| SMITH CR-1-5/8-XC-SS Cam Follower and Track Roller - Stud Type | Da - Cup Frontface Backing Diameter:6.14 in; D:6.7500 in; Design Units:Imperial; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:14500 lbf; Series:835; Cage Type:Stamped Steel; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5:49200 lbf; C - Double Cup Width:3.9375 in; r - Cup Frontface To Clear Radius2:0.03 in; Cg - Geometry Factor11:0.0937; |
| SMITH MCR-16-S Cam Follower and Track Roller - Stud Type | Seal Type:Felt Type; Bolt Size:2 x M20; Bearing Type:Split Cylindrical Re; Ca - Axial Load Rating:2787.59 lbf; Dimension H:100 mm; Pillow/Plummer Block Style:Split Cylindrical Ho; Series Type:Light Series; Shaft Size:3.25 in; Note:This product line wa; Dimension M:100 mm; |
| SMITH CR-7/8 Cam Follower and Track Roller - Stud Type | Cor - Static Load Rating:626992 lbf; Bearing Number:HSE1000BX; Seal Type:High Temperature Pac; Dimension R:31.3 in; Bearing Type:Split Cylindrical Ex; Bearing - Housing - Seal:HSE1000BXHHTPS; Dimension V:0.3 in; Support Type:Round Flange; Dimension L:13.0 in; Dimension P:1.9 in; |
| SMITH MCRV-80 Cam Follower and Track Roller - Stud Type | Dimension N:17 in; Dimension H:4.6 in; Cor - Static Load Rating:262577 lbf; Bearing Type:Split Cylindrical Ex; Dimension P:1.4 in; Bearing - Housing - Seal:LSE808BXHATL; Bearing Number:LSE808BX; Maximum Speed:930 rpm; Bolt Size:4 x M30; Note:This product line wa; |
| SMITH MCRV-52-SBC Cam Follower and Track Roller - Stud Type | Days to Ship:8 Days; Precision Grade Symbol:No; I.D.(Ø):45; Internal Symbol:No; Spacer, Sleeve symbol:No; Inner/Outer Ring Material:[Steel] Steel; Load Direction:Radial; Width(mm):25; Basic Dynamic Load Rating(N):53000; |
| SMITH CR-1-BC-SS Cam Follower and Track Roller - Stud Type | Number of Raceway Ring Rows:Single Row; Bearing Style:Open Type; Low Torque Specification:No; Material Symbol:No; Retainer Type:No; d:40; Spacer, Sleeve symbol:No; Holder Symbol:No; D:68; Combination symbol:No; |
| SMITH BCR-2-1/2-XBC Cam Follower and Track Roller - Stud Type | Material:304 Stainless Steel; L(mm):2 ～ 100; Application:For Inner Ring; Days to Ship:7 Days or more; O.D. D(φ):29; RoHS:6; L Dimension Tolerance:Negative Tolerance; I.D. d(φ):25; |
| SMITH YR-1-SS Cam Follower and Track Roller - Yoke Type | Cage Material:Brass; Y1 - ISO Factor5:2.78; Y2 - ISO Factor6:1.83; Cage Type:YMB; d:560.000 mm; B - Outer Ring Width:355.000 mm; C0 - Static Radial Rating:21800000 N; Reference Thermal Speed Rating (Oil)7:170; Bore Taper:1/30; B - Inner Ring Width:355 mm; |
| SMITH F75 Spherical Plain Bearings - Rod Ends | Type:Bearings with Housin; Bearing Material:[Steel] Steel; Holder Surface Treatment:Black Oxide Coating; Housing Material:1045 Carbon Steel; Bearing Retained:No; Height Indication:Height Configurable; Shape:T-Shaped; |
| SMITH HR-2-B Cam Follower and Track Roller - Stud Type | C1 - Dynamic Radial Rating (1 million revolutions)6:49800 lbf; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:22500 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:8080 lbf; R - Cone Backface To Clear Radius3:0.06 in; Cg - Geometry Factor:0.168; Cage Type:Stamped Steel; C90 - Dynamic Radial Rating (90 million revolutions)5:12900 lbf; B - Cone Width:1.1250 in; G1 - Heat Generation Factor (Roller-Raceway):1030; |
| SMITH FCR-3-1/4-E Cam Follower and Track Roller - Stud Type | Bearing Retained:Yes (with retaining; Shape:T-Shaped; Number of Bearings:Single; Bearing Part Number:6800; Type:Bearings with Housin; Bearing Used:Deep Groove Ball Bea; Width T(mm):10; C Chamfered:Not Provided; |
| SMITH CR-3-1/4-X Cam Follower and Track Roller - Stud Type | ra (max):1.5 mm; Static Load Rating:181,000 N; D:120 mm; Inside Ring Outside Diameter:78.5 mm; Limiting Speed - Grease:4,800 rpm; Fillet Radius/Chamfer:1.5 mm; Da (max):111.5 mm; Configuration:Single Row; d:65 mm; Limiting Speed - Oil:6,000 rpm; |
| SMITH HR-1-B Cam Follower and Track Roller - Stud Type | RoHS:6; Shape:T-Shaped; Bearing Part Number:6203; Bearing Retained:No; Width T(mm):35 ～ 50; Type:Bearings with Housin; Height H(mm):25 ～ 50; Number of Bearings:Double; |
| SMITH BCR-1-X Cam Follower and Track Roller - Stud Type | Axial Load Factor Y1:2.55; Limiting Speed - Grease:2,400 rpm; Fillet Radius/Chamfer:3 mm; Da (max):216 mm; Static Load Rating:915,000 N; Roller Profile:Symmetric; Weight:11.600 kg; Constant e:0.26; Radial Clearance:0.095 to 0.145 mm; Configuration:Double Row; |
| SMITH HR-3/4-X Cam Follower and Track Roller - Stud Type | Width T(mm):12; Volume Discount:Available; Holder Surface Treatment:Black Oxide Coating; Bearing Used:Deep Groove Ball Bea; Housing Material:1045 Carbon Steel; Bearing Retained:Yes (with retaining; Shape:Flange Type; Bearing Part Number:6902; Type:Bearings with Housin; |
| SMITH MCR-40-BC Cam Follower and Track Roller - Stud Type | C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:286000 lbf; R - Cone Backface To Clear Radius3:0.170 in; K - Factor8:1.12; da - Cone Frontface Backing Diameter:8.82 in; C90 - Dynamic Radial Rating (90 million revolutions)5:42600 lbf; Series:93000; C0 - Static Radial Rating:290000 lbf; Design Units:Imperial; a - Effective Center Location4:0.31 in; Ab - Cage-Cone Frontface Clearance:0.21 in; |