No. | Brand | D | a | G | N | H | J | A | L |
MCRV-62-S | SMITH | - | - | - | - | - | - | - | - |
IRR-1-7/8 | SMITH | - | - | - | - | - | - | - | - |
MVCR-26 | SMITH | - | - | - | - | - | - | - | - |
CR-1-3/8-XC | SMITH | - | - | - | - | - | - | - | - |
DCR-2-1/4 | SMITH | - | - | - | - | 109 mm | 170.00 mm | - | - |
HR-1-1/8-B | SMITH | - | - | - | - | - | - | - | - |
MYRV-20-S | SMITH | 110 | - | - | - | - | - | - | - |
CR-1-5/8-X-SS | SMITH | - | - | - | - | - | - | - | - |
CR-1/2-A-B | SMITH | - | - | - | - | - | - | - | - |
BYR-2-1/4-XC | SMITH | - | - | - | - | - | - | - | - |
HR-3-1/4 | SMITH | - | - | - | - | - | - | - | - |
MYRV-20-C | SMITH | - | - | - | - | - | - | - | - |
MCR-19-S | SMITH | - | - | - | - | - | - | - | - |
HR-4-XBC | SMITH | - | - | - | - | - | - | - | - |
BCR-2-1/4 | SMITH | - | - | - | - | - | - | - | - |
FCR-3-1/4-E | SMITH | - | - | - | - | - | - | - | - |
MPYR-250 | SMITH | - | - | - | - | - | - | - | - |
MPCR-72 | SMITH | - | - | - | - | - | - | - | - |
MPCR-100 | SMITH | 40 | - | - | - | - | - | - | - |
BCR-1/2-X | SMITH | - | - | - | - | - | - | - | - |
BYR-2-1/2-X | SMITH | - | - | - | - | - | - | - | - |
HR-3-X | SMITH | - | - | - | - | - | - | - | - |
YR-2-1/2-XC | SMITH | - | - | - | - | - | - | 77.00 mm | 185.00 mm |
MYR-10 | SMITH | - | - | - | - | - | - | - | - |
MPCR-30 | SMITH | - | - | - | - | - | - | - | - |
MCR-16-S | SMITH | - | - | - | - | - | - | - | - |
SMITH YR-3 Cam Follower and Track Roller - Yoke Type | Cg - Geometry Factor:0.0474; C1 - Dynamic Radial Rating (1 million revolutions)6:33200 N; a - Effective Center Location4:-4.3 mm; da - Cone Frontface Backing Diameter:26 mm; G2 - Heat Generation Factor (Rib-Roller End):7.3; C0 - Static Radial Rating:33000 N; G1 - Heat Generation Factor (Roller-Raceway):7.1; Aa - Cage-Cone Backface Clearance:-0.5 mm; Ab - Cage-Cone Frontface Clearance:2.8 mm; db - Cone Backface Backing Diameter:27.5 mm; |
SMITH CR-9/16 Cam Follower and Track Roller - Stud Type | Design Units:Imperial; Cup Part Number:HM256810; Bearing Weight:146.6 lb; Db - Cup Backface Backing Diameter:15.51 in; Ab - Cage-Cone Frontface Clearance:0.2 in; C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)3:75600 lbf; D:16.6250 in; K - Factor7:1.73; da - Cone Frontface Backing Diameter:12.78 in; d:11.8125 in; |
SMITH CR-1-1/8-SS Cam Follower and Track Roller - Stud Type | Bearing Used:Deep Groove Ball Bea; RoHS:6; Shape:Bottom Mount; Number of Bearings:Single; Bearing Retained:Yes (with retaining; Days to Ship:14 Days; Housing Material:304 Stainless Steel; Bearing Material:Steel; Volume Discount:Available; |
SMITH BYR-1-1/8-X Cam Follower and Track Roller - Yoke Type | Lubrication Type:Relubricatable; Outside Ring Width C:21.000 mm; Inner Ring Width B:42.86 mm; Dynamic Load Rating:8130 lbf; Material:Bearing Steel; Bearing Type:Ball Bearing; Number of Set Screws:2; Angle between Set Screws:90 º; Dimension B2:0.720 in; Series:Industrial; |
SMITH HR-1-1/8-XBC Cam Follower and Track Roller - Stud Type | C0 - Static Load:54100 lb; Dimension M:2.37 in; Dimension L:3.86 in; Oil Lubrication - T Seal:2900 rpm; Dimension J (Bolt Size):0.875 in; e - Geometry Factor:0.22; Oil Lubrication - B/C/O Seal:1300 rpm; Shaft Size Type:Metric; Dimension D Max:10.44 in; Dimension F:13.000 in; |
SMITH HR-3-1/4-XB Cam Follower and Track Roller - Stud Type | a - Effective Center Location3:-3.3 mm; Cup Part Number:L44610; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:1330 lbf; B - Cone Width:14.732 mm; Cage Type:Stamped Steel; B:14.224 mm; da - Cone Frontface Backing Diameter:29.46 mm; D:50.292 mm; r - Cup Backface To Clear Radius2:1.27 mm; Bearing Weight:0.10 Kg; |
SMITH YR-1-XC Cam Follower and Track Roller - Yoke Type | Screw Type:Metric (fine) Thread; Shape:Round shape; Sales Unit:Low Quantity (can be; Days to Ship:6 Days; Material:[Steel] 1018 Carbon; Nominal Number:HLB-08; Volume Discount:Available; Type:Lock Nut; Thread Nominal M(mm):M40X1.5; |
SMITH DCR-3-1/4 Cam Follower and Track Roller - Stud Type | Note:This product line wa; Housing Width:6.1 in; Bolt Size:4 x 1; Dimension J1 :17-23/64 in; Dimension L :19-45/64 in; Seal Type:High Temperature Pac; Cor - Static Load Rating:111488 lbf; Series Type:Light Series; Shaft Size:4.75 in; Dimension H2:13.5 in; |
SMITH CR-5/8-BC-SS Cam Follower and Track Roller - Stud Type | Rolling Element Material:Bearing Steel; Stroke:No; Basic Load Rating, Dynamic Rating(N):62000; Days to Ship:9 Days; Unit, Type:Insert Bearing Unit; Surface Treatment:No; Accessory:With steel plate cov; Bearing Unit, Type:Square flange shape; Machining:No; RoHS:6; |
SMITH HR-1-1/8-X Cam Follower and Track Roller - Stud Type | Bearing Used:Deep Groove Ball Bea; Flange Shape:Round Type; Bearing Material:[Steel] Steel; Shape:Flanged Pilot Type; Type:Bearings with Housin; Holder Surface Treatment:Black Oxide Coating; Bearing Part Number:6204; Seals:DD (Contact Rubber S; Bearing Retained:No; Days to Ship:8 Days or more; |
SMITH CR-1-5/8-XC-SS Cam Follower and Track Roller - Stud Type | Da - Cup Frontface Backing Diameter:6.14 in; D:6.7500 in; Design Units:Imperial; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:14500 lbf; Series:835; Cage Type:Stamped Steel; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5:49200 lbf; C - Double Cup Width:3.9375 in; r - Cup Frontface To Clear Radius2:0.03 in; Cg - Geometry Factor11:0.0937; |
SMITH IRR-1-7/8 Needle Non Thrust Roller Bearings | Seals:ZZ (Double Shield); Holder Surface Treatment:Clear Anodize; RoHS:6; Type:Bearings with Housin; Flange O.D. H(φ):47; Bearing Part Number:628; Number of Bearings:Single; Shape:Flange Type; Bearing Used:Deep Groove Ball Bea; |
SMITH HR-4-XBC Cam Follower and Track Roller - Stud Type | e - Geometry Factor:0.25; Oil Lubrication - M/N Seal:1800 rpm; Dimension L Fix:3.51 in; Dimension E:5.38 in; Y2 - Geometry Factor:4.00; Pre Install Clearance Max:0.0026 in; Oil Lubrication - T Seal:3200 rpm; Shaft Size :65 mm; Eng Internal Radial Clearance - Min:0.0016; Dimension F:6.63 in; |
SMITH FCR-3-1/4-E Cam Follower and Track Roller - Stud Type | Bearing Retained:Yes (with retaining; Shape:T-Shaped; Number of Bearings:Single; Bearing Part Number:6800; Type:Bearings with Housin; Bearing Used:Deep Groove Ball Bea; Width T(mm):10; C Chamfered:Not Provided; |
SMITH MCR-52-SBC Cam Follower and Track Roller - Stud Type | Seal Part Structure:Double Shielded; Specifications, Environment:Standard; d:3; Precision:Class 0; Allowable Rotational Speed(rpm):60000; Bearing Style:Double Shielded; Size Standards:Metric Series; Outer Ring Shape:Standard; RoHS:6; Number of Raceway Ring Rows:Single Track; |
SMITH HR-1-1/2-B Cam Follower and Track Roller - Stud Type | Bearing Used:Deep Groove Ball Bea; Bearing Retained:Yes (with retaining; Seals:DD (Contact Rubber S; RoHS:6; Days to Ship:8 Days; Height Indication:Height Selection; Shape:Bottom Mount; |
SMITH DYR-1-3/8 Cam Follower and Track Roller - Yoke Type Video