roller - Stud Type | RG:3/8 NPT; Housing:SAF 522; L:419.1 mm; Labyrinth ring:2 x LOR 557; PG:1/4 NPT; ba:42.069 mm; H2:50.8 mm; Pa:12.5 kN; P60°:149 kN; R1:67.866 mm; |
| PCI VTRE-4.50 Cam Follower and Track Roller - Stud Type | da max.:57 mm; Da min.:79 mm; K:8.5 mm; r5 min.:0.6 mm; Calculation factor Y0:0.8; Basic dynamic load rating C:194 kN; Da max.:92 mm; Calculation factor Y2:1.2; Calculation factor Y1:0.81; Basic static load rating C0:204 kN; |
| PCI PTR-1.00 Cam Follower and Track Roller - Stud Type | a:28 mm; d2:85 mm; rs (min):1.5 mm; r1s (min):1.5 mm; T:29 mm; r2s (min):0.6 mm; Pu:25.480 kN; C:22 mm; Static (Coa):215 kN; B:29 mm; |
| PCI YCF-3.00-S Cam Follower and Track Roller - Yoke Type | Basic Dynamic Radial Load Rating C:23400 N; d:45.000 mm; D:75.0000 mm; Accessories:Two Shields; B:16.00 mm; Grease Speed Rating Open/Shielded n1:9000 rpm; Basic Static Radial Load Rating Co:16600 N; Sealed Speed Rating n3:5600 rpm; Fillet Radius ra:1.00 mm; Oil Speed Rating Open/Shielded n2:11000 rpm; |
| PCI PDC-3.00 Cam Follower and Track Roller - Stud Type | Permissible sliding velocity v min.:0 m/s; B1:8 mm; Specific static load factor K0:45 N/mm²; Mass bushing:0.73 kg; Specific dynamic load factor K:25 N/mm²; Coefficient of friction µ min.:0.08; a:3 mm; h:56 mm; D1:80 mm; Permissible sliding velocity v max.:0.5 m/s; |
| PCI VTR-4.50 Cam Follower and Track Roller - Stud Type | a:5.556 mm; S:0.794 mm; Attachment bolt diameter G:4 x 22.225; L:247.65 mm; N1:23.813 mm; A6:31.75 mm; Basic dynamic load rating C:426 kN; J:196.85 mm; A:88.9 mm; Mass bearing unit:30.9 kg; |
| PCI CIR-4.00-1 Roller Bearings | Grease Speed Rating n1:3400 rpm; Sealed Speed Rating n3:3400 rpm; D:130.0000 mm; d:60.000 mm; Oil Speed Rating n2:4500 rpm; B:54.00 mm; Basic Dynamic Radial Load Rating C:134000 N; Basic Static Radial Load Rating Co:143000 N; Accessories:Two Shields & Snap-R; Fillet Radius ra:2.00 mm; |
| PCI 1424HD Mounted Units & Inserts | Reference speed:4000 r/min; G1:9 mm; d1:80 mm; Fatigue load limit Pu:35.5 kN; B2 ≈:56 mm; da max.:114 mm; Ca min.:1.3 mm; Basic static load rating C0:320 kN; s1 max.:7.1 mm; G:M 95x2; |
| PCI CIRE-5.00E-1 Roller Bearings | Basic Static Radial Load Rating Co:137000 N; Accessories:No Shield, no Seal; B:41.30 mm; Grease Speed Rating n1:3200 rpm; Basic Dynamic Radial Load Rating C:108000 N; Fillet Radius ra:1.50 mm; d:75.000 mm; Sealed Speed Rating n3:3200 rpm; D:130.0000 mm; Oil Speed Rating n2:4300 rpm; |
| PCI CTR-1.25-SS Roller Bearings | L:466.725 mm; P150°:118 kN; PG:1/4 NPT; Eye bolt:2 x 3/8-16 UNC; J1:82.55 mm; RG:1/2 NPT; N1:23.813 mm; Bearing limiting speed:3600 r/min; H2:60.325 mm; Adapter sleeve assembly:SNW 26x4.3/8; |
| PCI PTR-2.00 Cam Follower and Track Roller - Stud Type | r, r1,2 min.:1 mm; Mass inner ring:0.31 kg; F:80 mm; B:35 mm; d:70 mm; |
| PCI PTR-3.00 Cam Follower and Track Roller - Stud Type | Locating ring:2 x FRB 5/270; Da:270 mm; N4 max.:12 mm; P90°:730 kN; Appropriate attachment bolt, size G:24 mm; H1:160 mm; End cover:ASNH 530 R; Cap bolt, size:M 24x130; Appropriate attachment bolt, rec. tightening torque:665 N·m; H:323 mm; |
| PCI PTR-1.25 Cam Follower and Track Roller - Stud Type | B:27.00 mm; d:35.000 mm; Oil Speed Rating n2:8000 rpm; D:72.0000 mm; Basic Static Radial Load Rating Co:27500 N; Basic Dynamic Radial Load Rating C:37700 N; Fillet Radius ra:1.00 mm; Grease Speed Rating n1:6000 rpm; Accessories:One Seal; Sealed Speed Rating n3:6000 rpm; |