| SMITH MPCR-30 Cam Follower and Track Roller - Stud Type | Type:Bearings with Housin; Number of Bearings:Double; Bearing Part Number:628; Width T(mm):35; Volume Discount:Available; Flange O.D. H(φ):47; Shape:Flange Type; Bearing Retained:No; Bearing Used:Deep Groove Ball Bea; Days to Ship:7 Days; |
| SMITH MCR-85-S Cam Follower and Track Roller - Stud Type | Dynamic Load Rating:135,000 N; a:44.5 mm; D:190 mm; Limiting Speed - Grease:2,900 rpm; r1:1.1 mm; Fillet Radius/Chamfer:2.1 mm; Weight:3.930 kg; Configuration:Single Row; Limiting Speed - Oil:3,900 rpm; B:36 mm; |
| SMITH MCRV-62-S Cam Follower and Track Roller - Stud Type | Cg - Geometry Factor8:0.0662; da - Inner Ring Backing Diameter:110.000 mm; C0 - Static Radial Rating:584000 N; Da - Outer Ring Backing Diameter:162.000 mm; Bearing Weight:7.5 Kg; C1(2) - Dynamic Radial Rating (Two-Rows):543000 N; Reference Thermal Speed Rating (Grease):3000; Superseded Part:22317YMW33W800W25C4; Design Unit:METRIC; r - Outer Ring To Clear Radius2:2.500 mm; |
| SMITH HR-2-B Cam Follower and Track Roller - Stud Type | C1 - Dynamic Radial Rating (1 million revolutions)6:49800 lbf; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:22500 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:8080 lbf; R - Cone Backface To Clear Radius3:0.06 in; Cg - Geometry Factor:0.168; Cage Type:Stamped Steel; C90 - Dynamic Radial Rating (90 million revolutions)5:12900 lbf; B - Cone Width:1.1250 in; G1 - Heat Generation Factor (Roller-Raceway):1030; |
| SMITH MCR-22 Cam Follower and Track Roller - Stud Type | RoHS:6; Raceway Ring Shape:Tapered Roller; Inner/Outer Ring Material:Steel; Size Standards:Metric System; Outer Ring Type:Flat; Specifications/Environment:Standard; Cone roller bearing large-capacity type (symbol: 4T-orU):U; Precision (JIS):Grade 4; Number of Raceway Ring Rows:Single Row; |
| SMITH IRR-1-7/8 Needle Non Thrust Roller Bearings | Seals:ZZ (Double Shield); Holder Surface Treatment:Clear Anodize; RoHS:6; Type:Bearings with Housin; Flange O.D. H(φ):47; Bearing Part Number:628; Number of Bearings:Single; Shape:Flange Type; Bearing Used:Deep Groove Ball Bea; |
| SMITH DCR-2-1/4 Cam Follower and Track Roller - Stud Type | Seal:LO509/ 1-1/2; C0 Static Load Rating:108; Max Grease Speed:5500; Shaft Diameter d:1 1/2 in; Material :Cast Iron; Bearing:22209K; N1:20.00 mm; Locating Rings (width x OD):SR85X3.5; H:109 mm; J:170.00 mm; |
| SMITH MCRV-35-S Cam Follower and Track Roller - Stud Type | Surface Treatment:No; Accessory:No Cover; Unit, Type:Insert Bearing Unit; Unit Body Material:Cast Iron; Grease Type:SH44M; Basic Load Rating, Dynamic Rating(N):67400; Fit:J7; Rolling Element Material:Bearing Steel; Basic Load Rating, Static Rating(N):48300; Seal:Silicone; |
| SMITH YR-2-X Cam Follower and Track Roller - Yoke Type | Dimension L:6.0 in; Dimension V:0.1 in; Maximum Speed:2340 rpm; Cor - Static Load Rating:82280 lbf; Shaft Size:105 mm; Ca - Axial Load Rating:3596.90 lbf; Bearing - Housing - Seal UPC:013992070494; Bearing UPC:013992027849; Series Type:Light Series; Dimension P:0.7 in; |
| SMITH CR-3/4-XBE Cam Follower and Track Roller - Stud Type | db - Cone Backface Backing Diameter:4.84 in; G1 - Heat Generation Factor (Roller-Raceway):163.7; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:29600 lbf; Aa - Cage-Cone Backface Clearance:0.28 in; da - Cone Frontface Backing Diameter:4.32 in; Cage Type:Stamped Steel; a - Effective Center Location4:0.32 in; C0 - Static Radial Rating:103000 lbf; d:3.3125 in; Cone Part Number:H919942; |
| SMITH FCR-2-3/4 Cam Follower and Track Roller - Stud Type | Size Standards:Metric System; Max. Allowed rpm(rpm):4600; B:35; Specifications/Environment:Standard; D:150; Outer Ring Shape:Flat; Days to Ship:9 Days; Precision:Grade 0; Rolling Element Material:Steel; Retainer Type:Punching; |
| SMITH CR-1-5/8-X-SS Cam Follower and Track Roller - Stud Type | Bearing Style:Open Type; O.D.(Ø):85; Days to Ship:11 Days or more; Preload Mark:No; Symbol of contact angle:C; Rolling Element Material:[Steel] Steel; Symbol of Bearing Ring Shape:No; Load Direction:Radial; Max. Allowed rpm(rpm):12000; Precision:Grade 5; |
| SMITH HR-1-1/8-B Cam Follower and Track Roller - Stud Type | Volume Discount:Available; Number of Bearings:Double; Bearing Retained:Yes (with retaining; Width T(mm):35; Seals:ZZ (Double Shield); Bearing I.D. d(mm):12; Shape:Flanged Pilot Type; RoHS:6; Housing Material:304 Stainless Steel; |
| SMITH MCR-13-S Cam Follower and Track Roller - Stud Type | Days to Ship:6 Days; Surface Treatment:Black Oxide Coating; Roller Lining:None; RoHS:6; Material:[Carbon Steel] 1045; D(φ):20; Volume Discount:Available; Shaft:None; L(mm):38; Category:Roller Follower Pin; |
| SMITH HR-1-1/4-XB Cam Follower and Track Roller - Stud Type | Number of Bearings:Double; Bearing I.D. d(mm):40; Days to Ship:8 Days; Seals:ZZ (Double Shield); Width T(mm):50 ～ 120; Type:Bearings with Housin; Bearing Used:Deep Groove Ball Bea; RoHS:6; Flange O.D. H(φ):114; Holder Surface Treatment:Black Oxide Coating; |
| SMITH MCRV-80 Cam Follower and Track Roller - Stud Type | Dimension N:17 in; Dimension H:4.6 in; Cor - Static Load Rating:262577 lbf; Bearing Type:Split Cylindrical Ex; Dimension P:1.4 in; Bearing - Housing - Seal:LSE808BXHATL; Bearing Number:LSE808BX; Maximum Speed:930 rpm; Bolt Size:4 x M30; Note:This product line wa; |