No. | Brand | D | a | G | N | H | J | A | L |
DYR-1-3/8 | SMITH | - | - | - | - | - | - | - | - |
YR-2-1/2-XC | SMITH | - | - | - | - | - | - | 77.00 mm | 185.00 mm |
BCR-1-7/8-XBC | SMITH | - | - | - | - | - | - | - | - |
YAG-14 | SMITH | - | - | - | - | - | - | - | - |
CR-3-1/4-X | SMITH | 120 mm | - | - | - | - | - | - | - |
BCR-1/2-X | SMITH | - | - | - | - | - | - | - | - |
MPCR-26 | SMITH | - | - | - | - | - | - | - | - |
MCR-22 | SMITH | - | - | - | - | - | - | - | - |
FCR-1-3/4-E | SMITH | - | - | - | - | - | - | - | - |
DCR-2-1/2 | SMITH | 140 | - | - | - | - | - | - | - |
CR-1-3/4-XB-SS | SMITH | - | - | - | - | - | - | - | - |
MCR-72-SBC | SMITH | - | - | - | - | - | - | - | - |
MCR-35-SC | SMITH | - | - | - | - | - | - | - | - |
YAG-03-C | SMITH | - | - | - | - | - | - | - | - |
BCR-2-1/4 | SMITH | - | - | - | - | - | - | - | - |
MYR-5-C | SMITH | - | - | - | - | - | - | - | - |
HR-3-XBC | SMITH | 47 | - | - | - | - | - | - | - |
MYRV-12 | SMITH | 100 | - | - | - | - | - | - | - |
HR-1-1/8-XBC | SMITH | - | - | - | - | - | - | - | - |
HR-3-1/4 | SMITH | - | - | - | - | - | - | - | - |
HR-3-1/4-XB | SMITH | 50.292 mm | - | - | - | - | - | - | - |
DCR-3-1/4 | SMITH | - | - | - | - | - | - | - | - |
MCR-16-SB | SMITH | - | - | - | - | - | - | - | - |
HR-1/2 | SMITH | - | - | - | - | - | - | - | - |
MYRV-20-S | SMITH | 110 | - | - | - | - | - | - | - |
YR-1-SS | SMITH | - | - | - | - | - | - | - | - |
MPCR-30 | SMITH | - | - | - | - | - | - | - | - |
CR-1-1/8-SS | SMITH | - | - | - | - | - | - | - | - |
SMITH MCR-19-S Cam Follower and Track Roller - Stud Type | Bearing Part Number:6901; Holder Surface Treatment:Electroless Nickel P; Seals:VV (Non-Contact Rubb; Days to Ship:7 Days; Bearing Retained:Yes (with retaining; Flange O.D. H(φ):48; Housing Material:1045 Carbon Steel; Bearing Used:Deep Groove Ball Bea; Volume Discount:Available; |
SMITH YAG-14 Cam Follower and Track Roller - Yoke Type | Category:Cam Followers; Roller Lining:No; d:8; Cam Follower Type:Standard; Roller Follower Type:Non-Separable Type; Shaft:No; Roller O.D. D(Ø):16; Days to Ship:6 Days; Roller Type:Spherical Outer Ring; |
SMITH BYR-1-1/8-X Cam Follower and Track Roller - Yoke Type | Lubrication Type:Relubricatable; Outside Ring Width C:21.000 mm; Inner Ring Width B:42.86 mm; Dynamic Load Rating:8130 lbf; Material:Bearing Steel; Bearing Type:Ball Bearing; Number of Set Screws:2; Angle between Set Screws:90 º; Dimension B2:0.720 in; Series:Industrial; |
SMITH HR-1/2 Cam Follower and Track Roller - Stud Type | Number of Bearings:Double; Holder Surface Treatment:Electroless Nickel P; Flange Shape:Compact Type; RoHS:6; Bearing Used:Deep Groove Ball Bea; Bearing Material:[Steel] Steel; Housing Material:1045 Carbon Steel; Type:Bearings with Housin; Flange O.D. H(φ):72; |
SMITH MPCR-72 Cam Follower and Track Roller - Stud Type | Oil Lubrication - B/C/O Seal:400 rpm; Eng Internal Radial Clearance - Max:0.0067; Shaft Size Type:Imperial; Pre Install Clearance Max:0.0067 in; Dimension G:11.188 in; Dimension L Exp:6.56 in; Eng Internal Radial Clearance - Min:0.0053; Dimension C:6.88 in; Full Timken Part Number:99999B; UPC Code:0883450342742; |
SMITH MYRV-10-C Cam Follower and Track Roller - Yoke Type | Holder Surface Treatment:Clear Anodize; RoHS:6; Seals:VV (Non-Contact Rubb; Bearing Retained:Yes (with retaining; Number of Bearings:Single; Type:Bearings with Housin; Shape:T-Shaped; Height Indication:Height Configurable; |
SMITH HR-4-XBC Cam Follower and Track Roller - Stud Type | e - Geometry Factor:0.25; Oil Lubrication - M/N Seal:1800 rpm; Dimension L Fix:3.51 in; Dimension E:5.38 in; Y2 - Geometry Factor:4.00; Pre Install Clearance Max:0.0026 in; Oil Lubrication - T Seal:3200 rpm; Shaft Size :65 mm; Eng Internal Radial Clearance - Min:0.0016; Dimension F:6.63 in; |
SMITH MCR-19-B Cam Follower and Track Roller - Stud Type | D:170 mm; Cg - Geometry Factor5:0.147; e - ISO Factor3:0.46; Cup Part Number:JL724314-B; Da - Cup Frontface Backing Diameter:164.59 mm; Design Units:METRIC; Y - ISO Factor4:1.31; Series:L724300; r - Cup Backface To Clear Radius1:3.30 mm; C1 - Cup Flange Width:5.000 mm; |
SMITH YR-2-1/2-XC Cam Follower and Track Roller - Yoke Type | Jmin:143 mm; L:185.00 mm; End Cover2:EC506-605; Locating Rings (width x OD):SR62X7.5; A:77.00 mm; UPC Code:999999999; Adapter Sleeve1:HE305; H2:22.00 mm; Seal:TSNG605; Bearing:21305K; |
SMITH MCR-16-SBC Cam Follower and Track Roller - Stud Type | Contact angle(Degree):15; Specifications, Environment:Standard; Type symbol:No; Basic Dynamic Load Rating(N):5400; Rolling Element Material:[Steel] Steel; Outer Ring Shape:Flat; Symbol of Bearing Ring Shape:No; Load Direction:Radial; Precision:Grade 5; Bearing Style:Open Type; |
SMITH MCR-16-S Cam Follower and Track Roller - Stud Type | Seal Type:Felt Type; Bolt Size:2 x M20; Bearing Type:Split Cylindrical Re; Ca - Axial Load Rating:2787.59 lbf; Dimension H:100 mm; Pillow/Plummer Block Style:Split Cylindrical Ho; Series Type:Light Series; Shaft Size:3.25 in; Note:This product line wa; Dimension M:100 mm; |
SMITH CR-1-1/4-C Cam Follower and Track Roller - Stud Type | Note:This product line wa; Shaft Size:360 mm; Dimension K:7.5 in; Dimension L:48.0 in; Maximum Speed:460 rpm; Dimension H:18.504 in; Cor - Static Load Rating:1117975 lbf; Cr - Dynamic Load Rating:659814 lbf; Bearing Number:HSM360BX; Housing Width:17.0 in; |
SMITH IRR-1-7/8 Needle Non Thrust Roller Bearings | Seals:ZZ (Double Shield); Holder Surface Treatment:Clear Anodize; RoHS:6; Type:Bearings with Housin; Flange O.D. H(φ):47; Bearing Part Number:628; Number of Bearings:Single; Shape:Flange Type; Bearing Used:Deep Groove Ball Bea; |
SMITH MVCR-26 Cam Follower and Track Roller - Stud Type | Material:Low Carbon Steel; Application:For Outer Ring; I.D. d(φ):20; L(mm):3 ~ 100; Surface Treatment:Electroless Nickel P; L Dimension Tolerance:Positive Tolerance; RoHS:6; Days to Ship:7 Days; O.D. D(φ):26; |
SMITH HR-1-1/2-B Cam Follower and Track Roller - Stud Type | Bearing Used:Deep Groove Ball Bea; Bearing Retained:Yes (with retaining; Seals:DD (Contact Rubber S; RoHS:6; Days to Ship:8 Days; Height Indication:Height Selection; Shape:Bottom Mount; |
SMITH CR-1-7/8-XC-SS Cam Follower and Track Roller - Stud Type | Seal Type:Felt Type; Bearing UPC:013992026613; Weight:74 lb; Maximum Speed:2340 rpm; Bolt Size:2 x M24; Bearing - Housing - Seal:LSE400BRH; Note:This product line wa; Dimension H1:2.0 in; Dimension H:4.921 in; Dimension M:4.0 in; |
SMITH MYRV-12 Cam Follower and Track Roller - Yoke Type Video